• Journal of KIISE:Databases
• /
• v.34 no.2
• /
• pp.166-178
• /
• 2007

The ALE specification of EPCglobal is leading the development of RFID standards, includes the Event Cycle Specification (ECSpec) describing how long a cycle is, how to filter RFID tag data and which reader is interested in. The ECSpec is a specification for filtering and collecting RFID tag data. It is registered to a middleware for long time and is evaluated to return results satisfying the requirements included in it. Thus, it is quite similar to the continuous query. It can be transformed into a continuous query as its predicate in WHERE clause is characterized by the long interval. Long intervals cause problems deteriorating insertion and search performance of existing query indices. In this paper, we propose a TLC-index as a new query index structure for long interval data. The TLC-index has hybrid structure that uses the cell construct of CQI-index with the virtual construct of VCR-index for partitioning long intervals. The TLC-index can reduce the storage cost and improve the insertion performance through decomposing long intervals into one or more cell constructs that have long size. It can also improve the search performance through decomposing short intervals into one or more virtual constructs that have short size enough to fit into those intervals.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.3
• /
• pp.585-593
• /
• 2020

Until now, 29 fire accidents have occurred; 22 of them were caused by the interconnection of renewable energy sources that occurred during the rest period after the lithium-ion battery had been fully charged regardless of the seasons. The fire accidents of ESS were attributed to thermal runaway due to the overcharging of a few cells with the phenomenon of self-energy balancing, which is unintentional current flow from cells with a high SOC to the low cells if the SOC condition of each cell connected in parallel is different. Therefore, this paper proposes a novel configuration and operation algorithm of the BMS to prevent the self-energy balancing of ESS and presents a hybrid SOC estimation algorithm. From the test results of the self-energy balancing phenomenon between aging and normal cells based on the proposed algorithm and BMS, it was confirmed the possibility of self-energy balancing, which is unintentional current flow from cells with a high SOC to cells with a low SOC. In addition, the proposed configuration of the BMS is useful and practical to improve the safety of lithium-ion batteries because the BMS can reliably disconnect a parallel connection of the cells if the self-energy balancing current becomes excessively high.

• Polymer(Korea)
• /
• v.35 no.5
• /
• pp.378-384
• /
• 2011

Silk fibroin is a biocompatible and slowly biodegradable natural polymer. This natural polymer has excellent mechanical properties, non-toxicity, and non-immunogenic properties and has been demonstrated to support tissue regeneration. Also, gelatin is a natural material derived from collagen by hydrolysis and has an almost identical composition as that of collagen. Silk fibroin/gelatin scaffolds have been fabricated by using the freeze-drying method. To establish the scaffold manufacturing condition for silk fibroin and gelatin, we made scaffolds with various compositions of gelatin, glutaldehyde and silk fibroin. The silk fibroin/gelatin scaffolds were characterized using SEM, DSC, and water absorption ability tests. The cellular proliferation was evaluated by WST assay. These results suggested that a scaffold containing 8% of gelatin, 1% of glutaldehyde and 0.3 g of silk fibroin provided suitable characterstics for cell adhesion and proliferation. In conclusion, the silk fibroin/gelatin scaffold may serve as a potential cell delivery vehicle and a structural basis for tissue engineering.

• Journal of the Korean Electrochemical Society
• /
• v.2 no.4
• /
• pp.218-220
• /
• 1999

The performance of the Electric Vehicle and Hybrid Electric Vehicle depends on that of the battery pack composed of series connected batteries. And thermal property is one of the main factors which decide the performance of the battery pack. So heat generation rate from the battery under the various driving mode must be measured as precise as possible because thermal characteristics of the battery affect the driving performance and battery pack's life cycle. Besides, to design and develop the battery thermal management system for the EV and HEV, the measurements of the thermal properties of the batteries are needed. However, the established calorimeter is not adequate to test an EV's battery because its cavity is too small to accommodate the EV's battery. Therefore we developed the calorimeter to test the thermal property of the EV's battery. Its cavity size is 120mm long, 75mm wide and 200mm high. The calorimeter is calibrated by the dummy cell which generates the heat rate from zero to 200W. The measuring accuracy of the calorimeter is within $2\%$ and its voltage stability is 2.5mV in the constant temperature bath.

