• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.11a
• /
• pp.509-514
• /
• 2001

The Fibre-optic Bragg grating (FBG) sensor is broadly accepted as a structural health monitoring device for Fibre reinforced plastic (FRP) materials by either embedding into or bonding onto the structures. The accuracy of the strain measured by using the FBG sensor is highly dependent on the bonding characteristics among the bare optical fibre, protective coating, adhesive layer and host material. In general, the signal extracted from the embedded FBG sensor should reflect the straining condition of the host structure. This paper presents a theoretical model to evaluate the differential strains between the bare fibre and host material with different adhesive thickness and modulus of the protective coating of the embedded FBG sensor.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2004.10a
• /
• pp.163-166
• /
• 2004

Epoxy composite reinforced with 3-D braided Glass/Aramid hybrid fabric was fabricated. FBG sensor was embedded along the braid yam in order to monitor the changes of the complicated inner region of the 3-D braid structure. The good linearity between Bragg wavelength and temperature was verified by several preliminary experiments. The strain inside 3-D braided beam was estimated using FBG sensor system, and the result was compared with the calculated value. It was found that FBG sensor system is very useful technique to investigate inside region of complicated structure.

• Convergence Security Journal
• /
• v.5 no.4
• /
• pp.49-58
• /
• 2005

We propose a specific ubiquitous sensor network (USN) architecture as a promising candidate of the future telemedicine model which offers the patient's mobility and more cost-efficient medical care system. This new USN architecture is a kind of cell-based secure sensor network supporting encrypted multi-casting communications and it has a hybrid routing protocol by adapting flat routing to hierarchical routing. For the patient's privacy and the protection of patient's vital information from eavesdropping, we adopt a lightweight PKI-based secure communication protocol with some formal presentation on its core procedure.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.43-44
• /
• 2007

The Underwater Wireless Sensor Network (UWSN) consists of sensor nodes equipped with a small battery of limited energy resource. Hence, the energy efficiency is a key design issue that needs to be addressed in order to improve the lifetime of the network. In this paper, we use a hexagon tessellation with and ideal cell size to deploy the underwater sensor nodes for the UWSN and propose an enhanced hybrid transmission method that considers the load balancing once the data transmission occurs.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.1
• /
• pp.176-179
• /
• 2022

In this paper, we consider a sectorized wireless powered sensor network (WPSN), wherein sensor nodes are clustered based on sectors and transmit data to the cluster head (CH) using energy harvested from a hybrid access point. We construct a system model for this sectorized WPSN and find optimal coordinates of CH that maximize the achievable transmission rate of sensing data. To obtain the optimal CH with low overhead, we perform an asymptotic geometric analysis (GA). Simulation results show that the proposed GA-based CH selection method is close to the optimal performance exhibited by exhaustive search with a low feedback overhead.

• 한국HCI학회:학술대회논문집
• /
• 2009.02a
• /
• pp.552-557
• /
• 2009

In this paper, we propose hybrid navigation system, for obstacle detection and avoidance in Intelligent wheelchairs (IWs). To robustly detect obstacles and avoid them on various environments, hybrid navigation system combines both range-sensor and camera information. For this, 10 range-sensors (2 ultrasonic and 8 infra-red sensors) and CCD camera are used. Through processing the informations obtained from those sensors, our system can detect obstacles with various sizes and shapes, and then avoid them. To assess the effectiveness of the proposed hybrid navigation system, it was tested on complex environments including various obstacles, then the results showed the potential of our system as mobility aids for disabled people.

• Journal of the Semiconductor & Display Technology
• /
• v.20 no.4
• /
• pp.119-124
• /
• 2021

In a situation where Moore's law, which states that the performance of semiconductor integrated circuits doubles every two years, is showing a limit from a certain point, and it is difficult to increase the performance due to the limitations of exposure technology.In this study, a wafer hybrid method that can increase the degree of integration Various research on bonding technology is currently in progress. In this study, in order to achieve rotational precision between wafers in wafer hybrid bonding technology, modeling of θ_z alignment stage and VCM actuator modeling used for rotational alignment, magnetic field analysis and desgin, control, and evaluation are performed. The system of this study was controlled by VCM actuator, capactive sensor, and dspace, and the working range was ±7200 arcsec, and the in-position and resoultion were ±0.01 arcsec. The results of this study confirmed that safety and precise control are possible, and it is expected to be applied to the process to increase the integration.

