• ETRI Journal
• /
• 제37권4호
• /
• pp.685-695
• /
• 2015

This paper proposes a novel video delivery scheme that reduces the bandwidth consumption cost from a video server to terminals in Long-Term Evolution networks. This proposed scheme combines optimized hybrid multicast with a segment-based caching strategy for use in environments where the maximum number of multicast channels is limited. The optimized hybrid multicast, allocation of multicast channels, and cache allocation are determined on the basis of a video's request rate, the related video's length, and the variable cost per unit size of a segment belonging to the related video. Performance evaluation results show that the proposed scheme reduces a video's delivery costs. This work is applicable to on-demand TV services that feature asynchronous video content requests.

• Journal of Communications and Networks
• /
• 제8권2호
• /
• pp.212-219
• /
• 2006

In this paper, a new turbo codes-based hybrid automatic repeat request (TC-HARQ) scheme with segment selective repeat (SSR) is proposed. The main strategy is, upon retransmission, to repeat the data that are most important for the next round of decoding based on the distribution of residual errors after current decoding. The performance in terms of reliability and throughput is analyzed. To adapt to correlated fading channels where an inter-leaver is always employed before transmission, we further modify the SSR strategy so that data having experienced correlated deep fading are selected for retransmission. Finally, this proposed scheme is applied to the wideband code division multiple access (WCDMA) system under frequency selective fading channels. Simulation results demonstrate that in all single and multiple user cases, SSR-based TC-HARQ leads to significant throughput improvement with similar bit error rate (BER) performance as compared to type-I TC-HARQ.

• 한국통신학회논문지
• /
• 제24권12B호
• /
• pp.2320-2334
• /
• 1999

본 논문에서는 최근 들어 본격적인 연구개발이 활성화되고 있는 무선 데이터 통신서비스를 근간으로 한 미세정보 감시 시스템(RMIMS: radio interfaced micro information monitoring system or MICROS: micro information and communication remote object-oriented system)에 대한 QoS(quality of service, ex: packet loss)를 보장하는 새로운 움직이는 다중 기지국(multiple IS-MMBS) 서비스 방법을 제안하였다. MMBS 서비스 지역에서 실시간 트래픽 형태의 RMIMS 터미널 응용서비스가 발생하거나 서비스 지역에 배치되는 RMIMS 터미널 수의 증가 또는 높은 전송대역폭을 요구하는 RMIMS 응용서비스 등으로 인하여 하나의 IS-MMBS 만으로는 기 서비스 중인 RMIMS 터미널 및 신규RMIMS 터미널에 대한 패킷 손실 여부 같은 QoS를 만족하는 서비스가 불가능한 경우가 발생한다. 이러한 경우에 다중 IS-MMBS을 이용하여 RMIMS 터미널의 QoS를 보장하는 MMBS 서비스를 제공할 수 있다. 제안한 다중 IS-MMBS 서비스 모드는 RMIMS 클러스터링 방법과 MMBS 세그먼트(segment) 방법에 따라 터미널 분할방법(terminal segment method), 영역 분할방법(region segment method ), 응용서비스별 분할방법(application based segment method), 트래픽 타입별 분할방법(traffic type based method), 중첩 분할방법(overlapping segment method), 복합 분할방법(hybrid segment method)으로 분류 제안하였다.

• 대한기계학회논문집A
• /
• 제24권9호
• /
• pp.2235-2245
• /
• 2000

The necessity of using rapid prototyping(RP) for short-run manufacturing is continuously driving a development of a cost-effective technique that will produce completely-finished quality parts in a very short time. To meet these demands, the improvements in production speed, accuracy, materials, aid cost are crucial. Thus, a new hybrid-RP system performing both deposition and machining in a station is proposed. For the new hybrid RP process to maintain the same degree of process automation as in currently available processes like SLA or FDNI, a sophisticated process planning system is developed. In the process planner, CAD models(STEP AP203) are partitioned into 3D manufacturable volumes called 'Ueposition feature segment"(DFS) after machining features called "machining feature segmenf'(MFS) are extracted from the initial CAD model. Once MFS and DFS are identified, the process planner arranges them into a chain of processes and automatically generates machining information for each DFS and MFS. The goal of this paper is to present a framework for a process planning system for hybrid RP processes and to outline the geometric algorithms involved in developing such an environment.

