• 소성∙가공
• /
• 제16권7호
• /
• pp.549-554
• /
• 2007

The objective of this paper is to investigate into the fabrication technology of cores for the injection mould with three-dimensional conformal cooling channels to reduce the cooling time. The location of the conformal cooling channels has been determined through the injection molding analysis. The mould has been manufactured from a hybrid rapid tooling technology, which is combined a direct metal rapid tooling with a machining process. Several injection molding experiments have been performed to examine the productivity and the validity of the designed mould. From the results of the experiments, it has been shown that the proposed mould can mold a final product within a cooling time of 3 seconds and a cycle time of 21 seconds, respectively.

• Industrial Engineering and Management Systems
• /
• 제13권1호
• /
• pp.15-28
• /
• 2014

Evaluation of the implementation and performance of a firm's green supply chain management (GSCM) is an ongoing process. Balanced scorecard is a multi-criteria evaluation concept that highlights implementation and performance measures. The literature on the framework is abundant literature but scarce on how to build a hierarchical framework under uncertainty with dependence relations. Hence, this study proposes a hybrid approach, which includes applied interpretive structural modeling to build a hierarchical structure and uses the analytic network process to analyze the dependence relations. Additionally, this study applies the fuzzy set theory to determine linguistic preferences. Twenty dependence criteria are evaluated for a GSCM implemented firm in Taiwan. The result shows that the financial aspect and life cycle assessment are the most important performance and weighted criteria.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2003년도 학술발표논문집
• /
• pp.315-318
• /
• 2003

A study was performed to examine the soil environment, vegetation type to the inside slope of sea dike. The soil pH was about 8.5, electric conductivity was $4.59dSm^{-1}$, soil strength was 12.1mm, organic matter was 0.21%. The vascular plants of the inside slope of sea dike were consisted of 101 taxa such as 26 families, 80 genera, 93 species, 8 varieties, 1 hybrid. The life cycle of the plants was annual 38.6%, biennial 14.8%, perennial 46.5%. As it compared with consistency ratio in the flora of korea, the distribution of annual, biennial appeared highly. From this examine, it appears that the environment need soil improvement using water holding materials and organic supplements.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권7호
• /
• pp.1068-1074
• /
• 2009

This paper describes a study for the buoy which should be operated by a stand-alone power system. The field of this study is related to a power system operated by two batteries which depends on the load power. The fluctuation of the voltages makes the life cycle of the battery shorten. The control algorithm has been proposed for reducing the voltage pulsation of the battery by operation strategy according to using purpose such as main or sub power supply system. The power system with battery is separated two parts and this has been proved through a simulation and a sea experiment. In order for the experiment to use a wireless monitoring system has been installed in buoy. This paper shows an excellent test result of wireless monitoring system for buoy.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.1373-1378
• /
• 2009

This study is aiming comparison and analization between efficiency of hybride air conditioning system which uses low temperature water under dam and air and EHP(Electric Heat Pump). The experimental was carried out with air cooling tests for EHP system having 80HP and composition heat pump system. P-i diagram of both systems and COP was used to derive schemetic and calcuations. As results of the tests, hybride system has 1.4 time higher efficiency coefficient.

• 대한산업공학회지
• /
• 제31권3호
• /
• pp.201-209
• /
• 2005

Empty moves are necessary when there are imbalances among transportation demands from source locations to destination locations and the transportation demands require empty equipment that must be supplied to source locations. When the amount of the inflow exceeds that of the outflow or the amount of the outflow exceeds that of the inflow, repositioning empty equipment is necessary. Examples of the empty equipment are containers, chassis, and pallets. This paper addresses how to estimate the empty moves on several typical transportation networks. Types of transportation networks considered are chain, tree, cycle, tree of cycles, and hybrid networks. Simple procedures are suggested for determining the optimal empty flows. Numerical examples are provided to illustrate procedures in this paper.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.936-937
• /
• 2015

본 논문은 페달력과 전기 구동력을 동시에 사용하는 하이브리드 3륜 전기자전거의 구동부에서 보조력의 제어에 토크리플이 억제될 수 있도록 역기전력 함수를 이용한 PAS(Power assist system)을 제안한다. 제안된 방식에서는 하이브리드 3륜 전기자전거의 구동력을 제공하는 BLDC(Brushless DC) 전동기의 역기전력 형상과 토크 사이의 상관관계를 바탕으로, 사용자의 요구 토크에 대하여 추정된 역기전력 역함수를 통해 지령 전류를 발생하고, 지령전류의 제어에는 추정된 역기전력함수를 사용하여 제어 성능을 향상시킨다. 연속적인 역기전력의 추정에는 홀센서의 위치각과 추정속도를 통해 연속적인 위치각을 추정하고, 이를 통해 룩-업 테이블의 실제 역기전력 데이터와 위치 보정값을 사용하게 된다. 하이브리드 3륜 전기자전거의 제안된 PAS 제어 방식은 시뮬레이션을 통해 가능성을 검증하였다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 춘계학술대회논문집 - 한국공작기계학회
• /
• pp.478-483
• /
• 2000

In this study to cope with the decreasing product's life-cycle a virtual simulator to realize the simulation environment similar to a real manufacturing line is developed. The developed simulator plays a role in reducing the product conversion time by alternating manufacturing components and work plans on the simulation as manufacturing lines change and actuating a virtual manufacturing lines change and actuating a virtual manufacturing line before a real production. The developed simulator realized a virtual manufacturing line on the simulation using various manipulators and work cells as manufacturing components. Also It can be shown that the simulator can cope with rapid change of a manufacturing line by developing a interface that a separate process is managed for each manufacturing module and a manipulator component and a work cell are changed for a user to become convenient to teach tasks of each work module. using Microsoft Visual C++ 6.0 and OpenGL of Silicon Graphics for libraries to realize 3-dimensional graphic and constructing a database system, a hybrid type of hierachical and relational model to develop a progra that has efficiency and standardization.

• Journal of Power Electronics
• /
• 제16권5호
• /
• pp.1650-1660
• /
• 2016

This paper proposes a compensator to eliminate the DC bias of inductor current. This method utilizes an average-current sensing technique to detect the DC bias of inductor current. A small signal model of the DC bias compensation loop is derived. It is shown that the DC bias has a one-pole relationship with the duty cycle of the left side leading lag. By considering the pole produced by the dual active bridge (DAB) converter and the pole produced by the average-current sensing module, a one-pole-one-zero digital compensation method is given. By using this method, the DC bias is eliminated, and the stability of the compensation loop is ensured. The performance of the proposed compensator is verified with a 1.2-kW DAB converter prototype.

• 한국통신학회논문지
• /
• 제32권10C호
• /
• pp.942-949
• /
• 2007

In this paper, we propose a new rate-control scheme, called splining, to construct low-rate codes from high-rate codes by splitting rows of the parity-check matrices of LDPC codes, which can construct rate-compatible LDPC codes having good initial transmission performance. Good low-rate codes can be constructed by making the number of distinct check node degrees as small as possible after splitting. The proposed scheme achieves good cycle property, low decoding complexity, and fast convergence speed, especially compared to the puncturing. Especially, rate-compatible repeat accumulate-type LDPC (RA-Type LDPC) code is constructed using splitting, which covers the code rates from 1/3 to 4/5. Through simulation it is shown that this code outperforms other rate-compatible RA-Type LDPC codes for all rates and can be decoded conveniently and efficiently.