• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.33 no.4
• /
• pp.255-263
• /
• 2009

The most concerning issue of these days is the energy crisis caused by increasing threat of dependence on imported oil and volatile market trend. Under these circumstances, the PHEV(plug-in hybrid electric vehicle) is drawing attention for the next generation's car which could give a chance to decrease the dependence on imported oil and reduce the environmental impact of vehicle. The fueling cost of PHEV, one of the core factor of decision about buying car, should be calculated in the circumstances of Korea to make sure that PHEV has competitive power in real market. The fuel cost saving of PHEV versus CV(conventional vehicle) is simulated and discussed in the condition of increasing gasoline cost, electricity rate, and city-gas rate. In conclusion, the PHEV60-FS shows the best economic feasibility when gasoline price goes up. The PHEV20 has the most stable economic feasibility as electricity rate increases. The fuel cell cogeneration system for RPG could be an alternative for charger of PHEV in the near future.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.2
• /
• pp.742-751
• /
• 2018

Electric vehicles (EV) are emerging as the future transportation vehicle reflecting their potential safe environmental advantages. Vehicle to Grid (V2G) system describes the hybrid system in which the EV can communicate with the utility grid and the energy flows with insignificant effect between the utility grid and the EV. The paper presents an optimal power control and energy management strategy for Plug-In Electric Vehicle (PEV) charging stations using Wind-PV-FC-Battery renewable energy sources. The energy management optimization is structured and solved using Multi-Objective Particle Swarm Optimization (MOPSO) to determine and distribute at each time step the charging power among all accessible vehicles. The Model-Based Predictive (MPC) control strategy is used to plan PEV charging energy to increase the utilization of the wind, the FC and solar energy, decrease power taken from the power grid, and fulfil the charging power requirement of all vehicles. Desired features for EV battery chargers such as the near unity power factor with negligible harmonics for the ac source, well-regulated charging current for the battery, maximum output power, high efficiency, and high reliability are fully confirmed by the proposed solution.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.2
• /
• pp.136-145
• /
• 2013

It is very important to determine specifications of components included in the drive-train of vehicles at the initial design stage. In this study, component sizing process and performance analysis for Extended-Range Electric Vehicles (E-REV) are discussed based on the foundation of determined system configuration and performance target. This process shows sizing results of an electric driving motor, a final drive gear ratio and a battery capacity for target performance including All Electric Range (AER) limit. For E-REV driving mode, the constant output power of a Gen-set (Engine+Generator) is analyzed in order to sustain State of Charge (SOC) of the battery system.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.12
• /
• pp.1304-1312
• /
• 2012

According to the successful development of hybrid vehicle, hybridization of construction equipments like excavator, wheel loader, and backhoe etc., is gaining increasing attention. However, hybridization of excavator and commercial vehicle is very different. Therefore a specialized energy management control algorithm for excavator should be developed. In this paper, hybridization of excavators is investigated and a new energy management control algorithm is proposed. Four control parameters, i.e., lower baseline, upper baseline, idling generation speed, and idling generation torque, are newly introduced and a new operating principle using those four control parameters is proposed. The use of Genetic Algorithm for the optimization of the four control parameters from the view point of minimization of fuel consumption for standard excavating operation is suggested. In order to verify the proposed algorithm, dedicated simulation program of hybrid excavator was developed. The proposed algorithm is applied to a specific hydraulic excavator and 20.7% improvement of fuel consumption is achieved.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.534-537
• /
• 2008

하이브리드자동차의 연료소비율 시험 시 초기 SOC 조건에 따른 SOC와 연비 변화 특성을 파악하기 위해 2종의 차종을 선택하여 UDDS 모드주행 실험을 실시하였다. 실험결과 Strong type 자동차는 주행시작 약 550초 경과 후 SOC 52 $\sim$ 54%로 수렴하였다. 또한 일반 시가지 주행조건에서는 SOC를 50$\sim$55 % 범위에서 제어함을 알 수 있으며, 초기 SOC 조건에 따라 연비는 약 79%의 편차가 나타났다. 이는 저속구간에서 순수 전기자동차 구동이 구현됨으로써 SOC 70%에서 큰 연비 상승 효과가 나타나는 것으로 판단 된다. Mild type 자동차는 연비가 초기 SOC 조건에 따라 약 5%의 편차가 나타남을 알 수 있었으며, SOC 변화특성은 배터리 충전상태에 따라 충전량 제어는 이루어지나 가속 시 어시스트만 이루어지는 시스템적 특성상 효율적인 SOC 제어가 이루어지지 않아 연비에는 큰 영향을 주지 않는 것으로 생각된다.

