• Korean Journal of Optics and Photonics
• /
• v.5 no.2
• /
• pp.304-310
• /
• 1994

The use of thermally expanded core (TEe) fibers fabricated by thermal diffusion of dopants such as $GeO_{2}$ in hybrid fiber components has an advantage of eliminating lenses for collimation and focusing. An electric furnace is fabricated to heat the fibers locally for the core expansion. We observed an expansion of the mode size at $1.3\mu\textrm{m}$ wavelength by 27% after treating a section of single mode optical fiber at $1250^{\circ}C$ for 10 hours. hours.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.28 no.3
• /
• pp.295-305
• /
• 1992

The critical strain energy release rate and the failure mechanisms of glass-carbon epoxy resin hybrid composites are investigated in the temperature range of the ambient temperature to 8$0^{\circ}C$. The direction of laminates and the volume fraction are [(+45, -45, 0, 0) sub(2) ] sub(s), 50%, respectively. The major failure mechanisms of these composites are studied using the scanning electron microscope for the fracture surface. Results are summarized as follows: 1) The critical strain energy release rate shows a maximum at ambient temperature and it tends to decrease as temperature goes up. 2) The critical strain energy release rate increases as the content of glass increases, and especially shows dramatic increase for the high glass fiber content specimens. 3) Major failure mechanisms can be classfied such as localized shear yielding, fiber-matrix debonding, matrix micro-cracking, and fiber pull-out and/or delamination.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.05b
• /
• pp.325-328
• /
• 2005

Fiber Reinforced Polymers are recognized as the alternative materials for solving the problem due to the excellent corrosion-resistant property, light-weight and higher strength than steel. Glass fiber is superior to other fibers from the economical point of view but the mechanical property is not. For this reason, researches to improve the mechanical property of glass fiber reinforced polymer rebar has been conducted and it emerged as a solution to make the bar as a hybrid type with carbon fibers. This paper presents results of experimental program to investigate the scattering effectiveness of carbon fibers in glass FRP bar.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2004.04a
• /
• pp.63-66
• /
• 2004

In this study, a hybrid composite journal bearing composed of carbon fiber reinforced phenolic composite liner and metal backing was manufactured to solve the seizure problem of metallic journal bearing materials because the carbon fiber has self-lubricating ability and the phenolic resin has thermal resistance characteristics. To estimate the wear resistance of carbon fiber phenolic composite, wear tests were performed at several pressures and velocities. The oil absorption characteristics, coefficient of thermal expansion, strength and stiffness of the composite were also tested. Using the measured stiffness values, the thermal residual stresses in the composite were calculated to check the reliability of the composite journal bearing.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.04a
• /
• pp.325-326
• /
• 2003

유기물질과 무기물질의 복합체 제조는 일찍이 1980년대 초부터 연구되어 오고 있고, 새로운 성능 및 기능 확대를 목표로 계속 이루어지고 있다[1-2]. 폴리비닐알코올(Poly(vinyl alcohol), PVA)은 분리막, 투석, 약물전달, 암세포 괴사용 색전제 등 의료 및 산업용 섬유로 널리 사용되고 있는 비닐계 고분자이다[3,4]. 또한 무기화합물인 Hydroxyapatite(HAp)는 칼슘 포스페이트계 세라믹으로, 중금속 흡착성, 항균성, 생체 친화성 등이 우수하여 의료용 소재로 사용되어 오고 있다. (중략)

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10b
• /
• pp.279-280
• /
• 2003

아크릴계 섬유를 포함하여 기존 섬유의 새로운 용도 창출 및 부가가치를 높이기 위하여 특수한 기능성을 나타내는 섬유들에 대한 관심이 꾸준히 증가하고 있다[1]. 이러한 이유로 유기물질과 무기물질의 복합체 제조는 일찍이 1980년대 초부터 연구되고 있고, 새로운 성능 및 기능 화대를 목표로 계속 이루어지고 있다[2]. 폴리아크릴로니트릴(Polyacrylonitrile, PAN)은 용액방사를 하는 대표적인 합성섬유로 담요, 카페트, 커튼 등 다양한 제품으로 응용되고 있으며, 그 성질이 천연섬유인 양모와 유사하기 때문에 양모 대체용으로 많이 사용되고 있다[1]. (중략)

• International Journal of Concrete Structures and Materials
• /
• v.8 no.1
• /
• pp.27-41
• /
• 2014

The use of carbon fibers (CF) and glass fibers (GF) were combined to strengthen concrete flexural members. In this study, data of tensile tests of 94 hybrid carbon-glass FRP sheets and 47 carbon and GF rovings or sheets were thoroughly investigated in terms of tensile behavior. Based on comparisons between the rule of mixtures and test data, positive hybrid effects were identified for various (GF/CF) ratios. Unlike the rule of mixtures, the hybrid sheets with relatively low (GF/CF) ratios also produced pseudo-ductility. From the calibrated results obtained from experiments, a new analytical model for the stress-strain relationship of hybrid FRP sheets was proposed. Finally, the hybrid effects were verified by structural tests of concrete members strengthened with hybrid FRP sheets and either carbon or glass FRP sheets.

• Journal of agriculture & life science
• /
• v.46 no.6
• /
• pp.75-86
• /
• 2012

In this study, eco-friendly hybrid composite boards were manufactured from green tea, 3 kinds of charcoals and wood fiber for developing interior materials to reinforce the strength performances and the functionalities in addition to performances of the hybrid composite boards composed of green tea and wood fiber. The effects for the kind and the component ratio of raw materials on dynamic MOE (modulus of elasticity) were investigated, and static bending strength performances were nondestructively estimated. Dynamic MOEs were highest in the hybrid composite boards composed of green tea, fine charcoal and wood fiber on the whole. However, the difference caused by the kind of charcoals was small. These values decreased with increasing component ratios of green tea and charcoals. The hybrid composite boards using $E_1$ grade urea resin had the higher values than those using $E_0$ grade urea resin, however the difference between them markedly decreased than that of hybrid composite board composed of green tea and wood fiber, and it was found that these values were markedly improved than those of the hybrid composite boards composed of green tea and wood fiber. There were mostly high correlations with significance at 1% level between dynamic MOEs and static bending strength performances, and this means that the static bending strength performances can be estimated from dynamic MOE.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.05a
• /
• pp.155-156
• /
• 2012

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.06a
• /
• pp.793-794
• /
• 2008