• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.59-60
• /
• 2013

슈퍼캐패시터(Super Capacitor) 또는 울트라 캐패시터(Ultra Capacitor) 등으로 불리우는 전기 이중층 캐패시터(EDLC, Electric Double Layer Capacitor)는 기존 콘덴서보다 월등한 용량 특성을 가지며, 전극과 전해질의 화학반응을 이용하던 이차전지들과 달리 주로 계면반응을 사용한 축전원리를 이용하여 높은 출력밀도와 충방전 효율, 무제한에 가까운 사이클 특성을 가지고 있다. 또한 전류변화에 안정적이어서 기존의 이차전지와는 달리 보호회로를 생략할 수 있기 때문에 단순한 회로 구성이 가능하고 전극활물질로서 탄소재를 사용하여 환경 친화적인 특성을 가진 차세대 에너지저장장치라고 할 수 있다. 특히 50만 사이클이라는 우수한 수명특성으로 인해 기존의 이차전지가 사용되기 어려운 다양한 분야에 적용이 늘어가고 있는 추세에 있다.

• Journal of the Korean Data and Information Science Society
• /
• v.23 no.2
• /
• pp.393-401
• /
• 2012

This paper deals with the estimations of the least squares support vector regression when the responses are subject to randomly right censoring. The estimation is performed via two steps - the ordinary least squares support vector regression and the least squares support vector regression with censored data. We use the empirical fact that the estimated regression functions subject to randomly right censoring are close to the true regression functions than the observed failure times subject to randomly right censoring. The hyper-parameters of model which affect the performance of the proposed procedure are selected by a generalized cross validation function. Experimental results are then presented which indicate the performance of the proposed procedure.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1891-1893
• /
• 2003

In order to development of diagnosis system for mold transformer, partial discharge measurement technique is recommended the best effective method for the evaluation of insulation condition. However, this technique was not applied to mold transformer yet. The purpose of this paper is to describe the method of partial discharge measurement for mold transformer. As we reviewed on-line test technique, sensor, transducer of pulse signal processing, set-up of test circuit for loading back device and now testing.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2666-2668
• /
• 2003

The most widely employed grounding apparatus in distribution systems is a driven rod. But this method has some difficulties to get a specified ground resistivity in cities or islands. Recently, the new ground apparatus are proposed. This paper describes the research which relates with the system to evaluate the performance of novel grounding apparatus.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.527-528
• /
• 2007

There are some rebate programs for energy efficient appliances, which are lightings, vending machines, ASDs, motors, transformers, pumps, to reduce national energy consumption in Korea. In existing studies, some diffusion models have been applied to the rebate program case. But those studies could not consider various cases in duration, amounts, whether or not, of rebates. Hence, new diffusion models considering the time-variant diffusion status are proposed for high-efficient appliance rebate programs in this paper. The case study shows the application of these model into some high-efficient appliances.

• Journal of Electrical Engineering and Technology
• /
• v.6 no.5
• /
• pp.666-670
• /
• 2011

In this paper, a method for detecting broken rotor bar and stator winding fault in a low voltage squirrel-case induction motor using an air-gap flux variation analysis is proposed to develop a simple and low cost diagnosis technique. To measure the leakage flux in radial direction, a radial flux sensor is designed as a search coil and installed between stator slots. The proposed method is able to identify two kinds of motor faults by calculating load condition of motors and monitoring abnormal signals those are related with motor faults. Experimental results obtained on 7.5kW three-phase squirrel-cage induction motors are discussed to verify the performance of the proposed method.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.5
• /
• pp.23-30
• /
• 2014

This paper presents an on-line diagnosis system for identifying health and faulted conditions in squirrel-cage induction motors using stator current, temperature, and partial discharge signals. The proposed diagnosis system can diagnose induction motor faults such as broken rotor bars, air-gap eccentricities, stator winding insulations, and bearing faults. Experimental results obtained from induction motors show that the proposed system is capable of detecting induction motor faults.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1057-1058
• /
• 2007

This paper proposes an alternative vibration detection method in a squirrel-cage induction motor using flux sensors. The air-gap flux will be changed when mechanical vibration occurs by bearing fault as well as broken rotor bar and air-gap eccentricity. For detecting those flux variations due to vibration, search coils are installed at stator slots. The induction motor with 380 [V], 7.5 [kW], 4 [Poles], 1,760 [rpm] ratings is used. Magnitudes and distortion of the induced voltage from flux sensors are used to discriminate faulted types. As a result, the flux sensor has been proven to be useful for vibration detection. It is compared to the result with vibration sensor as well.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.427-428
• /
• 2007

This paper presents a study for the Korea power system at yearly peak load time in 2007 summer period. The power system become more complex due to the gradual increment of power demand. We analyze various problems in power system operation, by the use of PSS/E(power flow, fault and transient stability study) and VSAT for voltage stability. The results of power system operating plans and countermeasures are described.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.824-825
• /
• 2007

This paper shows that the California Test could be used optimally considering each concern part of DSM programs. Since participants, non-participants, and utilities want to pursuit their own benefits, it is difficult to satisfy spontaneously. Thus, the test result should be reviewed in the view of each concern part. Additionally, a method for finding the point which is mutually agreed by these concern parts is proposed.