• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.10a
• /
• pp.29-34
• /
• 1995

The good features of the analytic function expansion nodal (AFEN) method are utilized to develop a practical scheme jot the multigroup diffusion problems, in combination with the polynomial expansion nodal (PEN) method. The thermal group fluxes exhibiting strong gradients are solved by the AFEN method[1-6], while the fast group fluxes that are smoother than the thermal group fuzes are solved by the PEN method[7-9]. The scheme is applied to a MOX-fuel loaded core with good results.

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 2003.08a
• /
• pp.58-62
• /
• 2003

기존의 혼합요소모형(박 등, 1994; Demirbilek and Panchang, 1998)은 반원형태의 정합경계에 파고와 파향을 일정하게 입력하게 되어 있기 때문에 보다 정확한 계산결과를 확보하기 위해서는 정합경계가 되도록이면 심해파 해역에 위치하는 것이 유효하다. 그러나, 국내의 남ㆍ서해안과 같은 지역은 심해역이 육지로부터 상당거리 떨어져 있으므로, 정합경계가 심해파 해역조건에 위치하게 되면 계산 Mesh의 수가 막대하게 되어 계산기 용량초과 및 계산속도 저하가 초래된다. (중략)

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2702-2704
• /
• 2001

In this Letter, we propose a comprehensive design methodology of hybri'd Fuzzy controllers (HFC). The HFC comes as a form of a convex combination of a standard PID controller and a fuzzy controller. The design procedure dwells on the use of evolutionary computing (genetic algorithm) and an auto-tuning algorithm. The tuning of the scaling factors of the HFC is an essential component of the entire optimization process. A numerical study is presented and a detailed comparative analysis is also included.

• Environmental and Resource Economics Review
• /
• v.15 no.4
• /
• pp.693-712
• /
• 2006

A pre-feasibility test is done for renewable energy hybrid power systems at off~grid islands in which the current power supply is provided only by diesel generation. We apply Homer (Hybrid Optimization Model for Electric Renewables) which was developed by the National Renewable Energy Laboratory (NREL) for the analysis to identify the cost-minimizing combination of power generating facilities for the given load profiles. Chuja-Do, Geomun-Do and Youngsan-Do have been selected for our analysis considering the wind resources data of the Korea Institute of Energy Research (KIER). Information on wind speed, solar radiation and temperature is also used for the analysis. System component cost information from overseas market has been used due to the lack of domestic information. Site specific Load profile for electricity demand for those islands are reconstructed based on the partial survey results obtained form other sources. The LCOE of the least cost hybrid power systems for Chuja-Do, Geomun-Do and Youngsan-Do are $0.278/kWh, $0.234/kWh and $0.353/kWh, respectively Considering the fact that diesel generation is being subsidized at the price of $0.300/kWh by the government, first 2 cases are economically feasible for the introduction of renewable energy hybrid systems to those islands. But the third case of Youngsan-Do does not meet the criteria. The basic differences of these pre-feasibility test results are from the differences of the site specific renewable energy conditions, especially wind resources. In summary, promoting hybrid systems in the off-grid remote island should be based on the economic feasibility test results. Not all the off-grid islands are feasible for introducing this renewable energy hybrid system.

• Korean Journal of Breeding Science
• /
• v.43 no.1
• /
• pp.62-67
• /
• 2011

This study was carried out to gain basic informations about amylogram, antioxidant activity function and physicochemical properties for kernel of the newly developed waxy corn hybrids. The used materials were produced in 2008 and cultivated at breeding farm of CNU in 2009. From amylogram analysis, peak and minimum viscosity of the used hybrids were appeared in CNU08H-71 and CNU08H-69 hybrid, respectively. DPPH free radical scavenging effect marked as election donating ability was highly appeared in CNU08H-15 and CNU08H-69 hybrid, while CNU08H-h102 hybrid was the lowest. Hardness of kernel was highly appeared in CNU08H-35 hybrid, and chewiness and gumminess were also the highest in this hybrid, but those of CNU08H-h105 hybrid were the lowest. In these facts, we confirmed that the used hybrids were very different among traits related to amylogram, functions and table qualities. Accordingly, development of the new waxy corn hybrid will be profitable to select and develop as a crossing combination including many excellent traits.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.1
• /
• pp.155-164
• /
• 2015

In this paper, two rotor configurations including different amount of magnet and reluctance parts are presented. The rotors are constituted by means of a flexible hybrid motor structure. Considerable features of the hybrid structure are that the combination of the magnet and reluctance parts can be suitably modified and the mechanical angle (${\beta}$) between the parts can also be varied. Two hybrid rotor configurations have been considered in this study. First, finite element (FE) simulations were carried out and the torque behaviors of the motors were predicted. The average torque ($T_{avg}$) and maximum torque ($T_{max}$) curves were obtained from FE simulations in order to find suitable ${\beta}$. Mathematical model of the motors was formed in terms of a,b,c variables considering the amount of the magnet and reluctance parts on the rotor and simulations were performed. Rotor prototypes, motor drive and drive method were introduced. Torque profiles of the motors were obtained by static torque measurement and loaded tests were also realized. Thus, simulation results were verified by experimental study. There is a good match between predictions and measurements. The proposed motors are operated with electrical $120^{\circ}$ mode as a brushless DC motor (BLDC) and torque versus speed characteristics show a compound DC motor characteristic. The motors can be named as brushless DC compound motors.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.1
• /
• pp.35-42
• /
• 2010