• Smart Structures and Systems
• /
• v.12 no.3_4
• /
• pp.415-426
• /
• 2013

Condition assessment and monitoring of bridges is critical for safe passenger travel, public transportation, and efficient freight. In monitoring, displacement measurement capability is important to keep track of performance of bridge, in part or as whole. One of the most important parts of a bridge is the expansion joint, which accommodates continuous cyclic thermal expansion of the whole bridge. Though expansion joint is critical for bridge performance, its inspection and monitoring has not been considered significantly because the monitoring requires long-term data using cost intensive equipment. Recently, a wireless smart sensor network (WSSN) has drawn significant attention for transportation infrastructure monitoring because of its merits in low cost, easy installation, and versatile on-board computation capability. In this paper, a rapid wireless displacement monitoring system, wireless hybrid sensor (WHS), has been developed to monitor displacement of expansion joints of bridges. The WHS has been calibrated for both static and dynamic displacement measurement in laboratory environment, and deployed on an in-service highway bridge to demonstrate rapid expansion joint monitoring. The test-bed is a continuous steel girder bridge, the Founders Bridge, in East Hartford, Connecticut. Using the WHS system, the static and dynamic displacement of the expansion joint has been measured. The short-term displacement trend in terms of temperature is calculated. With the WHS system, approximately 6% of the time has been spent for installation, and 94% of time for the measurement showing strong potential of the developed system for rapid displacement monitoring.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.396-399
• /
• 2003

In this paper, the purpose is to develop imaging technique of synchrotron radiation using CMOS image sensor. The detector using hybrid method to be research in this lab was used, in order to increase image signal. We made experiments with 1B2 Whitebeam/microprobe beamline in PAL (Pohang Accelerator Laboratory). Phosphor materials such as ZnS:(Ag,Li), ZnS:(Cu,Al), $Y_2O_2S:Eu$ were produced by spin coating on glass. Synchrotron radiation images were acquired and evaluated from monochromatic light from monochromoator in PAL 1B2line. From obtained object and phantom, MTF was 0.15 in ZnS:(Ag,Li) phosphor, and 0.178 in ZnS:( Cu,Al) at 151p/mm. MTFs were unsystematic because thickness of phosphor and uniformity of surface were not optimized. It's expected to improve MTF and the qualify of images as uniformity's optimized.

• Journal of KIISE:Computer Systems and Theory
• /
• v.36 no.6
• /
• pp.502-510
• /
• 2009

Multiprecision squaring is one of the most significant algorithms in the core public key cryptography operation. The aim of this work is to present a new improved squaring algorithm compared with the MIRACL's multi precision squaring algorithm in which the previous work [1] on multiprecision multiplication is implemented. First, previous works on multiprecision multiplication and standard squaring are analyzed. Then, our new Lazy Doubling squaring algorithm is introduced. In MIRACLE library [3], Scott's Carry-Catcher Hybrid multiplication technique [1] is applied to implementation of multiprecision multiplication and squaring. Experimental results of the Carry-Catcher hybrid squaring algorithm and the proposed Lazy Doubling squaring algorithm both of which are tested on Atmega128 CPU show that proposed idea has achieved significant performance improvements. The proposed Lazy Doubling Squaring algorithm reduces addition instructions by the fact $a_0\;{\ast}\;2\;+\;a_1\;{\ast}\;2\;+\;...\;+\;a_{n-1}\;{\ast}\;2\;+\;a_n\;{\ast}\;2\;=\;(a_0\;+\;a_1\;+\;...\;+\;a_{n-1}\;+\;a_n)\;{\ast}\;2$ while the standard squaring algorithm reduces multiplication instructions by the fact $S_{ij}\;=\;x_i\;{\ast}\;x_j\;=\;S_{ij}$. Experimental results show that the proposed squaring method is 25% faster than that in MIRACL.