• 한국정밀공학회지
• /
• 제26권2호
• /
• pp.45-53
• /
• 2009

Today, reduction of $CO_2$ exhaustion gas for global-warming prevention becomes important issues in all industrial fields. Hydraulic systems have been widely used in industrial applications due to high power density and so on. However hydraulic pump is always being operated by engine or electric motor in the conventional hydraulic system. Therefore most of the conventional hydraulic system is not efficient system. Recently, an electro-hydraulic hybrid system, which combines electric and hydraulic technology in a compact unit, can be adapted to a wide variety of force, speed and torque requirements. In the electro-hydraulic hybrid system, hydraulic pump is operated by electric motor only when hydraulic power is needed. Therefore the electro-hydraulic system can reduce the energy consumption drastically when compared to the conventional hydraulic systems. This paper presents a new kind of hydraulic load simulator which is composed of electro-hydraulic hybrid system. Disturbances in the real working condition make the control performance decrease or go bad. QFT controller is designed to eliminate or reduce the disturbance and improve the control performance of the electro-hydraulic load simulator. Experimental results show that the proposed controller is verified to apply for electro-hydraulic hybrid system with varied external disturbances.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 춘계학술대회
• /
• pp.243-247
• /
• 2005

This paper describes an on-going national R&D program for the development of a gas turbine/fuel cell hybrid power generation system and related R&D activities. The final goal of this program is to develop a 200kW-c1ass gas turbine/fuel cell hybrid power generation system and achieve high efficiency over $60\%$ (AC/LHV). In the first phase of the development, a sub-scaled 60kW-class hybrid system based on the 50kW-class microturbine and the 5kW SOFC will be developed for the purpose of concept proof of the hybrid system. Core components such as the microturbine and the SOFC system are being developed and parallel preparation for system integration is being carried out. Before the core components are assembled in the final system. operating characteristics of a hybrid system are investigated from a simulated system where a turbocharger (microturbine simulator) and a modified fuel cell burner test facility (fuel cell simulator) are employed. The 60kW demonstration unit will be built up and operated to provide the valuable information for the preparation of the final full scale 200kW hybrid system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 D
• /
• pp.2880-2882
• /
• 2000

In the case of designing autonomous robot architecture using deliberative and reactive control methods, we can use mixed hybrid form as well as purely reactive scheme or purely deliberative scheme respectively according to its own goal and environment within the robot operates, It needs time and endeavors to design robot control architecture in either case above. In our research, we implemented a 3-dimensional robot simulator in order to help designing reactive/deliberative autonomous robot control architecture by offering methods which is capable of selecting design parameters and confirming its performances. It can be used, of course, to design purely reactive or purely deliberative architecture. The architecture and performance of simulator is shown and a sample hybrid robot architecture designed with the simulator is introduced in this article.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 춘계학술대회
• /
• pp.349-352
• /
• 2005

The energy management of an HEV using optimal control and global optimization is thought to be closest to the best operation of the system. However, there are some controversies on the ways of defining the optimization problems and constituting the optimal control simulators. Here, we presented a simulator which adopts the concept of equivalent fuel economy and leads the vehicle to run in a more efficient way. In order to realize the optimal operation of the HEV and check the validity of the control logics, we also developed a forward-facing simulator. The simulator was developed with the Cruise and MATLAB co-simulation interface. Especially, neural network controller was used for the hybrid control module in the simulator. With the simulator, the optimal operation could be converted into hybrid control rules and the validity of the operation was verified.

• 항공우주시스템공학회지
• /
• 제18권1호
• /
• pp.88-98
• /
• 2024

본 논문에서는 디지털 지형 고도 데이터를 이용한 자동 지형 추종 시뮬레이터를 제안하였다. ATF Simulator는 Flight Simulator, Radar Simulator, TFC Simulator로 구성하였다. 지형 추종에 필요한 지형 정보로 디지털 지형 고도 데이터와 디지털 지형 고도 데이터를 이용하여 생성한 레이다 스캔 데이터를 활용하였다. ATF Simulator는 디지털 지형 고도 데이터를 이용하는 Passive mode, 레이다 스캔 데이터를 이용하는 Active mode, 두 가지 모두 이용하는 Hybrid mode로 세 가지 운용모드를 제공한다. LabVIEW 개발 환경과 MATLAB App Designer 개발 환경을 통해 지형 추종 시스템 개발에 소요되는 비용 및 시간을 줄일 수 있는 ATF Simulator를 개발하였으며 기능요구사항을 충족하는지 확인하여 검증하였다.