• 식물조직배양학회지
• /
• 제28권6호
• /
• pp.341-346
• /
• 2001

본 실험에서 Lilium oriental hybrid 'Casa Blanca'. asiatic hybrid 'Mona'와 longiflorum hybrid 'Hinomoto'의 기내 인편으로부터의 자구 형성 및 비대를 위해 MS 배지 내 무기물 농도를 0.5∼2배로, 배지 내 총 질소 농도를 30∼120 mM로 달리하여 자구 형성과 생장을 조사한 결과 인편으로부터의 자구 형성수는 0.5와 1배의 MS 배지 무기물 농도 또는 30 mM의 총 질소 농도에서 'Mona' 품종이 다른 품종에 비해 가장 많았다. 'Casa Blanca'와 'Hinomoto'에서는 0.5배 MS 무기물 농도 또는 30 mM의 질소 농도가 자구 형성에 가장 효과적이었다. 자구 비대는 2배 MS 무기물 농도 또는 120 mM 총질소 농도에서 3품종 모두 양호하였다.

• Structural Engineering and Mechanics
• /
• 제65권2호
• /
• pp.183-190
• /
• 2018

The prestressed concrete (PSC) technology that was first developed by Freyssinet has significantly improved over the past century in terms of materials and structural design in order to build longer, slender, and more economic structures. The application of prestressing method in structures, which is determined by the pre-tension or post-tension processes, is also affected by the surrounding conditions such as the construction site, workforce skills, and local transportation regulations. This study proposes a prestressed concrete girder design based on a hybrid segment concept. The adopted approach combines both pre-tension and post-tension methods along a simple span bridge girder. The girder was designed using newly developed 2400 MPa PS strands and 60 MPa high-strength concrete. The new concept and high strength materials allowed longer span, lower girder depth, less materials, and slender design without affecting the lateral stability of the girder. In order to validate the applicability of the proposed hybrid prestressed segments girder, a full-scale 35 m girder was fabricated, and experimental tests were performed under various fatigue and static loading conditions. The experimental results confirmed the feasibility of the proposed long-span girder as its performance meets the railway girder standards. In addition, the comparison between the measured load-displacement curve and the simulation results indicate that simulation analysis can predict the behavior of hybrid segments girders.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -2
• /
• pp.1256-1259
• /
• 2002

In this paper, we have proposed license plate recognition system for multi-national vehicle license plate using geometric features along with hybrid and seven segment pattern vectors. In the proposed system, we suggested to find horizontal and vertical relation after going through preparation process with inputted real-time license plate image of Korea and Japan, and then to classify license plate with using characteristic and geometric information of license plates. It classifies the extracted license plate images into letters and numbers, such as local name, local number, classification character and license consecutive numbers, and recognize license plate of Korea and Japan by applying hybrid and seven segments pattern vectors to classified letter and number region. License plate extraction step of the proposed system uses width and length information along with relative rate of Korean and Japanese license plate. Moreover, it exactly segmentation by letters with using each letter and number position information within license plate region, and recognizes Korean and Japanese license plates by applying hybrid and seven segment pattern vectors, containing characteristics related to letter size and movement within segmented letter area. As the result of testing the proposed system in real experiment, it recognized regardless of external lighting conditions as well as classifying license plates by nations, Korea and Japan. We have developed a system, recognizing regardless of inputted structural character of vehicle licenses and external environment.

