• Korean Journal of Microbiology
• /
• 제37권4호
• /
• pp.312-316
• /
• 2001

To improve the ethanol fermentability, four Saccharomyces yeast strains with efficient ethanol fermentability were subjected to rare-mating and protoplast fusion. Using these 4 strains, 5 different combinations of mating-pair or fusion-pair were constructed and their hybrids or fusants were obtained. From the statistical analysis of the results of the ethanol fermentation by the hybrids of the different mating-pair or fusion-pair, no difference was found in ethanol production, but [S. kluveri $khl{\times}S$ cerevisiae cp3] pair was shown to be the best combination which can produce high cell-viability. In fact, the clone No. 3 of the [S. kluveri $khl{\times}S$ cerevisiae cp3] pair was selected as the best strain which produced ethanol of 10.11% (w/v) or 12.81% (v/v) from 25% (w/v) glucose at $33^{\circ}C$ for 3 days with the residual sugar of 3.53% (w/v), viability of 62.65%, fermentation efficiency of 92.2%.

• Computers and Concrete
• /
• 제13권6호
• /
• pp.709-737
• /
• 2014

Fibre-reinforced self-compacting concrete (FRSCC) is a high-performance building material that combines positive aspects of fresh properties of self-compacting concrete (SCC) with improved characteristics of hardened concrete as a result of fibre addition. To produce SCC, either the constituent materials or the corresponding mix proportions may notably differ from the conventional concrete (CC). These modifications besides enhance the concrete fresh properties affect the hardened properties of the concrete. Therefore, it is vital to investigate whether all the assumed hypotheses about CC are also valid for SCC structures. In the present paper, the experimental results of short-term flexural load tests on eight reinforced SCC and FRSCC specimens slabs are presented. For this purpose, four SCC mixes - two plain SCC, two steel, two polypropylene, and two hybrid FRSCC slab specimens - are considered in the test program. The tests are conducted to study the development of SCC and FRSCC flexural cracking under increasing short-term loads from first cracking through to flexural failure. The achieved experimental results give the SCC and FRSCC slabs bond shear stresses for short-term crack width calculation. Therefore, the adopted bond shear stress for each mix slab is presented in this study. Crack width, crack patterns, deflections at mid-span, steel strains and concrete surface strains at the steel levels were recorded at each load increment in the post-cracking range.

• Steel and Composite Structures
• /
• 제35권5호
• /
• pp.641-657
• /
• 2020

A unique lightweight string truss deployable bridge assembled by thin-walled fiber reinforced polymer (FRP) and metal profiles was designed for emergency applications. As a new structure, investigations into the static structural performance under the serviceability limit state are desired for examining the structural integrity of the developed bridge when subjected to unsymmetrical loadings characterized by combined torsion and bending. In this study, a full-scale experimental inspection was conducted on a fabricated bridge, and the combined flexural-torsional behavior was examined in terms of displacement and strains. The experimental structure showed favorable strength and rigidity performances to function as deployable bridge under unsymmetrical loading conditions and should be designed in accordance with the stiffness criterion, the same as that under symmetrical loads. In addition, a finite element model (FEM) with a simple modeling process, which considered the multi segments of the FRP members and realistic nodal stiffness of the complex unique hybrid nodal joints, was constructed and compared against experiments, demonstrating good agreement. A FEM-based numerical analysis was thereafter performed to explore the effect of the change in elastic modulus of different FRP elements on the static deformation of the bridge. The results confirmed that the change in elastic modulus of different types of FRP element members caused remarkable differences on the bending and torsional stiffness of the hybrid bridge. The global stiffness of such a unique bridge can be significantly enhanced by redesigning the critical lower string pull bars using designable FRP profiles with high elastic modulus.

