• Current Optics and Photonics
• /
• v.4 no.5
• /
• pp.441-445
• /
• 2020

A novel design for a Fresnel lens for a solar end-pumped laser is demonstrated in this paper. The new hybrid Fresnel lens includes two parts, inner and outer. The inner part is a twice-total-internal-reflection and vertical-transmission lens. The outer part is a once-total-reflection and vertical-transmission lens. The radius of the Fresnel lens is 600 mm, and its focal length is 750 mm. The concentrating performance of the Fresnel lens is examined using TracePro. The results show that the concentration efficiency has been greatly improved. The total concentration efficiency of the hybrid Fresnel lens reaches 73.2% when the radius of the laser rod is 3 mm. This design can simplify the concentration system of a solar end-pumped solid-state laser.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.5A
• /
• pp.305-310
• /
• 2012

This paper proposes a selection combined hybrid sequential deconvolution and single carrier modulation with a zero forcing frequency domain equalizer for single carrier transmission system in order to enhance performance. Selection combining method is an algorithm of antenna space diversities, the receiver can choose the best channel environment only with the increase of the number of antennas, but a baseband structure is the same as the traditional receiver architecture. Simulation results show that the proposed algorithm has a better performance rather than the traditional single carrier transmission with a frequency domain equalizer.

• Journal of Satellite, Information and Communications
• /
• v.9 no.4
• /
• pp.82-86
• /
• 2014

In this paper, we propose a novel modulation scheme specialized in real time broadcast system using a multicopter. Since multicopters have many advantages in aerial photography, they have been widely used in broadcasting technologies. However, because of restrictions on flight time, it is difficult to utilize multicopters in real time broadcasting systems. Therefore, video transmission using multicopter is necessary for low power communication techniques in air channel environment. Performance results of the hybrid modulation in this paper are compared to that of conventional modulations with Bit Error Rate (BER) and Signal to Noise Ratio (SNR) simulations. The results also showed that proposed system is suitable for aerial photography. Experiments demonstrated the superiority of the proposed modulation scheme by showing received symbols through an USRP equipment.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.5
• /
• pp.25-34
• /
• 1997

Relatively slow tuning speed of optical device causes the unwanted delay in high speed single-hop multiwavelength networks. To lessen the overhead, we present a channel access protocol with dynamjic message scheduling. Th eframe structure of proposed protocol adopts hybrid multiaccess scheme in which WDMA is used as a basic multiaccess technique and TDMA is used to provide subchannels within a wavelength band. This architecture has two merits : the network extention is not limited by available number of wavelengths, and the transmission delay caused by optical device tuning time can to minimize the number of tunings. It schedules messages that require same wavelength channels sequencely, so the total transmission delay is reduced by decreasement of wavelength changes. The performance of proposed protocol is evaluated through numerical analysis based on probability and queueing theory. The peformance of proposed protocol is evaluated through numerical analysis based on probability and queueing theory. The numeric results show that the peformance of proposed protocol is better than that of previous one.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.5
• /
• pp.1096-1106
• /
• 2013

This paper presents the control of a Permanent Magnet Electric Variable Transmission (PM-EVT) for Hybrid Electric Vehicles (HEVs). Consisting of two electric machines, the EVT realizes the power split function in an electromagnetic way rather than in a mechanical way. A specific PM-EVT has been designed for Toyota Prius II. The control scheme of the entire vehicle is deduced using the Energetic Macroscopic Representation methodology. The energy management strategy yields local control references. A specific attention is paid for the field weakening for wide speed range. Simulation results are provided to illustrate the EVT modeling and control.