• Computers and Concrete
• /
• 제22권2호
• /
• pp.209-220
• /
• 2018

In order to evaluate the effect of hybrid fibers on the flexural performance of tunnel segment at room temperature, twelve reinforced self-consolidating concrete (SCC) symmetric inclination beams containing steel fiber, macro polypropylene fiber, micro polypropylene fiber, and their hybridizations were studied under combined loading of flexure and axial compression. The results indicate that the addition of mono steel fiber and hybrid fibers can enhance the ultimate bearing capacity and cracking behavior of tested beams. These improvements can be further enhanced along with increasing the content of steel fiber and macro PP fiber, but reduced with the increase of the reinforcement ratio of beams. The hybrid effect of steel fiber and macro PP fiber was the most obvious. However, the addition of micro PP fibers led to a degradation to the flexural performance of reinforced beams at room temperature. Meanwhile, the hybrid use of steel fiber and micro polypropylene fiber didn't present an obvious improvement to SCC beams. Compared to micro polypropylene fiber, the macro polypropylene fiber plays a more prominent role on affecting the structural behavior of SCC beams. A calculation method for ultimate bearing capacity of flexural SCC symmetric inclination beams at room temperature by taking appropriate effect of hybrid fibers into consideration was proposed. The prediction results using the proposed model are compared with the experimental data in this study and other literature. The results indicate that the proposed model can estimate the ultimate bearing capacity of SCC symmetric inclination beams containing hybrid fibers subjected to combined action of flexure and axial compression at room temperature.

• Journal of Korean Neurosurgical Society
• /
• 제52권5호
• /
• pp.452-458
• /
• 2012

Objective : In the present study, we evaluated the effect, safety and radiological outcomes of cervical hybrid surgery (cervical disc prosthesis replacement at one level, and interbody fusion at the other level) on the multilevel cervical degenerative disc disease (DDD). Methods : Fifty-one patients (mean age 46.7 years) with symptomatic multilevel cervical spondylosis were treated using hybrid surgery (HS). Clinical [neck disability index (NDI) and Visual Analogue Scale (VAS) score] and radiologic outcomes [range of motion (ROM) for cervical spine, adjacent segment and arthroplasty level] were evaluated at routine postoperative intervals of 1, 6, 12, 24 months. Review of other similar studies that examined the HS in multilevel cervical DDD was performed. Results : Out of 51 patients, 41 patients received 2 level hybrid surgery and 10 patients received 3 level hybrid surgery. The NDI and VAS score were significantly decreased during the follow up periods (p<0.05). The cervical ROM was recovered at 6 and 12 month postoperatively and the mean ROM of inferior adjacent segment was significantly larger than that of superior adjacent segments after surgery. The ROM of the arthoplasty level was preserved well during the follow up periods. No surgical and device related complications were observed. Conclusion : Hybrid surgery is a safe and effective alternative to fusion for the management of multilevel cervical spondylosis.

• 접착 및 계면
• /
• 제20권4호
• /
• pp.146-154
• /
• 2019

본 연구에서는 소수성 PPO 사슬과 친수성 PEO 사슬들이 동시에 존재하고, 반응성 알콕시 실란기를 가지고 있는 알콕시 실란 기능화 양친성 고분자 전구체 (Alkoxysilane-functionalized Amphiphilic Polymer, AFAP)를 합성하여, 이를 TEOS과의 Hydrolysis- Polycondensation 반응에서 분산안정제 및 반응속도 조절제로 이용하여서 유-무기 하이브리드 나노입자가 안정적으로 분산된 졸 (Sol)을 제조하였다. 제조된 Sol에 불소 함유 실란화합물을 혼합·반응하여서 불소함유 유-무기 하이브리드 Sol을 제조하였고, 이를 유리 기재에 코팅하고 저온 경화를 통해 기재위에 경화필름을 형성하였다. 형성된 경화 필름은 AFAP 및 불소 함유 실란화합물의 첨가량, 용매 종류에 따라서 표면 경도 및 발수 특성이 변화하였다. 최적의 용매 및 불소 함유 실란화합물 첨가량에서 태양전지나 디스플레이에 적용가능한 투명하면서도 견고한 유-무기 하이브리드 형태의 코팅필름 형성이 가능하였다.