• Microbiology and Biotechnology Letters
• /
• 제19권1호
• /
• pp.31-36
• /
• 1991

A 7.5 kilobases hybrid plasmid, designated as pCE1301, was constructed by combining Eschurichia cwli plasmid pBELl which carries the kanamycin resistance gene of Tn5 with a cryptic plasmid, pSRl of Corynebacterium glutamicum. pCE1301 was transformed C. glutaicum by PEG-mediated protoplast method and its transformation efficiency was about $3.0\times 10^3$ transformants per $\mu g$ of the hybrid plasmid DNA. The physical map reveals that pCE1301 has single restriction sites for SalI and EcoRl, respectively. 'The kanamycin resistance of pCE1301 was stably maintained in C. glutamicum up to 25 generations and any segregation was not detected. pCI31301 was also introduced into Brevibacterium flavum and E coil, and replicated in those strains. pCE1301 was proved to be useiul in cloning the homoscrine dehydrogenase gene from C. glutamicum.

• The Korean Journal of Zoology
• /
• 제39권2호
• /
• pp.164-172
• /
• 1996

KP elements derived from Korean populations (Seoul, Cheonan and Taegu) of Drosophila melunoguster were examined for their molecular structure. The entire 1.15 kb sequence of the three KP elements KC-137 (Cheonan), KS-95 (Seoul) and KT-99 (Taegu) have been obtained by PCR amplification using inverted repeat primers and DNA sequencing. The 1.15 kb fragments of KP elements were cloned into pCRmll vector plasmids, and subsequently sequenced. The sequence of the three KP elements in these populations suggested that there might have been derived from the complete P element by a 1753 bp internal deletion between positions 808 and 2560. Therefore these KP elements were confirmed to be identical to that isolated from M'10 strains widely distributed in most Eurasian populations of D. melanoguster. Sequence comparison with the 2.9 kb complete P element in pn25.1 revealed that KC-137 has only shown to be two base substitutions of A to G and G to A at positions 62 and 242, respectively. The retained sequence of the two KP elements KS-95 and KT-99 shows complete homology to the P factor in pn25.1. Based on this result, the two base substitutions in KC-137 might be due to Taq DNA pollunerase errors. Finally, it is suggested that the high copy numbers of KP elements provieds an explanation for the suppression of P-mediated hybrid dvssenesis in Korean population of D. melunogoster.

• Journal of Mushroom
• /
• 제19권3호
• /
• pp.251-255
• /
• 2021

The competitiveness of the mushroom industry can be increased by diversifying the domestic Lentinula edodes cultivar. Therefore, 'Chungheung 1ho' was cultivated by hybrid breeding method using strain 'E140025,' which was collected by the Chungheung Mushroom Farming Association. Regarding the morphological characteristics of the fruit, the cap of 'Chungheung 1ho' was smaller than that of the control cultivar, whereas, its stem was longer and thicker than that of the control cultivar. In addition, the weight of the individual fruits of the new cultivar was heavier than that of the control cultivar. The period for primordia formation was 24 days for the new cultivar, which was 16-20 days later than that of the control cultivar. Furthermore, it was found that the patterns of the PCR amplification band using six URP primers were different for 'Chungheung 1ho' than those of the mating strains.

• The Journal of the Korean Society for Microbiology
• /
• 제35권3호
• /
• pp.263-271
• /
• 2000

A clinical isolate of Klebsiella pneumoniae K7746 produced the extended-spectrum ${\beta}$-lactamase (ESBL) SHV-12. A 6.6 kb BamHI fragment containing the $bla_{SHV-12}$ gene of K7746 strain was cloned into pCRScriptCAM vector resulting in the recombinant plasmid p7746-Cl. The restriction map of 3.6 kb inserted DNA and sequences immediately surrounding $bla_{SHV-12}$ of p7746-C1 were homologous to plasmid pMPA2a carrying $bla_{SHV-2a}$. In addition, both $bla_{SHV-12}$ and $bla_{SHV-2a}$ were expressed from a common hybrid promoter made of the -35 region derived from the left inverted repeat of IS26 and the -10 region from the $bla_{SHV}$ promoter itself. The results indicate that $bla_{SHV-12}$ and $bla_{SHV-2a}$ may have evolved from a common ancestor in the sequential order of $bla_{SHV-2a}$ first, followed by $bla_{SHV-12}$. Furthermore, by the PCR mapping method using primers corresponding to the IS26 and $bla_{SHV}$, the association between IS26 and $bla_{SHV}$ was studied in 12 clinical isolates carrying $bla_{SHV-2a}$, 27 clinical isolates carrying $bla_{SHV-12}$, and 5 reference strains carrying $bla_{SHV-1}$ to $bla_{SHV-5}$. All 39 strains carrying $bla_{SHV-2a}$ or $bla_{SHV-12}$ were positive by the PCR, providing confirmative evidence that IS26 has been involved in the evolution and dissemination of $bla_{SHV-2a}$ and $bla_{SHV-12}$. But 5 reference strains carrying $bla_{SHV-1}$ to $bla_{SHV-5}$ were negative by the PCR. Therefore, we concluded that the molecular evolutionary pathway of $bla_{SHV-2a}$ and $bla_{SHV-12}$ may be different from that of other $bla_{SHV-ESBL}$, e.g., $bla_{SHV-2}$, $bla_{SHV-3}$, $bla_{SHV-4}$, and $bla_{SHV-5}$.

