• 한국전자파학회논문지
• /
• 제19권2호
• /
• pp.181-190
• /
• 2008

본 논문에서는 BPSK 수신기를 제작함에 있어서 기존에 사용하던 6-port 수신기를 대신하여 4-port 수신기를 이용할 수 있음을 제안한다. 위의 수신기를 제작함에 있어서 1 Mbps의 데이터 율을 가지는 임의의 신호를 입력으로 사용하였고, 중심 주파수는 2.45 GHz에서 동작하는 직접 변환 수신기를 제작하였다. 수신기의 비교기는 OPA-847을 사용하여 제작하였다. 위의 실험을 바탕으로 BPSK 수신기 제작에 있어서 4-port수신기의 동작 특성이 6-port 수신기 만큼의 효과를 나타냄을 보인다.

• 한국항해항만학회지
• /
• 제27권2호
• /
• pp.185-191
• /
• 2003

본 연구의 목적은 아시아 주요항만의 특성을 종합적으로 분석/분류하는 것이다. 특히, 본 연구에서는 기존연구가 지닌 연구대상 선정과 관련한 문제점을 극복하기 위해, 객관적인 지표에 의거하여 부산항이 속한 아시아 주요 대상 항만을 선정했다. 그리고, 연구 방법론의 측면에서 기존연구의 계층평가 알고리즘을 이용한 항만평가와 군집분석법을 이용한 연구의 경우 상호보완적인 장/단점을 지니고 있어, 두 가지 알고리즘을 연계하여 아시아 항만의 전체적인 판도와 항만의 경쟁력 순위 등을 종합적으로 고찰했다. 또한, 본 연구에서는 일반군집분석법에 퍼지 알고리즘을 적용한 FC<(Fuzzy C-Means)법을 이용하여, 기존 방법보다 다양한 고찰이 가능케 하였다. 분석결과, 아시아 16개 주요 항만들 중 10개 항만이 독자적이 위상을 가지고 6가지 항만군을 형성하고 있었으며, 순위면에서 싱가폴항, 홍콩항, 부산항 카오슝항이 높은 경쟁력을 가지고 있었다. 특히, 부산항과 카오슝은 여러 가지 특성에서 유사하여 동일 항만군으로 분류되었고, 싱가폴하엥 이어 2번째로 높은 경쟁력을 보유한 항만군을 형성하고 있는 것으로 파악되었으나, 경쟁력 면에서 싱가폴항과의 격차는 큰 것으로 파악되었다.

• 한국항공운항학회지
• /
• 제14권4호
• /
• pp.17-23
• /
• 2006

This paper describes the preliminary design procedure for the hybrid propulsion system. For a given mission defined by velocity increment, the design of a polyethylene/LOX hybrid rocket was implemented. In addition, Seven-cluster multi-port fuel-grain was considered. After determining the system size including the combustion chamber, the performance parameters such as specific impulse, thrust, characteristic velocity, and thrust coefficient can be predicted by using empirical regression rate correlation, though most of preliminary design code assume constant regression rate. The results of the performance prediction indicated that besides the widely used HTPB/LOX, polyethylene/LOX hybrid motor can be a viable alternative to the more widely used SRMs.

• 대한전자공학회논문지TC
• /
• 제42권3호
• /
• pp.33-38
• /
• 2005

본 논문에서는 표면 마이크로 머시닝 기법으로 구현된 DAML (Dielectric-supported Airbridge Microstrip Line) 형태의 새로운 구조를 이용하여 $180^{\circ}$ 링 하이브리드 결합기를 설계 및 제작 하였다. DAML 구조로 이용하여 제작된 결합기는 60 GHz 중심 주파수에서 3.58 dB의 S31과 3.31 dB의 S21과 61 GHz에서 16.17 dB 이상의 S11과 55 dB 이상의 S41를 얻을 수 있다. 결합기의 크기를 줄이기 위하여 slow wave 구조가 삽입된 결합기를 설계 제작하였으며 크기를 $33\%$ 정도 줄일 수 있는 효과를 얻을 수 있었다.

