• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.444-444
• /
• 2008

EL은 LCD와 같은 수광 형태의 소자에 비해 응답속도가 빠르고, 자체 발광 형태의 디스플레이로 휘도가 우수하며 구조가 간단하여 제조가 용이하고 경량 박형의 장점을 가지고 있다. EL을 이용하여 세븐 세그먼트나 픽셀별 발광으로 표시소자를 제작하였다. EL 소자의 구조는 전극은 금, 유전체는 PMN과 PZT를 이용하였으며 형광체를 적층하고 ITO를 증착하여 제작하였다. 4*4mm로 크기의 픽셀이 49개가 들어간 소자를 제작하고 ITO와 하부 전극을 교차하여 매트릭스 타입으로 제작하였다. 픽셀 하나에 교류 전압 펄스를 변화하여 가했을 때의 픽셀의 광전특성과 주변 픽셀에 미치는 영향에 대해 오실로스코프, 광 프로브 등을 이용하여 특성을 살펴보았다.

• Transactions on Electrical and Electronic Materials
• /
• v.6 no.3
• /
• pp.101-105
• /
• 2005

Electroluminescence(EL) and current-voltage(I-V) characteristics of hybrid EL devices containing Pr and Mn co-doped ZnS nanoparticles were investigated in this study. For the insertion of a hole transport layer of poly (N-vinyl carbazole)(PVK), the current level became lower due to the accumulation of electrons at the interface between PVK and nanoparticles. When both PVK and buffer layer $BaF_2$ were simultaneously introduced, the enhanced EL efficiency and improved I-V characteristics were obtained. This results from the additional increase of hole injection owing to the internal field induced by the significant accumulation of electrons at the interface. The presence of buffer layer $BaF_2$ together with PVK makes it possible the charge accumulation enough to induce the sufficient internal field for further hole injection.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.spc8
• /
• pp.3045-3050
• /
• 2011

The synthesis of copolymers containing thiophene and benzimidazole unit by Stille polymerization is reported. The polymers with many unsubstituted thiophene units in the backbone have been reported to show low solubility, which has been a problem for spin-coating for the device fabrication. In dihexyl-2H-benzimidazole, the sulfur at 2-position of BT unit was replaced with dialkyl substituted carbon, while keeping the 1,2-quinoid form, to improve the solubility of the polymers. The PL emission spectra of the PHBIT1, PHBIT2 and PHBIT3 in chloroform solutions show maximum peaks at 500~561 nm. In thin films, maximum peaks of the PHBITs appeared at 529, 562 and 569 nm, respectively. The EL emission maxima of the PHBIT1 and PHBIT2 appear at around 588 and 576 nm, respectively. The current density and maximum luminescence of the LED with the configuration of ITO/PEDOT/ PHBIT2/Ca/Al are 552 mA/$cm^2$ and 46 cd/$m^2$, respectively.

• Korean Journal of Optics and Photonics
• /
• v.19 no.3
• /
• pp.187-192
• /
• 2008

The design and analysis of a novel photonic crystal electro-optic modulator are presented in this paper. The device incorporates an electro-optic (EO) polymer slot waveguide into the center of a silicon photonic crystal waveguide. In this device, strong optical confinement in the EO polymer core and small group velocity from the photonic crystal structure provide a surprise enhancement of the EO effect.