• Journal of the Semiconductor & Display Technology
• /
• v.13 no.1
• /
• pp.73-81
• /
• 2014

In this paper, high-speed Hybrid MAC (Medium Access Control layer) implementation suitable for smart grid applications is researched. MB-OFDM (Multi-Band Orthogonal Frequency Division Multiplexing) is considered for high-speed communication method in smart grid application. In this paper, the MAC adopts the distributed network managing method. Also, the MB-OFDM merit of high-speed transfer rate of up to 480Mbps must be supported. Hence, this paper presents an efficient hardware-software integration (co-design) method in order to realize a high- speed transmission, and a realizing method of distribution network. Finally, MAC performance and reliability based on MB-OFDM PHY (PHYsical layer) are confirmed through simulation and emulation.

• ETRI Journal
• /
• v.33 no.5
• /
• pp.759-769
• /
• 2011

Cooperative hybrid-automatic repeat request (HARQ) protocols, which can exploit the spatial and temporal diversities, have been widely studied. The efficiency of cooperative HARQ protocols is higher than that of cooperative protocols because retransmissions are only performed when necessary. We classify cooperative HARQ protocols as three decode-and-forward-based HARQ (DF-HARQ) protocols and two amplified-and-forward-based HARQ (AF-HARQ) protocols. To compare these protocols and obtain the optimum parameters, two unified frameworks are developed for protocol analysis. Using the frameworks, we can evaluate and compare the maximum throughput and outage probabilities according to the SNR, the relay location, and the delay constraint. From the analysis we can see that the maximum achievable throughput of the DF-HARQ protocols can be much greater than that of the AF-HARQ protocols due to the incremental redundancy transmission at the relay.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.4
• /
• pp.164-164
• /
• 2002

This paper proposes a hybrid method for vibration analysis in the medium to high frequency ranges using Power Flow Analysis (PFA) algorithm and Statistical Energy Analysis (SEA) coupling concepts. The main part of the developed method is the application of coupling loss factor (CLF) suggested in SEA to the power transmission, reflection coefficients in PI' A boundary conditions. The developed hybrid method shows very promising results with regard to the applications for the various damping loss factors in wide frequency ranges. And also this paper presents the applied results of Power Flow Finite Element Method (PFFEM) by forming the new joint element matrix with CLF to analyze the various plate structures in shape. The analytical results of automobile, complex plate structures show good agreement with those of PFFEM using the PFA coefficients.

• Journal of Communications and Networks
• /
• v.14 no.5
• /
• pp.510-517
• /
• 2012

This paper analyzes the performance of voice-over-Internet protocol (VoIP) services in terms of the system throughput, the packet delay, and the signaling overhead in a mobile WiMAX system with a hybrid automatic repeat request (HARQ) mechanism. Furthermore, a queueing analytical model is developed with due consideration of adaptive modulation and coding, the signaling overhead, and the retransmissions of erroneous packets. The arrival process is modeled as the sum of the arrival rate at the initial transmission queue and the retransmission queue, respectively. The service rate is calculated by taking the HARQ retransmissions into consideration. This paper also evaluates the performance of VoIP services in a mobile WiMAX system with and without persistent allocation; persistent allocation is a technique used to reduce the signaling overhead for connections with a periodic traffic pattern and a relatively fixed payload. As shown in the simulation results, the HARQ mechanism increases the system throughput as well as the signaling overhead and the packet delay.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.4
• /
• pp.930-937
• /
• 2013

In this paper, a motor control algorithm for performing a mode change without an integrated starter generator (ISG) is suggested for the automatic transmission-based hybrid electric vehicle (HEV). Dynamic models of the HEV powertrains such as engine, motor, and mode clutch are derived for the transient state during the mode change, and the HEV performance simulator is developed. Using the HEV performance bench tester, the characteristics of the mode clutch torque are measured and the motor torque required for the mode clutch synchronization is determined. Based on the dynamic models and the mode clutch torque, a motor torque control algorithm is presented for mode changes, and motor control without the ISG is investigated and compared with the existing ISG control.