• Proceedings of the KIEE Conference
• /
• 2008.09a
• /
• pp.273-275
• /
• 2008

본 논문에서는 하이브리드자동차(hybrid vehicle)의 고전원 전기장치 및 전기배선 충전부의 인체 접촉에 의한 감전사고의 예방을 위한 전기적 연속성의 측정방법에 대하여 논하였다. 인체 감전 보호를 위한 기본 대책으로 충전부의 기본절연, 충전부 접근에 대한 보호(배리어, 인클로져 등)가 있다. 하이브리드자동차의 전기적 연속성과 관련된 시험방법은 UNECE, ISO, Japan Attachment 등에서 언급하고 있다. 이들 기준에서 전기적 연속성은 $0.1{\Omega}$ 이하를 유지하도록 하고 있다. 본 연구에서는 하이브리드자동차의 전기적 연속성 측정 방법에 있어 외국의 기준과 규격의 내용을 검토하고 전기적 연속성 측정방법을 제시하고자 한다.

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.202-203
• /
• 2011

본 논문에서는 자동차가 전기모터로 주행하다가 배터리가 방전되면 엔진으로 구동할 수 있도록 연결해 주는 클러치 시스템에 적용된 BLDC 모터의 위치제어기를 제안한다. 클러치 시스템에 사용되는 BLDC 모터의 구동은 Hall 센서로부터 검출된 회전자 위치정보를 이용하여 위치제어를 수행하였다. PHEV 시스템에서는 클러치를 엔진과 전기모터로 연결해야 하므로 정확하고 빠른 위치제어를 위해 위치제어기를 적용하였고, 클러치 연결 시 진동을 최소화하기 위해 속도제어기를 사용하여 엔진의 속도와 클러치 모터의 속도를 동기가 되도록 하였다. 또한 위치제어를 하기 전에 클러치의 초기위치를 맞춰 줘야 하므로 모터의 위치정보를 이용하여 속도제어기와 전류제어기로 모터를 일정한 위치로 이동시켰다. BLDC 모터의 전압제어를 위한 PWM 방법은 기존의 바이폴라 PWM 보다 전류리플이 적은 유니폴라 효과를 내는 새로운 바이폴라 PWM 방법을 사용하였다. 제안된 알고리즘은 시뮬레이션과 실험을 통해 검증하였다.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.2
• /
• pp.353-360
• /
• 2016

Series hybrid electric vehicles (SHEVs) having multiple power sources such as an engine- generator (EnGen), a battery, and an ultra-capacitor require a power control unit with high power density and reliable control operation. However, manufacturing using separate individual power converters has the disadvantage of low power density and requires a large number of power and signal cable wires. It is also difficult to implement the optimal power distribution and fault management algorithm because of the communication delay between the units. In order to address these concerns, this approach presents a design methodology and a power control algorithm of an integrated power converter for the SHEVs powered by multiple power sources. In this work, the design methodology of the integrated power control unit (IPCU) is firstly elaborately described, and then efficient and reliable power distribution algorithms are proposed. The design works are verified with product-level and vehicle-level performance experiments on a 10-ton SHEV.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.5
• /
• pp.839-844
• /
• 2008

A novel state of health estimation method for hybrid electric vehicle lithium battery using sliding mode observer has been presented. A simple R-C circuit method has been used for the lithium battery modeling for the reduced calculation time and system resources due to the simple matrix operations. The modeling errors of simple model are compensated by the sliding mode observer. The design methodology for state of health estimation using dual sliding mode observer has been presented in step by step. The structure of the proposed system is simple and easy to implement, but it shows robust control property against modeling errors and temperature variations. The convergence of proposed observer system has been proved by the Lyapunov inequality equation and the performance of system has been verified by the sequence of urban dynamometer driving schedule test. The test results show the proposed observer system has superior tracking performance with reduced calculation time under the real driving environments.

• International Journal of Automotive Technology
• /
• v.7 no.1
• /
• pp.91-99
• /
• 2006

The diesel Auxiliary Power Unit (APU) for vehicle applications is a complex nonlinear system. For the purpose of this paper presents a dynamic average model of the whole system in an entirely physical way, which accounts for the non-ideal behavior of the diode rectifier, the nonlinear phenomena of generator-rectifier set in an elegant way, and also the dynamics of the dc load and diesel engine. Simulation results show the accuracy of the model. Based on the average model, a simple PI control scheme is proposed for the multivariable system, which includes the steps of model linearization, separate PI controller design with robust tuning rules, stability verification of the overall system by considering it as an uncertain one. Finally it is tested on a detailed switching model and good performances are shown for both set-point following and disturbance rejection.