Geo-location using a cellular network is a core technology for LBS together with GPS. With preamble symbols broadcasted in each frame, geo-location using WiBro network can be easily implemented. Because the WiBro network has a cellular structure, it is difficult for a mobile station to detect signals from multiple base stations. In order to get user position using trilateration, long integration techniques for sensitivity enhancement should be employed. This paper presents hybrid integration scheme for WiBro network. By analyzing coherent and non-coherent integration loss according to frequency residual and SNR respectively, optimal combination of the hybrid integration is proposed. Simulation results show that the hybrid integration method is profitable in WiBro network when the frequency residual is estimated and compensated accurately.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.136.1-136.1
• /
• 2015

In the present study, UHF (320 MHz) in combination with RF (13.56 MHz) plasmas was used for the synthesis of hydrogenated silicon nitride (SiNx:H) films by PECVD process at low temperature. RF/UHF hybrid plasmas were maintained at a fixed pressure of 410 mTorr in the N2/SiH4 and N2/SiH4/NH3 atmospheres. To investigate the radical generation and plasma formation and their control for the growth of the film, plasma diagnostic tools like vacuum ultraviolet absorption spectroscopy (VUVAS), optical emission spectroscopy (OES), and RF compensated Langmuir probe (LP) were utilized. Utilization of RF/UHF hybrid plasmas enables very high plasma densities ~ 1011 cm-3 with low electron temperature. Measurements using VUVAS reveal the UHF source is quite effective in the dissociation of the N2 gas to generate more active atomic N. It results in the enhancement of the Si-N bond concentration in the film. Consequently, the deposition rate has been significantly improved up to 2nm/s for the high rate synthesis of highly transparent (up to 90 %) SiNx:H film. The films properties such as optical transmittance and chemical composition are investigated using different analysis tools.

• Environmental Mutagens and Carcinogens
• /
• v.22 no.3
• /
• pp.175-182
• /
• 2002

Endocrine disruptors (EDs) are the chemicals that affect endocrine systems through activation or inhibition of steroid hormone response. It is necessary to have a good system to evaluate rapidly and accurately endocrine-disrupting activities of suspected chemicals and their degradation products. The key targets of EDs are nuclear hormone receptors, which bind to steroid hormones and regulate their gene transcription. We constructed a co-expression system of Gal4p DNA binding domain (DBD)- ligand binding domain of human estrogen receptor $\alpha$ or $\beta$, and Gal4p transactivation domain (TAD)-co-activator AIB-1, SRC-1 or TIF-2 in Saccharomyces cerevisiae with a chromosome-integrated lacZ reporter gene under the control of CYC1 promoter and Gal4p binding site (GAL4 upstream activating sequence, GAL4$_{UAS}$). Expression of this reporter gene was dependent on the presence of estrogen or EDs in the culture medium. We found that the two-hybrid system with combination of the hER$\beta$ LBD and co-activator SRC-1 was most effective in the xenoestrogen-dependent induction of reporter activity. The extent of transcriptional activation by those chemicals correlated with their estrogenic activities measured by other assay systems, indicating that this assay system is efficient and reliable for measuring estrogenic activity. The data in this research demonstrated that the yeast detection system using steroid hormone receptor and co-activator is a useful tool for identifying chemicals that interact with steroid receptors.s.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.11a
• /
• pp.12.1-12.1
• /
• 2009

Nano-hydroxyapatite (N-HAp)has shown the pivotal role in producing bone-regenerative materials since it has similarity to natural bone minerals in terms of size, morphology, and the composition. Currently, the combination of biopolymers and N-HAp is recognizedas an attractive approach in generating hybrid scaffolds for bone tissueengineering. Surface engineering is an important issue since it determines whether cells can effectively adhere and proliferate on porous scaffolds. We aim to develop a synthetic approach to porous 3D scaffolds by immobilizing N-HAp on pore surfaces. The discrete nano-level anchoring of N-HAp on the scaffold pore surface is achieved using surface-repellent stable colloidal N-HAp with surface phosphate functionality. This rational surface engineering enables surface-anchored N-HAp to express its overall intrinsic bioactivity,since N-HAp is not phase-mixed with the polymers. The porous polymer scaffolds with surface-immobilized N-HAp provide more favorable environments thanconventional bulk phase-mixed polymer/N-HAp scaffolds in terms of cellular interaction and growth. In vitro biological evaluation using alkalinephosphatase activity assay supports that immobilized N-HAp on pore surfaces of polymer scaffolds contributed to the more enhanced in vitro osteogenicpotential. Besides, the scaffolds with surface-exposed N-HAp provide favorable environments for enhanced in vivo bone tissue growth, estimated by characteristic biomarkers of bone formation such as collagen. The results suggest that newly developed hybrid scaffolds with surface-immobilized N-HApmay serve as a useful 3D substrate with pore surfaces featuring excellent bonetissue-regenerative properties. Acknowledgement. This research was supported by a grant (code #: 2009K000430) from 'Center for Nanostructured Materials Technology' under '21st Century Frontier R&D Programs' of the Ministry of Education, Science and Technology, Korea.