• 대한치과기공학회지
• /
• 제29권1호
• /
• pp.121-131
• /
• 2007

A preparation process's conditions of aqueous sol which contains anatase-type nano titania particles with photocatalyic properties was established by using Yoldas process, so called, DCS(Destabilization of Colloidal Solution) process in this study. And crystal size change and phase transformation of titania particles in aqueous titania sol depending on reaction conditions was investigated by a light scattering method and XRD analysis of frozen dried powders, respectively. This sol with photo catalytic nano titania particles was used to the following hydrophilic hybrid coating film's fabrication and its properties was evaluated. Subsequently, for coating film using the above mentioned aqueous titania sol, non-aqueous titania sol was prepared without any chemical additives and its time stability according to aging time was investigate. By using the above mentioned aqueous titania sol and non-aqueous sol, a complex oxide coating sol for metal and ceramic substrate and a organic-inorganic hybrid coating sol for polymer substrate was prepared and it's hydrophilicity depending on UV irradiation conditions was evaluated. As a conclusions, the following results were obtained. (1)Aqueous titania sol The average particle size of titania in formed aqueous titania sol was distributed between 20$\sim$90nm range depending on reaction conditions. And the crystal phase of titania powders obtained by frozen drying method was changed from amorphous state to anatase and subsequently transformed to rutile crystal phase and it is attributed to concentration gradient in aqueous sol. (2)Non-aqueous titania sol Non-aqueous titania sol was prepared using methanol as a solvent and a little distilled water for hydrolysis and nitric acid as a catalyst were used. The obtained non-aqueous titania sol was stable at room temperature for 20 days. Additionally, non-aqueous titania sol with addition of chealating reagent such as acethylaceton and ethylene glycol prolonged the stability of sol by six months. (3)Complex sol and hybrid sol with super hydrophilicity The above mentioned aqueous titania sol as a main photocataylic component and non-aqueous titania sol as a binder for coating process was used to prepare a complex sol used for metal, ceramic and wood material substrate and also to prepare the organic-inorganic hybrid sol for polymer substrate such as polycarbonate and polyethylene, in which process APMS(3-Aminopropyltrimethoxysilane), GPTS(3-Glycidoxypropyl-trimethoxysilane) as a hydrophilic silane compound and HEMA(2-Hydroxyethyl methacrylate) as a forming network in hybrid coating film were used. The hybrid coating film such as prepared through this process showed a superhydrophilicity below 1$10^{\circ}$ depending on processing conditions and a pencil's hardness over 6 H.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.727-729
• /
• 2007

Inorganic-organic hybrid polymer provides various advantages including low-temperature process, high dielectric constant and direct photo-patterning. The hybrid dielectric was synthesized by the sol-gel process in which an acid-catalyzed solution of Si alkoxide and Zr alkoxide was used as a precursor. The electrical performance of transistors with hybrid dielectric was investigated.

• Journal of Ceramic Processing Research
• /
• 제13권spc2호
• /
• pp.428-432
• /
• 2012

Polyamidimide (PAI)-colloidal silica (CS) nanohybrid films were synthesized by an advanced sol-gel process. The synthesized PAI-CS hybrid films have a uniform and stable chemical bonding and there is no interfacial defects observed by TEM. The thermal degradation ratio of PAI-CS (10 wt%) hybrid films is delayed by 100 ℃ compared with pure PAI sample determined by on set temperature range in TGA. The dielectric constant of PAI-CS (10 wt%) hybrid films decreases with increasing CS content up to about 5 wt% but increases at higher CS content, which is not explained simply by effective medium therories (EMT). The duration time of PAI-CS (10 wt%) hybrid coil is 38 sec, which is very longer than that of pure PAI coil sample. The PAI-CS (10 wt%) hybrid film has a higher breakdown voltage resistance than the pure PAI film at surge environment and exhibits superior heat resistance. The PAI-CS (10 wt%) sample shows the advanced and stable thermal emission properties in transformer module compared with the pure PAI sample. This result illustrates that the advanced thermal conductivity and expansion properties of PAI-CS sample in the case of appropriate sol-gel processes brings the stable thermal emission in transformer system. Therefore, new PAI-CS hybrid samples with such stable thermal emission properties are expected to be used as a high functional coating application in ET, IT and electric power products.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 춘계학술발표대회
• /
• pp.237.2-237.2
• /
• 2011

SAW-ED를 이용하는 박막공정 기술을 통하여 나노레벨의 SWCNT 와 PEDOT의 thin film 및 hybrid화된 film구조를 얻을 수 있었다. SWCNT와 전도성고분자와의 hybridization을 통해 균일상의 표면 morphology를 갖는 고전도성 투명 필름을 제작하고, 이들의 전기광학적 성질을 확인하였다. SAW-ED를 이용하는 박막공정 기술은 나노입자 및 나노구조물의 박막화 패턴화를 포함하는 새로운 deposition 기술로서의 응용성을 가지고 있으며, 본 연구에서는 SWCNT와 전도성고분자를 이용하여 이를 확인하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1463-1465
• /
• 2008

We report all-ink-jet printed inorganic/organic hybrid TFTs on plastic substrates. We have investigated the optimal printing conditions to make uniform patterned layers of gate electrode, dielectrics, source/drain electrodes, and semiconductor as a coplanar type TFT in a successive manner. All ink-jet printed devices have good mechanical flexibility and current modulation characteristic even when bent.