• ETRI Journal
• /
• v.44 no.6
• /
• pp.885-902
• /
• 2022

The mmWave cell-free massive MIMO (CFmMIMO), combining the advantages of wide bandwidth in the mmWave frequency band and the high- and uniform-spectral efficiency of CFmMIMO, has recently emerged as one of the enabling technologies for 6G. In this paper, we propose a novel framework for energy-efficient mmWave CFmMIMO systems that uses low-resolution digital-analog converters (DACs) and phase shifters (PSs) to introduce lowcomplexity hybrid precoding. Additionally, we propose a heuristic pilot allocation scheme that makes the best effort to slash some interference from copilot users. The simulation results show that the proposed hybrid precoding and pilot allocation scheme outperforms the existing schemes. Furthermore, we reveal the relationship between the energy and spectral efficiencies for the proposed mmWave CFmMIMO system by modeling the whole network power consumption and observe that the introduction of low-resolution DACs and PSs is effective in increasing the energy efficiency by compromising the spectral efficiency and the network power consumption.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.18 no.7
• /
• pp.2010-2026
• /
• 2024

This work investigates the hybrid precoder scheme in a millimeter wave (mmWave) multi-user MIMO system. We study a sum rate maximization scheme by jointly designing the digital precoder and the analog precoder. To handle the non-convex problem, a block coordinate descent (BCD) method is formulated, where the digital precoder is solved by a bisection search and the analog precoder is addressed by the penalty dual decomposition (PDD) alternately. Then, we extend the proposed algorithm to the sub-connected schemes. Besides, the proposed algorithm enjoys lower computational complexity when compared with other benchmarks. Simulation results verify the performance of the proposed scheme and provide some meaningful insight.

• Membrane and Water Treatment
• /
• v.7 no.3
• /
• pp.209-221
• /
• 2016

As a highly hydrophilic fibrillar mineral in nature, attapulgite (ATP) is a promising new additive for preparation of ultrafiltration (UF) hybrid membrane. In this work, ATP particles, which were grafted with a new Gemini surfactant of Ethyl Stearate-di(octadecyl dimethyl ammonium chloride) to detach the crystal bundles to single crystal and enhance the uniform dispersion in an organic polymer matrix, were incorporated into poly(vinylidene fluoride) (PVDF) matrix, and PVDF/Gemini-ATP hybrid membranes for adsorptive removal of Ni(II) ions from aqueous solution were prepared via a phase inversion method. Chemical composition, crystalization and morphology of the modified ATP were characterized by Fourier transform infrared spectroscopy (FTIR), Transmission electron microscope (TEM) and X-ray diffraction (XRD), respectively. The morphology of the hybrid membrane was characterized by Scanning electron microscopy (SEM), the performance of permeability, hydrophilicity and adsorption of Ni(II) ions were studied, and the adsorption kinetics of the PVDF/ATP hybrid membranes were particular concerned. The results showed that the hybrid membrane displayed a good thermal stability and hydrophilicity. Comparing with PVDF membrane, the hybrid membrane possessed good adsorption capacity for Ni(II) ions, and the adsorption kinetics fit well with Lagergren second-order equation.

• Proceedings of the Optical Society of Korea Conference
• /
• 2004.07a
• /
• pp.18-19
• /
• 2004

• Journal of Electrical Engineering and Technology
• /
• v.12 no.5
• /
• pp.1729-1742
• /
• 2017

In designing System Protection Schemes (SPSs) in power systems, protecting transmission network against extreme undesired conditions becomes a significant challenge in mitigating the transmission line overloading. This paper presents an intelligent Special Protection and Control Scheme (SPCS) using of Differential Evolution with Adaptive Mutation (DEAM) approach to obtain the optimum generation rescheduling to solve the transmission line overloading problem in system contingency conditions. DEAM algorithm employs the attraction-repulsion idea that is applied in the electromagnetism-like algorithm to support the mutation process of the conventional Differential Evolution (DE) algorithm. Different N-1 contingency conditions under base and increase load demand are considered in this paper. Simulation results have been compared with those acquired from Genetic Algorithm (GA) application. Minimum severity index has been considered as the objective function. The final results show that the presented DEAM method offers better performance than GA in terms of faster convergence and less generation fuel cost. IEEE 30-bus test system has been used to prove the effectiveness and robustness of the proposed algorithm.