• The KIPS Transactions:PartD
• /
• v.11D no.6
• /
• pp.1221-1230
• /
• 2004

In mobile environments, the locations of moving objects such as vehicles, airplanes and users of wireless devices continuously change over time. For efficiently processing moving object information, the database system should be able to deal with large volume of data, and manage indexing efficiently. However, previous research on indexing method mainly focused on query performance, and did not pay attention to update operation for moving objects. In this paper, we propose a novel moving object indexing method, named ACAR-Tree. For processing efficiently frequently updating of moving object location information as well as query performance, the proposed method is based on fixed grid structure with auxiliary R-Tree. This hybrid structure is able to overcome the poor update performance of R-Tree which is caused by reorganizing of R-Tree. Also, the proposed method is able to efficiently deal with skewed-. or gaussian distribution of data using auxiliary R-Tree. The experimental results using various data size and distribution of data show that the proposed method has reduced the size of index and improve the update and query performance compared with R-Tree indexing method.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.11
• /
• pp.3-11
• /
• 2015

An advanced receiver which can manage inter-cell interference is required to cope with the explosively increasing mobile data traffic. 3rd Generation Partnership Project (3GPP) has discussed network assisted interference cancellation and suppression (NAICS) to improve signal-to-noise-plus-interference ratio (SINR) and receiver performance by suppression or cancellation of interference signal from inter-cells. In this paper, we propose the advanced receiver based on soft decision to reduce the interference from neighbor cell in LTE-Advanced downlink system. The proposed receiver can suppress and cancel the interference by calculating the unbiased estimation value of interference signal using minimum mean square error (MMSE) or interference rejection combing (IRC) receiver. The interference signal is updated using soft information expressed by log-likelihood ratio (LLR). We perform the system level simulation based on 20MHz bandwidth of 3GPP LTE-Advanced downlink system. Simulation results show that the proposed receiver can improve SINR, throughput, and spectral efficiency of conventional system.

• Clean Technology
• /
• v.20 no.3
• /
• pp.306-313
• /
• 2014

Nanoporous $TiO_2$ films are commonly used as working electrodes in dye-sensitized solar cells (DSSCs). So far, there have been attempts to synthesize films with various $TiO_2$ nanostructures to increase the power-conversion efficiency. In this work, vertically aligned rutile $TiO_2$ nanorods were grown on fluorinated tin oxide (FTO) glass by hydrothermal synthesis, followed by deposition of an anatase $TiO_2$ film. This new method of anatase $TiO_2$ growth avoided the use of a seed layer that is usually required in hydrothermal synthesis of $TiO_2$ electrodes. The dense anatase $TiO_2$ layer was designed to behave as the electron-generating layer, while the less dense rutile nanorods acted as electron-transfer pathwaysto the FTO glass. In order to facilitate the electron transfer, the rutile phase nanorods were treated with a $TiCl_4$ solution so that the nanorods were coated with the anatase $TiO_2$ film after heat treatment. Compared to the electrode consisting of only rutile $TiO_2$, the power-conversion efficiency of the rutile-anatase hybrid $TiO_2$ electrode was found to be much higher. The total thickness of the rutile-anatase hybrid $TiO_2$ structures were around $4.5-5.0{\mu}m$, and the highest power efficiency of the cell assembled with the structured $TiO_2$ electrode was around 3.94%.

• Journal of Life Science
• /
• v.24 no.8
• /
• pp.820-826
• /
• 2014

The localization to specific subcellular sites and the regulation of cell surface receptors and channels are crucial for proper functioning. Postsynaptic density-95/Disks large/Zonula occludens-1 (PDZ)-domain is involved in recognition of and interaction between various proteins, by which the localization and the regulation are mediated. Multi-PDZ domain protein 1 (MUPP1) contains 13 PDZ domains. MUPP1 serves a scaffolding function for structure proteins and signaling proteins, but the mechanism how MUPP1 is stabilized and signalized has not yet been elucidated. We used the yeast two-hybrid system to identify proteins that interact with PDZ domains of MUPP1. We found an interaction between MUPP1 and Parkin. Parkin is an E3 ubiquitin ligase. Loss-of-function mutations of Parkin gene are known to cause an autosomal recessive juvenile parkinsonism. Parkin bound to the $12^{th}$ PDZ domain, but not to other PDZ domains of MUPP1. The C-terminal end of Parkin has a type II PDZ-association motif, which was essential for the interaction with MUPP1 in the yeast two-hybrid assay. When co-expressed in HEK-293T cells, Parkin co-localized with MUPP1. When co-expressed with ubiquitin in HEK-293T cells, MUPP1 has been strongly ubiquitinated by Parkin. These findings collectively suggest that MUPP1 is a novel substrate of Parkin and its function or stability could be modulated by Parkin-mediated ubiquitination.