• International Journal of Automotive Technology
• /
• 제6권5호
• /
• pp.537-544
• /
• 2005

This paper presents the efficiency measurement and energy analysis for a parallel HEY. Using the HEV test rig, the efficiency of each powertrain component is measured for a given driving cycle including the regenerative braking system. Accompanied by the efficiency measurements, a detailed energy analysis is performed. Based on the efficiency measurement and energy analysis, a HEV performance simulator is developed. Using the simulator, the HEV performance is evaluated for a mild hybrid system. It is expected that the HEV simulator developed can be used to obtain further optimization potentials.

• 대한의용생체공학회:의공학회지
• /
• 제28권6호
• /
• pp.768-776
• /
• 2007

A new type of the fluid circulation blood pressure simulator was proposed to enhance the blood pressure simulator used for the development and evaluation of automatic sphygmomanometers. Various pressure waveform of fluid flowing in the pipe was reproduced by operating the proportional control valve after applying a pressure on the fluid in pressurized oil tank. After that, appropriate fluid was supplied by operating the proportional control valve, which enabled to reproduce various pressure wave of the fluid flowing in the tube. To accomplish this work, the mathematical model was carefully reviewed in cooperating with the proposed simulator. After modeling the driving signal as input signal and the pressure in internal tube as output signal, the simulation on system parameters such as internal volume, cross-section of orifice and supply pressure, which are sensitive to dynamic characteristic of system, was accomplished. System parameters affecting the dynamic characteristic were analyzed in the frequency bandwidth and also reflected to the design of the plant. The performance evaluator of fluid dynamic characteristic using proportional control signal was fabricated on the basis of obtained simulation result. An experimental apparatus was set-up and measurements on the dynamic characteristic, nonlinearity, and rising and falling response was carried out to verify the characteristic of the fluid dynamic model. Controller was designed and thereafter, simulation was performed to control the output signal with respect to the reference input in the fluid dynamic model using the proposed proportional control valve. Hybrid controller combined with an proportional controller and feed-forward controller was fabricated after applying a disturbance observer to the control plant. Comparison of the simulations between the conventional proportional controller and the proposed hybrid simulator indicated that even though the former showed good control performance.

• 한국정보통신학회논문지
• /
• 제21권9호
• /
• pp.1796-1807
• /
• 2017

국내 함정 추진체계는 기계식 추진체계에서 복합식 추진체계로 넘어가는 단계에 위치하고 있으며, 추진체계가 복잡해지면서 함정 추진체계의 제어 감시 기능을 하는 ECS의 기능이 중요해질 것으로 예상된다. 최근 국내에서 ECS(Engineering Control System) 개발의 국산화가 진행되면서 ECS 개발 과정에서 신뢰성 및 안정성에 대한 검증이 요구되고 있다. 제안하는 시뮬레이터는 HILS로 구성되었으며, 모의 목적에 따라 동력전달을 모의하는 축물리모델과, 장비제어를 모의하는 제어기모델, ECS와 통신하는 통신모델로 나누어진다. 본 논문에서는 복합식 추진체계인 CODLOG 체계에 대하여 ECS 검증용 시뮬레이터를 개발하고 시나리오를 설정하여 시뮬레이션을 수행하였다

• International Journal of CAD/CAM
• /
• 제8권1호
• /
• pp.55-62
• /
• 2009

Scene Transition Nets(STN) is a very useful modeling method for discrete-continuous hybrid systems. However, it is difficult to write STN in standard object-oriented programming languages because STN programming requires much skill of object-oriented programming and high knowledge of STN of designers. To overcome this problem, the authors have developed a useful GUI simulator software for modeling and simulations of STN. The experimental results of a transport system including an AGV showed the availability of our software.

• Journal of Welding and Joining
• /
• 제30권4호
• /
• pp.44-48
• /
• 2012

H-beam used for stiffening the upper structure of ocean plant is cut in the various shapes. The cutting process of the H-beam is done manually and requires a long time and high cost. Therefore, automation of H-beam cutting is an important task. This research aims to develop a 3-D simulator to build the automatic H-beam cutting system and to determine the optimal cutting method. The automatic H-beam cutting system composes of 6 robots including 2 cutting robots hang to a crane and 1 conveyer. The appropriate system layout for covering the various sizes and types of H-beam was tested and determined using the simulator. The H-beam cutting system uses a hybrid type of plasma and gas cutting because of special cutting shapes of H-beam. The cutting area of each cutting method should be properly divided according to the size and shape of H-beam to shorten the total cutting time. Additionally the collision between a robot and a robot or a robot and H-beam should be avoided. The optimal cutting method for the shortest cutting time without the collision could be found for the various cutting conditions by use of the simulator. 2 simulation samples shows the availability of the simulator to find the optimal cutting method.