• 한국인터넷방송통신학회논문지
• /
• 제9권4호
• /
• pp.115-122
• /
• 2009

화상회의 시스템에 대한 시장의 수요가 매우 빠르게 증가하고 있다 그러나 화상회의 및 음성회의 시스템을 구축하는 비용이 매우 높아 일부 대기업과 관공서를 중심으로 제한적으로 설치되고 있다. 따라서 본 논문에서는 IP-PBX(Private Branch Exchanger)시스템을 이용하여 음성 교환 및 음성회의 그리고 화상회의를 인터넷을 이용하여 하나의 시스템에서 할 수 있도록 한 하이브리드 IP-PBX시스템을 개발하였다. 본 시스템은 통신비용의 저감과 음성 및 화상회의를 할 수 있는 시스템 구축비용을 대폭 저감할 수 있도록 하는 하이브리드형 IP-PBX 설계하여, 그 타당성을 실험을 통하여 입증하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 제13회 신호처리 합동 학술대회 논문집
• /
• pp.47-50
• /
• 2000

In the Multirate DS/CDMA system based on VSL(Variable Spreading Length), the problem of the multiple access interference and effect similar to near-far effects in current system is generated. This problem can degrade performance of the system badly. Therefore, In this paper we proposed Hybrid Interference Cancellation to overcome this problems, Simulation result presents that the proposed Hybrid Interference Cancellation has the better performance than the conventional decorrelator, Parallel Interference Cancellation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 F
• /
• pp.1939-1941
• /
• 1997

In this paper, we simulated the performance of the Cheaju island and developed the hybrid power system based on a least component size design option. This paper performed simulation of economic relation of battery and diesel generation in hybrid power system component.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 봄 학술발표회논문집(II)
• /
• pp.487-492
• /
• 1998

The purpose of this study is to investigate the external joints flexural of hybrid system(RPC) which is consist of precast concrete slabs and cast in site concrete walls. The external joint's specimens were prepared by types of joint detail and were tested under cyclic load which used yielding displacement. The results of external joints of hybrid system showed that the strength capacity of RPC is little different than RC and that the energy dissipation capacity of RPC is similar to RC.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.739-744
• /
• 2001

In this study, experimental research was carried out to develop protective finishing, coating materials and new hybrid technique for deteriorating prevention and high durability in concrete structures. It had sufficiently recommended performance for the protective finishing method of concrete structures through testings. This is more progressive double membrane method than single membrane type designed by conventional method. It was found that this hybrid construction method had very excellent performance to improve the durability of existing concrete structures and attain the beauty of concrete structures.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 춘계학술발표대회 논문집
• /
• pp.191-194
• /
• 2005

Impact properties of glass/Kevlar hybrid composites which have 3-D braided structures were studied. Results were compared to those of composites made of only glass fibers where the same epoxy resin were used as matrix. Absorbed impact energies evaluated through the combination of the data from the impact tester and high speed camera were compared to each other. In order to see the difference between the damaged area distribution CCD camera captures were performed.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2002년도 봄 학술발표논문집 Vol.29 No.1 (A)
• /
• pp.193-195
• /
• 2002

본 논문에서는 최근에 제안된 Hybrid 방식의 모바일 멀티캐스트 프로토콜 중 MOM, MMA, RBMOM, 그리고 TBMOM 프로토콜에 대해서 여러 가지 관점에서 성능을 비교하여 각 프로토콜의 장단점을 분석함과 동시에, 이들 방식이 공통적으로 가지는 DMSP(Designated Multicast Service Provider) 핸드오프 문제에 대해서 Smooth DMSP 핸드오프방식을 제안한다.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2001년도 춘계학술대회
• /
• pp.185-188
• /
• 2001

Many production management systems for increasing productivity, minimizing inventory, keeping due dates and maximizing use of resources have been proposed, and GT, MRP and JIT are frequently used among these systems. The three systems have merits and demerits through comparing with each other. Because each system has mutual dependence, a hybrid production system is necessary for using their merits maximally. In this study, a hybrid production system is designed by combining GT, MRP and JIT, which is suitable in the domestic production system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(II)
• /
• pp.1379-1382
• /
• 1987

IN ADAPTIVE LINEAR PREDICTION, AN ADAPTIVE CAPABILITY IS BUILT INTO THE PROCESSOR SUCH THAT AS THE IMAGE STATISTICS CHANGE, THE PREDICTION FILTER COEFFICIENTS THEMSELVES CHANGE, PRODUCING A NEW FILTER MORE CLOSELY OPTIMIZED TO THE NEW SET OF IMAGES STATISTICS. THE LMS ALGORITHM MAY BE USED TO ADAPT THE COEFFICIENT OF AN ADAPTIVE PREDICTION FILTER FOR IMAGE SOURCE ENCODING. IN THIS PAPER, TWO CODING SYSTEMS USING DPCM AND LMS ALGORITHMS RESPECTIVELY FOR OBTAINING THE FIRST TRANSFORMED COEFFICIENT IN HYBRID CODING ARE COMPARED.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.204-204
• /
• 2006

The interfacial interaction along with microstructure and some properties of the polyimide(PI)/silica or polyimide/silsesquioxane hybrid nanocomposites will be discussed with reviewing recent publications including our own works. Poly(vinyl silsesquioxane) (PVSSQ), aminosilane (APS), and titania can effectively play vital roles to compatibilize the PI/silica hybrid composites by enhancing interfacial interaction or reducing agglomeration of large domains, which helps the formation of nanocomposites for the PI/silica hybrid system.