• Journal of Power Electronics
• /
• 제17권6호
• /
• pp.1433-1444
• /
• 2017

A family of non-isolated DC-DC three-port converters (TPCs) that allows for a more flexible power flow among a renewable energy source, an energy storage device and a current-reversible DC bus is introduced. Most of the reported non-isolated topologies in this area consider only a power consuming load. However, for applications such as hybrid-electric vehicle braking systems and DC microgrids, the load power generating capability should also be considered. The proposed three-port family consists of one unidirectional port and two bi-directional ports. Hence, they are well-suited for photovoltaic (PV)-battery-DC bus systems from the power flow viewpoint. Three-port converters are derived by combining different commonly known power converters in an integrated manner while considering the voltage polarity, voltage levels among the ports and the overall voltage conversion ratio. The derived converter topologies are able to allow for seven different modes of operation among the sources and load. A three-port converter which integrates a boost converter with a buck converter is used as a design example. Extensions of these topologies by combining the soft-switching technique with the proposed design example are also presented. Experiment results are given to verify the proposed three-port converter family and its analysis.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2011년도 추계학술대회
• /
• pp.162-163
• /
• 2011

This paper presents the system dynamics methodology for modeling and control the production/inventory system. Under system dynamics point of view, we can apply some production/inventory policies as if we use the control laws for dynamics systems, then the behavior of system is analyzed and evaluated to improve the performance of production/inventory system. We also utilize the hybrid modeling method for the dynamic of production system with the combination of Matlab/Simulink and Matlab/Sateflow. Finally, the numerical simulation results are carried out in Matlab/Simulink environment and compare with the results from other works. It is shown that our approach can obtain some good performances (such as operational cost, stability of inventory, customer service level).

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.1
• /
• pp.115-120
• /
• 2006

This article propose a new idea of developing a hybrid scheme to achieve faster INS alignment with higher accuracy using a novel procedure to estimate the initial attitude angles that combines a Kalman filter and Adaptive Neuro-Fuzzy Inference System architecture. A tactical grade inertial measurement unit was applied to verify the performance of proposed scheme in this study. The preliminary results indicated the outstanding improvements in both time consumption for fine alignment process and accuracy of estimated attitude angles, especially in heading angles. In general, the improvement in terms of time consumption and the accuracy of estimated attitude estimated accuracy reached 80% and 70% respectively during alignment process after compensating the attitude angles estimated by an extended Kalman filter with 15 states using proposed approach. It is worth mentioned that the proposed approach can be implemented in general real time navigation applications.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.1
• /
• pp.265-270
• /
• 2006

Recently, inertial sensors like gyros and accelerometers have been quite miniaturized by Micro Electro-Mechanical Systems (MEMS) technology. JAXA is developing a MEM-based GPS/INS hybrid navigation system named Micro-GAIA. The navigation performance of Micro-GAIA was evaluated through off-line analysis by using flight test data. The estimation errors of the roll, pitch, and azimuth were $0.03^{\circ}$, $0.05^{\circ}$, $0.05^{\circ}$ $(1{\sigma})$, respectively. he horizontal position errors after 60-second GPS outages were reduced to 25 m CEP. The attitude errors and position errors are nearly half of ones reported previously[2]. Furthermore, using the adaptive Kalman filters, the robustness against the uncertainty of the measurement noise was improved. Comparing the innovation-based and residual-based adaptive Kalman filters, it was confirmed that the latter is robuster than the former.

• 한국항만학회지
• /
• 제7권1호
• /
• pp.79-88
• /
• 1993

This study deals with the case of a fixed floating structure(FFS) at the mouth of a rectangular harbor under the action of waves represented by the linear wave theory. Modified forms of the mild-slope equation is applied to the propagation of regular wave over constant water depth. The model is extended to include bottom friction and boundary absorption. A hybrid element approximation is used for calculation of linear wave oscillation in and near coastal harbor. Modification of the model was necessary for the FFS. For the conditions tested, the results of laboratory experiments by Ippen and Goda(1963), and Lee (1969) are compared with the calculated one from this model. The cases of flat cylinderical structures, both fixed and floating, were taken to be in an intermediate water depth.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 1996년도 The Korean Institute of Navigation 1996년도 한·중 국제학술 심포지움 및 추계학술발표회 논문집
• /
• pp.89-94
• /
• 1996

In this paper A methode for design of hybrid-ring couplers having sections of lenth λ/n is proposed. Assuming only one - axis symmitry and isolation of output arms general expressions for the scattering parameters are obtained. The new design method using λ/n sections for 3 dB couplers is derived, . The calculated frequency reponse of the new design has been compared with that of conventional ones, . A new design using λ/5 section and having an overall length 13λ/10 is found to be superior to the 7λ/6 design is expected to have a low insertion loss by virtue of its shorter length.