• Korean Journal of Animal Reproduction
• /
• v.19 no.3
• /
• pp.227-234
• /
• 1995

This study was carried out to investigate the effects according to the time course of glucose exposure on the development of one-cell embryos beyond morula in CR$_laa$ medium. One-cell zygotes from B6CBA F$_1$ mice were recovered at 24 ~ 25h after hCG and cumulus cells were removed with 0.1% hyaluronidase. The embryos were pooled and subsequently divided into each groups and cultured in CR$_laa$ at 37$^{\circ}C$ in 5% CO$_2$ in aIr. The embryos were either, placed in CR$_laa$ containing various concentration (5.5, 16.5, 27.5 and 38.5 mM) of glucose for 1 min. and subsequently returned to the fresh culture medium (without glucose), or were transferred to the same media containing glucose at 72 h post hCG. The results obtained in these experiments were summarized as follows: 1. The development rates of zygotes, recovered from the oviducts in M2 and cultured in CR$_laa$ with 3mg/Im FAF-BSA, to expanded blastocysts (25.7%) and hatching bIastocysts (17.6%) were significantly higher than those of zygotes recovered in TL Hepes (0% and 0%, respectively). 2. The development rates of one-cell embryos exposed to 27.5 mM glucose at 72 h post hCG for 1 min, were 68.8% (CR$_1$+BSA) a and 77.1% (CR$_1$+FBS) of expanded blastocyst stage, but there were no significant differences between the embryos exposed for 1 min. or transferred at 72 h. 3. Regardless of glucose concentration (5.5, 16.5, 27.5 & 38.5mM), 45.7~61.5% of embryos developed to the blastocyst stage. There were no significant differences between any of the treatments on the devel-opment of one-cell embryos. Therefore, the detrimental effect of highly concentration was not appeared.