• Journal of the Society of Naval Architects of Korea
• /
• v.42 no.1 s.139
• /
• pp.18-23
• /
• 2005

The transmission and reflection coefficiencies of a BBDB-type floating breakwater in water of finite depth are studied taking account of fluctuating air pressure in the air chamber. The wave potential is calculated by a hybrid integral equation consisting of a Green integral equations associated with the Rankiue Green function inside the BBDB and the Kelvin Green function outside. The transmission and reflection coefficients of the breakwater are obtained directly from the potential solution in the outer region.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.43-44
• /
• 2007

The Underwater Wireless Sensor Network (UWSN) consists of sensor nodes equipped with a small battery of limited energy resource. Hence, the energy efficiency is a key design issue that needs to be addressed in order to improve the lifetime of the network. In this paper, we use a hexagon tessellation with and ideal cell size to deploy the underwater sensor nodes for the UWSN and propose an enhanced hybrid transmission method that considers the load balancing once the data transmission occurs.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.56 no.1
• /
• pp.56-62
• /
• 2007

In this paper, design method for power tower hazard diagnosis/predition system based on UsN was proposed. The proposed method used multi-hybrid sensors to measure rotation, displacement, and inclination state of power tower, and made decision/prediction of hazard of power tower. System design was made with requirement analysis of monitoring for transmission power facility and use of MEMS and optic fiber sensors. For hazard decision, analysis of correlation was made using sensor output. LN based on IEC61850,international standard for digital substation, was also proposed. For transmission facility monitoring, digital substation and power tower were considered as parts of power facility networks.

• Advanced Composite Materials
• /
• v.17 no.1
• /
• pp.25-40
• /
• 2008

The research and development in soundproof materials for preventing noise have attracted great attention due to their social impact. Noise insulation materials are especially important in the field of soundproofing. Since the insulation ability of most materials follows a mass rule, the heavy weight materials like concrete, lead and steel board are mainly used in the current noise insulation materials. To overcome some weak points in these materials, fiber reinforced composite materials with lightweight and other high performance characteristics are now being used. In this paper, innovative insulation sheet materials with carbon and/or glass fabrics and nano-silica hybrid PU resin are developed. The parameters related to sound performance, such as materials and fabric texture in base fabric, hybrid method of resin, size of silica particle and so on, are investigated. At the same time, the wave analysis code (PZFlex) is used to simulate some of experimental results. As a result, it is found that both bundle density and fabric texture in the base fabrics play an important role on the soundproof performance. Compared with the effect of base fabrics, the transmission loss in sheet materials increased more than 10 dB even though the thickness of the sample was only about 0.7 mm. The results show different values of transmission loss factor when the diameters of silica particles in coating materials changed. It is understood that the effect of the soundproof performance is different due to the change of hybrid method and the size of silica particles. Fillers occupying appropriate positions and with optimum size may achieve a better effect in soundproof performance. The effect of the particle content on the soundproof performance is confirmed, but there is a limit for the addition of the fillers. The optimization of silica content for the improvement of the sound insulation effect is important. It is observed that nano-particles will have better effect on the high soundproof performance. The sound insulation effect has been understood through a comparison between the experimental and analytical results. It is confirmed that the time-domain finite wave analysis (PZFlex) is effective for the prediction and design of soundproof performance materials. Both experimental and analytical results indicate that the developed materials have advantages in lightweight, flexibility, other mechanical properties and excellent soundproof performance.

• Journal of Advanced Navigation Technology
• /
• v.11 no.3
• /
• pp.274-280
• /
• 2007

An ultra-wideband signal is characterized by a radiated spectrum with wide bandwidth around a relatively low center frequency. In this paper, the bit error rate (BER), packet error rate (PER), and data throughput performance for an ultra-wideband system with M-ary correlation receiver are analyze in additive white Gaussian noise (AWGN) and co-channel interference channel. To evaluate the performance of UWB system, a set of UWB communication waveform as pulse position modulated (PPM) signals consisting of more than one UWB pulse is used. The M-ary PPM signals are defined to be equally correlated in order to simplify the system performance analysis. The analysis for system performance shows that the wireless channel error significantly degrades throughput performance and can be effectively increased by hybrid ARQ scheme. Also, an attempt for comparing the data throughput of ultra-wideband system on different performance improvement schemes and parameters has been made. From the performance evaluation process, it is shown that the effects of wireless channel and hybrid ARQ scheme for ultra wideband M-ary PPM system can be evaluated by means of a suitable combination of the PER, throughput vs. signal-to-noise power ratio per bit.