• Proceedings of the KIEE Conference
• /
• 2007.11b
• /
• pp.118-120
• /
• 2007

Today power system technology is being converged with communication system technology or information technology (IT). This conversion action affects on two parts vigorously so that IT has become very essential in power industry. But terminologies of two parts are confused and it is necessary that these are standardized to develop the industry mush more because the standardization is the first step of preparation to FTA environments.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.534-535
• /
• 2009

The objective of this research aims preliminary assessments of the proposed plans of offshore wind farm development based on the recently established national offshore wind map and suitability assessment system of offshore wind farm. Incheon Mueodo, Busan Dadaepo-Gadukdo, Sinangun Haeodo have been assessed considering geographic constraints such as water depth, offshore distance, national park, grid connection, and meteorological constraint such as wind power density and wind direction. According to the assessment, Mueodo plan has a weak point in grid connection and several geographic limitations are involved in Haeodo plan while Dadaepo-Gadukdo seems the most possible plan among the review cases. Because of limited assessment in this research, more detail and further consideration are necessary to make a decision of a feasibility project at proposed sites.

• Proceedings of the KSR Conference
• /
• 2003.10b
• /
• pp.531-537
• /
• 2003

Recently, various and new special methods of construction about steel bridges have been tried, and the study about local buckling about this have been performed too. But becuase of various cases, structural analysis is performed to check safety for each step of construction, and this is not efficient and economical method for time and manpower. So, for solution of this problems, general method about checking safety needs to be developed. In this study, in preparation for development about this, we look into elastic buckling characteristics of plates for each case as load, boundary condition, aspect ratio, and so on.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.19 no.2
• /
• pp.272-280
• /
• 2006

Vertigo is a subtype of dizziness in which there is an illusion of movement, most commonly rotation. Acute peripheral vestibulopathy is one of the most common clinical neurologic syndromes at my age with the acute onset of vertigo, nausea, and vomiting lasting for several days and not associated with auditory or neurologic symptoms. Most affected patients gradually improve over one to two weaks, but some develop recurrent episode. We treated two patients suffered from vertigo, nausea & vomiting, nystagmus, headache with herbal medicine, acupuncture, cupping-treatment. After treatment we observed the improvement. Based on this study, it is considered that oriental medical treatment can be applied to the management of vestibular neuronitis.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.101-103
• /
• 2005

This paper designs a CDU(Control Disaply Unit) for commercial high precision INS(Inertial Navigation System). The CDU is designed using GUI(Graphic User Interface) programming running on Windows operating system. Since the designed CDU provides standard functions of the Windows operating systems and has a modular structure, it is easy to modify and extend. The CDU has been interfaced to the H-726 INS, from which it's usefulness can be seen.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.6
• /
• pp.608-611
• /
• 2012

This paper focuses on attitude stabilization performance improvement of the quadrotor flying robot. First, the dynamic model of quadrotor flying robot was estimated through PEM (Prediction Error Method) using experimental input/output data. And attitude stabilization performance was improved by increasing the generation frequency of PWM signal from 50 Hz to 500 Hz. Also, the controller is implemented using a standard PID (Proportional-Integral-Derivative) controller augmented with feedback on angular acceleration, allowed the gains to be significantly increased, yielding higher bandwidth. Improved attitude stabilization performance is verified by experiment.

• International Journal of Precision Engineering and Manufacturing
• /
• v.6 no.3
• /
• pp.3-7
• /
• 2005

This paper presents the experimental results to verify the atomization characteristics and environmental impact of cutting fluid. Even though cutting fluid improves the productivity through the cooling and lubricating effects, environmental impact due to cutting fluid usage is also increased on factory shop floor. Cutting fluid's aerosol via atomization process can generate human health risk such as lung cancer and skin diseases. Experimental results show that the generated fine aerosol of which particle size less than 10 micron appears near working zone under typical operation conditions. The aerosol concentration also exceeds NIOSH regulations. This research can be provided as a basis of environmental impact analysis for environmental consciousness.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.613-617
• /
• 2008

One of the important parts on multimedia era is acoustic ones. With increased demand of smallest multimedia products such as personal digital assistant (PDA) and mobile phones, it is necessary to develop acoustic devices which have higher performance and smaller size. Acoustic parts with various function for hearing impaired persons. This paper introduces a bone conduction vibrator (BCV) for hearing impaired persons to use portable acoustic device without additional devices. For vibration analysis of the BCV, electromagnetic, mechanical and their coupling effects are considered for the analysis. This paper shows that the development of design and analysis technique by finite element method (FEM) of BCV.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.19 no.3 s.31
• /
• pp.193-200
• /
• 2006

Ocular injury is one of the commonest causes of eye diseases, but its patterns and incidences are variable according to the environment. Blunt Ocular Trauma is one of causes of ocular injury. Visual disturbance by Blunt Ocular Trauma is rarely reported and we do not know the exact convalescence and healing method of that. We treated a patient suffered from visual disturbance by blunt ocular trauma with herbal medicine, acupuncture, cupping treatment. We diagnosed as Blood stasis and noxious water disease. We report a case of visual disturbance by blunt ocular trauma after treatments, we observed the improvement. Based on this study, it is considered that oriental medical treatment can be applied to the management of visual disturbance.

• The Journal of Korean Physical Therapy
• /
• v.15 no.4
• /
• pp.488-497
• /
• 2003

The purpose of this study was to compare the muscle onset time of sternocleidomastoid (SCM) and rectus abdominalis (RA) muscle activity during head lift in supine position between cerebral palsy and healthy children. Ten cerebral palsy children and 10 age, sex-matched healthy children were recruited for this study. Muscle activity of the SCM and RA were collected by surface electromyography (MP100SWS). Results demonstrated that the muscle onset time order was not significantly different between cerebral palsy children and healthy children. However, the DMHT and ST between SCM and RA during head lift in supine position were significantly shorter in healthy children than in cerebral palsy children. Further studies are needed to clarify the mechanism of differences in muscle activation patterns during head lift in supine position in cerebral palsy children compared with healthy children.