• Current Research on Agriculture and Life Sciences
• /
• 제32권3호
• /
• pp.111-117
• /
• 2014

Phytophthora blight caused by Phytophthora capsici Leonian is a dangerous disease threatening pepper growers worldwide. The efficacy of chemical control is generally low as the pathogen is soil-borne and rapidly spread by zoospores during the rainy season. Thus, based on the demand for resistant varieties, various good resistant sources, such as CM334, AC2258, and PI201234, have been reported and their inheritance of resistance studied by many different authorities. However, the mode of inheritance remains unclear, as 1 or 2 independent dominant genes, 3 genes, or multiple genes have all been reported as responsible for resistance. Recently, QTL mappings of the gene factors for resistance have been reported, and molecular markers for resistance used in breeding programs. With the release of many resistant commercial hybrid cultivars, differentiation of pathotypes of the pathogen is attracting interest among breeders and plant pathologists. Various authorities have already classified the pathogen strains into different races according to the inter-action between resistant host plants, including the source of resistance, such as CM334 and PI201234, and resistant commercial varieties and P. capsici isolates. However, no standard differential host sets have yet been established, so the results are good only for the pathogen strains used in the experiments. Thus, for breeding varieties with durable resist-ance, it is important to introduce resistance from different sources and use diverse local pathogen strains collected in the target area for distribution in a breeding program.

• Parasites, Hosts and Diseases
• /
• 제57권1호
• /
• pp.43-47
• /
• 2019

Anaplasma marginale and A. platys were detected and characterized (16S rDNA sequence analysis) from dairy and indigenous cattle, and the latter in domestic dogs in Vietnam. A phylogenetic tree was inferred from 26 representative strains/species of Anaplasma spp. including 10 new sequences from Vietnam. Seven of our Vietnamese sequences fell into the clade of A. marginale and 3 into A. platys, with strong nodal support of 99 and 90%, respectively. Low genetic distances (0.2-0.4%) within each species supported the identification. Anaplasma platys is able to infect humans. Our discovery of this species in cattle and domestic dogs raises considerable concern about zoonotic transmission in Vietnam. Further systematic investigations are needed to gain data for Anaplasma spp. and members of Anaplasmataceae in animal hosts, vectors and humans across Vietnam.

• Composites Research
• /
• 제18권1호
• /
• pp.45-54
• /
• 2005

The delamination in the filament-wound composite flywheel rotor often lowers the performance of the flywheel energy storage system. A conventional ring type hub usually causes tensile stresses on the inner surface of the composite rotor, resulting in lowering the maximum rotational speed of the rotor. In this work, the stress and strain distributions within a hybrid composite rotor were derived from the two-dimensional governing equation with the specified boundary conditions, and an optimum pressure at the inner surface of the rotor was proposed to minimize the strength ratio and maximize the storage energy. A split type hub was introduced to apply the calculated optimum pressure at the inner surface, and a spin test was performed up to 40,000 rpm to demonstrate the performance of the split type hub with radial and circumferential strains measured using a wireless telemetry system. From the analysis and the test, it was found that the split type hub successfully generates a compressive pressure on the inner surface of the rotor, which can enhance the performance of the composite rotor by lowering the strength ratio within the rotor.