• 대한생식의학회:학술대회논문집
• /
• 2001.03a
• /
• pp.195-205
• /
• 2001

태반 영양배엽 (trophoblast)은 포유동물의 발생과정 중 가장 먼저 분화되는 세포로서, 자궁환경내에서 배아가 착상, 발생, 및 분화하기 위해서 반드시 필요한 태반을 형성하는 색심적인 세포이다. 영양배엽 세포의 분화과정중의 결함은 배아의 사산이나 임신질환 등의 치명적 결과를 초래한다. 하지만, 영양배엽 세포의 분화를 조절하는 분자생물학적인 메카니즘은 아직 규명되지 않고 있다. 영양배엽 세포의 분화를 조절하는 경로를 규경하기 위한 선결과제는 분화된 영양배엽 세포에서만 발현하는 많은 유전자들이 밝혀져야만 한다. 본 연구팀은 최근에 분화된 영양배엽 세포에서만 발현하는 두 종류의 새로운 유전자들을 찾았다. 한 종류는 homeobox를 보유하고 있는 조절 유전자 Psx이고, 다른 한 종류는 임신호르몬인 태반 프로락틴 라이크 단백질 유전자 PLP-C${\beta}$이다. 본 연구과제의 목표는 이들 유전자의 기능과 조절 메카니즘을 규명함으로써, 영양배엽 세포의 분화를 조절하는 조절경로를 밝히는 것이다. 이를 위하여 다음과 같은 일련의 연구를 수행할 것이다. 1) Psx 유전자가 분화된 영양배엽 세포에서만 발현케 하는 조절 메카니즘을 규명하기 위해 functional assays, in vitro footprinting, gel mobility shift assays, 생쥐형질전화, UV crosslinking, Southwestern blot 등의 방법을 통해 Psx 유전자의 cis-acting 요인과 trans-acting factor를 밝혀 분석한다. 2) 영양배엽 세포의 분화조절 경로를 규명하기 위해 random oligonuclotide library screening, DD-PCR, subtractive screening 등의 방법을 이용하여 Psx 유전자에 의해 조절되는 하부유전자를 밝힌다. 3) Psx 유전자를 knock-out시켜 영양배엽 세포가 발달 및 분화하는데 미치는 역할을 밝힌다. 4) Yeast two-hybrid screening방법을 이용하여 태반 프로락틴 유전자의 수용체를 찾아 이들의 신호전달 기전을 밝힌다. 제1차년 연구결과로서, mouse와 rat으로부터 각각 Psx 유전자의 genomic DNA를 클로닝하여, 유전자 구조를 비교한 결과, mouse Psx (mPsx2)는 4개의 exons으로 이루어져 있는 반면에, rat Psx (Psx3)는 3개의 exons으로 구성되어 있었다. 즉, rPsx3는 mPsx2의 exon1이 없었다. Notrhern blot과 in situ hybridization 분석에 의해 mouse와 rat에서 Psx 유전자가 다르게 발현 조절되는 현상을 밝혔다. 실제로 mPsx2와 rPsx3의 5'-flanking지역을 클로닝하여 염기서열 분석 결과 전혀 homology를 찾을 수 없었다. 또한, 이들 각각 promoter의 activity를 luciferase reporter를 이용하여 조사한 결과 Rcho-1 trophoblast cells에서 각기 다른 activity를 보여 주는 것을 발견하였다. Psx 유전자의 transcription start sites는 Primer extension에 의해 밝혔다. 또한 Psx2 유전자를 knock-out 시키기 위해 targeting vector를 Osdupde1에 제작하였다. 본 과제를 시작할 때 새로운 프로락틴 유전자 하나를 클로닝하여 이 유전자를 PLP-I라고 이름을 붙였다. 이 후 이 유전자 (PLP-I)는 PLP-C${\beta}$라고 이름을 붙이게 되었다. Mouse PLP-C${\beta}$ 유전자의 counterpart를 rat에서 찾아 염기서열을 비교한 결과 mouse와 rat에서 PLP-C${\beta}$유전자의 homology는 약 79% (amino acid level)였다. 본 연구과정을 통해 또 하나의 새로운 PLP-C subfamily member를 mouse로부터 클로닝 하였고, 이 유전자를 PLP-C${\gamma}$라 하였다. PLP-C${\beta}$와 PLP-C${\gamma}$의 발현 유형은 Northern blot과 in 냐셔 hybridization 분석에 의해 태반의 제한된 spongitrophoblast와 trophoblast giant cells에서만 발현하는 것을 밝혔다. 놀랍게도 이들 두 새로운 유전자는 alternative splicing에 의해 두 종류의 isoform이 있음을 밝혔다. PLP family member 유전자로서 splicing에 의한 isoforms을 보여 주는 유전자로는 PLP-C${\beta}$와 PLP-C${\gamma}$가 최초이다. 이들 isoform mRNAs의 발현 유형은 RT-PCR 방법을 이용하여 규명하였다. 또 하나의 새로운 발견은 PLP-C${\beta}$와 PLP-C${\gamma}$가 독특한 유전자 구조를 갖고 있었다. 즉, PLP-C${\beta}$는 exon3의 alternative splicing에 의해 5개 혹은 6개의 exons을 갖는 two isoforms이 생긴다. 반면에 PLP-C${\gamma}$는 exon2가 alternative splcing이 되면서 7개의 exons을 갖거나 6개의 exons을 갖는 isoforms을 만든다. 그리고, PLP-C${\gamma}$의 promoter activity를 trophoblast Rcho-l${\gamma}$ 세포주를 이용하여 PLP-C${\gamma}$ 의 1.5 kb 5'-flanking 지역이 trophoblast-specific promoter activity를 갖고 있음을 밝혔다. PLP-C${\gamma}$ 유전자의 transcription start site는 Primer extension에 의해 밝혔다. 제 1차 년도의 연구결과를 토대로, 2차년에서는 다음단계의 연구를 수행하고자 한다. 즉, 1) mPsx2와 rPsx3의 promoter를 비교분석 함으로서 mouse와 rat에서 Psx 유전자가 다르게 조절되는 메카니즘 규명, 2) Psx와 PLP-C 유전자의 promoter에 있는 cis-acting elements 탐색, 3) Psx2와 Psx3의 단백질을 이용하여 이들이 binding하는 target sequence 규명, 4) 제작한 Psx2 targeting vector를 이용하여 ES cells에서 Psx2 유전자 knock-out, 5) Psx 유전자를 과발현시키는 세포주를 만들고 Psx에 의해 조절되는 유전자 탐색, 6) 새로 밝히 PLP-C members 유전자들의 조절기전을 Rcho-1 세포주를 이용하여 여러 거지 성장인자와 다른 호르몬에 대한 반응을 탐색, 7) Psx와 PLP-C${\gamma}$ 유전자의 chromosomal mapping 등을 밝힐 것이다.