• 한국수소및신에너지학회논문집
• /
• 제19권2호
• /
• pp.118-123
• /
• 2008

For the hydrogen recirculation system of the PEMFC (polymer electrolyte membrane fuel cell), the ejector is useful to improve the efficiency of the fuel cell system. However, conventional ejector does not keep its entrainment ratio good when the various power duties is required by the fuel cell system. In this study, the variable multi-ejector acceptable in the whole duty range required from the fuel cell hybrid mini-bus is developed. Consequently, the performance of the developed ejector is verified by the experiments based on the real operating conditions.

• Journal of Power Electronics
• /
• 제15권6호
• /
• pp.1438-1445
• /
• 2015

A new DC-DC power converter is researched for renewable energy and battery hybrid power supplies systems in this paper. At the charging mode, a renewable energy source provides energy to charge a battery via the proposed converter. The operating principle of the proposed converter is the same as the conventional DC-DC buck converter. At the discharging mode, the battery releases its energy to the DC bus via the proposed converter. The proposed converter is a non-isolated high step-up DC-DC converter. The coupled-inductor technique is used to achieve a high step-up voltage gain by adjusting the turns ratio. Moreover, the leakage-inductor energies of the primary and secondary windings can be recycled. Thus, the conversion efficiency can be improved. Therefore, only one power converter is utilized at the charging or discharging modes. Finally, a prototype circuit is implemented to verify the performance of the proposed converter.

• 한국자동차공학회논문집
• /
• 제8권1호
• /
• pp.72-84
• /
• 2000

To analyze the correlation between drivetrain systems and to optimize the vehicle design with satisfying of the initial design objects, the performance sensitivity analysis through the iterative design procedure must be carried out. In this study, effects of the design parameters for the main components of the parallel type hybrid drivetrain system are analyzed by using the developed method of the vehicle performance simulation, and the basis of the optimal selection of the design parameters from the relation of design constraints and required performances is suggested. In driving control of the parallel hybrid vehicle, power split ratio is the most important factor, and the improved drivetrain system can be constructed through the only change of the algorithm for determination of the power spilt ratio, which is strongly applicable to the driving patterns and the environments. Therefore, Various techniques, such as the change of the weighting factors and the range extended algorithm, are suggested and evaluated in this paper.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.1968-1977
• /
• 2008

A bimodal low-floor tram is designed to provide the flexibility of bus and the punctuality of trains together to the passengers. Its propulsion system is a series hybrid type using a set of CNG engine generator and Li-polymer battery. The present paper describes the specifications of the propulsion system in the bimodal tram which was drawn by a desirable driving cycle. In addition, it shows how the propulsion system of the bimodal tram can be controlled. With using a computer simulation tool of hybrid vehicles, ADVISOR, the performance of the bimodal tram was verified.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.930-939
• /
• 2009

A bimodal tram is being developed to combine the flexibility of a bus with the punctuality of a train. The propulsion system is a series hybrid type using a set of CNG engine generator and Li-polymer battery. This paper presents the experimental results of the series hybrid propulsion power unit using an active loader which can simulate powering and regenerative braking conditions of the propulsion equipments continuously. The power sharing scheme between PWM converter and a battery pack has been observed. The measurement results of DC link voltage and SOC(State Of Charge) of battery pack are presented.

• Journal of Electrical Engineering and Technology
• /
• 제9권2호
• /
• pp.390-398
• /
• 2014

The systematic optimal tuning of power system stabilizers (PSSs) using the dynamic embedded optimization (DEO) technique is described in this paper. A hybrid system model which has the differential-algebraic-impulsive-switched (DAIS) structure is used as a tool for the DEO of PSSs. Two numerical optimization methods, which are the steepest descent and Broyden-Fletcher-Goldfarb-Shanno (BFGS) algorithms, are investigated to implement the DEO using the hybrid system model. As well as the gain and time constant of phase lead compensator, the output limits of PSSs with non-smooth nonlinearities are considered as the parameters to be optimized by the DEO. The simulation results show the effectiveness and robustness of the PSSs tuned by the proposed DEO technique on the IEEE 39 bus New England system to mitigate system damping.

• 전기학회논문지
• /
• 제57권8호
• /
• pp.1334-1341
• /
• 2008

This paper introduces an approach of Hybrid Particle Swarm Optimization(HPSO) for a security-constrained economic dispatch(SCED) with line flow constraints. To reduce a early convergence effect of PSO algorithm, we proposed HPSO algorithm considering a mutation characteristic of Genetic Algorithm(GA). In power system, for considering N-1 line contingency, we have chosen critical line contingency through a process of Screening and Selection based on PI(performance Index). To prove the ability of the proposed HPSO in solving nonlinear optimization problems, SCED problems with nonconvex solution spaces are considered and solved with three different approach(Conventional GA, PSO, HPSO). We have applied to IEEE 118 bus system for verifying a usefulness of the proposed algorithm.

• 한국자동차공학회논문집
• /
• 제9권5호
• /
• pp.105-114
• /
• 2001

In this study, a shift control algorithm far improving the shift quality of a parallel hybrid drivetrain with an automated manual transmission (AM) is proposed. The general AMT requires the sophisticated control of clutch in the clutch engagement to improve its shift characteristics, and that is generally known to be difficult. But in this hybrid drivetrain, we can control the speeds of clutch plates by engine and motor control, and it provides the easier clutch control in shift process than general AMT. Additionally, it permits the much-reduced shift shock. The motor control during the shift period is also to achieve reduced velocity drop of the vehicle in comparison with that of a general AMT. Furthermore various dynamometer-based experiments are carried out to prove the validity of the proposed shift control algorithm.

• 전자공학회논문지 IE
• /
• 제45권3호
• /
• pp.5-12
• /
• 2008

디지털 논리회로의 테스트 데이터와 전력소비를 단축시킬 수 있는 효율적인 테스트 방법을 제안한다. 제안 하는 테스트 방법은 테스트장비내의 테스트 데이터 저장 공간을 줄이는 하이브리드 run-length 인코딩 벙법에 기초하고, 수정된 Bus-invert 코딩 방법과 스캔 셀 설계를 제안하여, 스캔 동작시의 개선된 전력 단축효과를 가져온다. ISCAS'89 벤치마크 회로의 실험결과 고장 검출율의 저하 없이 평균 전력은 96.7%, 피크전력은 84%의 단축을 보이며 테스트 데이터는 기존 방법보다 78.2%의 압축을 갖는다.

• 대한기계학회논문집A
• /
• 제31권4호
• /
• pp.506-516
• /
• 2007

In this paper, a study on low-velocity impact response of four different sandwich panels for the hybrid bodyshell and floor structure application of the Korean low floor bus vehicle was done. Square samples of 100mm sides were subjected low-velocity impact loading using an instrumented testing machine at six energy levels. Impact parameters like maximum force, time to maximum force, deflection at maximum force and absorbed energy were evaluated and compared for four different types of sandwich panels. The impact damage size and depth of the permanent indentation were measured by 3-Dimensional Scanner. Failure modes were studied by sectioning the specimens and observed under optical microscope. The impact test results show that sandwich panel with composite laminate facesheet could not observe damage mode of a permanent visible indentation after impact and has a good impact damage resistance in comparison with sandwich panel with metal aluminum facesheet.