• 한국정밀공학회지
• /
• 제32권10호
• /
• pp.903-909
• /
• 2015

In this study, we used GO (graphene oxide) in order to enhance the adhesion between Ag NWs (nanowires) and substrates. By using a mixture solution of GO and Ag NW, a vacuum filtration process was used to fabricate a 50nm diameter thin film. Next, by using a light annealing process, the mechanical and electrical stability of Ag NW network was improved without any other treatment. The physical properties of the Ag NW - GO hybrid transparent conductive thin film was characterized in terms of a bending test, resistance and transmittance test, and nanoscale imaging using field-emission scanning electron microscopy.

• 폴리머
• /
• 제35권5호
• /
• pp.402-408
• /
• 2011

$Na^+$-사포나이트(saponite, SPT) 필름의 유연성을 향상시키기 위해 수용성 고분자인 폴리(비닐 알코올)(poly(vinyl alcohol); PVA)을 다양한 함량(0~10 wt%)으로 사용하여 용액 삽입방법을 통해 SPT 하이브리드 필름을 제조하였다. 본 논문에서는 SPT 하이브리드 필름의 열적 광학적 성질, 모폴로지, 및 가스 투과성 등을 조사하였다. PVA 농도에 따른 SPT 하이브리드 필름의 성질들은 X-선 회절도(XRD), 전계방사형 주사전자현미경(FE-SEM), 시차주사 열량계(DSC), 열중량 분석기(TGA), 열기계 분석기(TMA), 자외선-가시광선(UV-vis.) 흡광도기, 및 산소투과($O_2$TR) 측정기 등을 통해 조사하였다. SPT 하이브리드 필름의 성질들은 PVA의 무게% 농도에 따라 많은 영향을 받았으며, 적은 양의 PVA도 SPT 하이브리드 필름의 유연성을 증가시키기에 충분하였다.

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 1986년도 Priceedings Of The Third Korea-Japan Seminar On New Ceramics
• /
• pp.237-255
• /
• 1986

The thick and thin film hybrid microcircuit technologies are reviewed. The materials, te processing conditions and the final properties of thick and thin film conductors, resistors dielectrics are discussed.

• 폴리머
• /
• 제38권5호
• /
• pp.573-579
• /
• 2014

탄소나노튜브(CNT), 불소계 아크릴레이트 2,2,2-trifluoroethylmethacrylate(3FMA) 및 유-무기 조성비와 같은 합성조건을 달리하여 제조된 자외선 경화형 유-무기 하이브리드 코팅 막의 표면특성 및 내오존성에 대해 연구하였다. 코팅 막은 금속 알콕사이드 전구체인 tetraethoxysilane(TEOS)와 실란 커플링제인 methacryloyloxypropyltrimethoxysilane (MPTMS)로 구성된 유-무기 혼성 용액에 탄소나노튜브 및 3FMA와 자외선 경화를 위한 유기물을 첨가하여 제조된 코팅제를 자외선 경화시켜 제조하였다. 제조된 코팅 막의 내오존성 및 기재와의 접착력은 TEOS, 3FMA 및 CNT의 함량에 크게 영향을 받는다는 것을 확인하였다. 특히, 탄소나노튜브가 첨가된 코팅 막은 우수한 내오존성 및 접착력 뿐만 아니라 높은 표면경도를 나타내었다. TEOS의 경우, 함량이 증가할수록 표면경도 및 내오존성은 향상되었지만, 기재와의 접착력은 감소되었다. 불소아크릴레이트 3FMA의 경우, 함량이 증가할수록 내오존성은 향상되었지만 표면경도는 감소하였다.

• 한국표면공학회지
• /
• 제43권6호
• /
• pp.272-277
• /
• 2010

We investigated the life time characteristics of OLED device with aluminium oxide ($AlO_x$) passivation film on glass substrate and polyethylene terephthalate (PET) substrate by RF magnetron sputtering for the transparent barrier film applied to flexible OLED device. Basic buffer layer was determined as $Alq_3$(500 nm)-LiF(300 nm)-Al(1200 nm), and the most suitable aluminium oxide ($AlO_x$) film have been formed when the partial volume ratio of oxygen was 20% and the sputtering power was 100 watt and the minimum thickness of buffer was $2\;{\mu}m$. $AlO_x$/epoxy hybrid film was also used as a effective passivation layer for the purpose of improving life time characteristics of OLED devices with the glass substrate and the plastic substrate. Besides, the simultaneous deposition of $AlO_x$/epoxy film on back side of PET could result in better improvement of life time.