• Weed & Turfgrass Science
• /
• v.1 no.4
• /
• pp.1-5
• /
• 2012

A simple monitoring method was designed to evaluate seed bank in a upper soil (0 to 30 cm depth), which was observed for the pattern of vertical distribution of weed in the soil under tillage or no-tillage condition. The field experiment was established at an organic corn field located in Hwacheon in Kangwon-do from 2010 to 2011. Undistributed linear soil samples were taken using non-destructive soil sampler from 0 to 30 cm depth at the tillage or no-tillage soils. Weed seed distribution in the linear soil samples was estimated by counting the number of weed germinated according to the soil depth. Under tillage condition, the weed seeds were more evenly distributed from 0 to 30 cm depth, with being 75% of weed seeds located in 0 to 15 cm depth compared to the no-tillage condition. Soil samples taken by no-tillage condition had 85% of weed seeds within 15 cm of soil depth, with being 93% of weed seeds from 0 to 20 cm depth. The number of weeds or the number of weed species were three times higher for tillage soil compared to no-tillage soil, and the major dominant weed species were observed for annual plants, such as Echinochloa crus-gall, Mollugo pentaphylla, and Digitaria ciliaris.

• Korean Journal of Mineralogy and Petrology
• /
• v.33 no.4
• /
• pp.325-337
• /
• 2020

The Jurassic granitic rocks in the area of Gwangdeoksan located along the boundary between Hwacheon and Cherwon in northern Gyeonggi Massif consist of two-mica granite, garnet-bearing two-mica granite, mica-granite, and porphyritic biotite granite. These granitic rocks are calc-alkaline series and plotted in peraluminious domain in A/CNK vs. A/NK diagram. Petrographical and geochemical data indicate that the porphyritic biotite granite which intruded at the last period originated from distinct parental magma from two-mica granite, garnet-bearing two-mica granite, and mica-granite. On the basis of Rb/Sr vs. Rb/Ba diagram and Al2O3/TiO2 vs. CaO/Na2O, it is inferred the porphyritic biotite granite originated from protolith with less pelitic composition than 3 other granitic rocks. The enriched values of lithophile elements of Cs, Rb, and Ba and negative trough of Nb, P, Ti on spider diagram suggest that the peraluminous Jurassic granitic rocks in Gwangdeoksan area formed in subduction tectonic environment. Whole-rock zircon saturation thermometer indicates that the granitic rocks in the study area were melted at 692-795℃.

• Korean Journal of Ecology and Environment
• /
• v.48 no.4
• /
• pp.253-262
• /
• 2015

The sustainability of Cypripedium japonicum, a rare plant designated by the Korea Forest Service, is threatened due to artificial factors such as habitat loss and climate change etc. and internal factors such as changes in biological properties of the habitat etc. but conservation research has not been performed in South Korea. The objective of this study is to establish the species conservation strategies by analyzing the characteristics of their habitats, including: 1) Population characteristics, and 2) habitat analysis of the vegetation and abiotic environments. From April to September, 2014, population characteristics [density (stems $m^{-2}$), flowering rate (%), and leaf area ($cm^2$)] in Cypripedium japonicum habitats such as Chuncheon (CC), Hwacheon (HC), Muju (MJ), and Gwangyang (GY) and vegetation characteristics (plant sociological research and ordination analysis), and abiotic environments [temperature ($^{\circ}C$), relative humidity (%), transmitted light ($mol{\cdot}m^{-2}{\cdot}d^{-1}$) and canopy openness (%)] were measured. Cypripedium japonicum was mainly distributed at elevation 450 to 990 m and 5 to $30^{\circ}$ slope. Slope direction was shown as 0 to $110^{\circ}$. Habitats temperature (mean $18.94^{\circ}C$) was well matched to seasonal changes. Differences among sites showed greater level according to latitude difference. It showed the highest in habitat, GY located in the South. On the other hand, relative humidity (77.38%) didn't show much difference among sites. The average degree of canopy openness was 18.17%. It showed the highest at HC (22.1%) and the lowest at MJ (16.1%). The average degree of transmitted light was $9.1mol{\cdot}m^{-2}{\cdot}d^{-1}$. It showed the highest at CC ($10.6mol{\cdot}m^{-2}{\cdot}d^{-1}$) and the lowest at GY ($6.87mol{\cdot}m^{-2}{\cdot}d^{-1}$). Chlorophyll content showed average 26.12 SPAD. It showed the highest at MJ (30.64 SPAD value) and the lowest at HC (23.69 SPAD value). Leaf area was average $253.35cm^2$. It showed the highest at CC ($281.51cm^2$) and the lowest at HC ($238.23cm^2$).

• Korean Journal of Environment and Ecology
• /
• v.35 no.2
• /
• pp.154-163
• /
• 2021

This study was carried out to present the habitat distribution status and the habitat distribution prediction of Sophora koreensis, which is the Korean Endemic Plant included in the EN (Endangered) class of the IUCN Red List. The habit distribution survey of Sophora koreensis confirmed 19 habitats in Gangwon Province, including 13 habitats in Yanggu-gun, 3 habitats in Inje-gun, 2 habitats in Chuncheon-si, and 1 habitat in Hongcheon-gun. The northernmost habitat of Sophora koreensis in Korea was in Imdang-ri, Yanggu-gun; the easternmost habitat in Hangye-ri, Inje-gun; the westernmost habitat in Jinae-ri, Chuncheon-si; and the southernmost habitat in Sungdong-ri, Hongcheon-gun. The altitude of the Sophora koreensis habitats ranged from 169 to 711 m, with an average altitude of 375m. The area of the habitats was 8,000-734,000 m², with an average area of 202,789 m². Most habitats were the managed forests, such as thinning and pruning forests. The MaxEnt program analysis for the potential habitat of Sophora koreensis showed the AUC value of 0.9762. The predictive habitat distribution was Yanggu-gun, Inje-gun, Hwacheon-gun, and Chuncheon-si in Gangwon Province. The variables that influence the prediction of the habitat distribution were the annual precipitation, soil carbon content, and maximum monthly temperature. This study confirmed that habitats of Sophora koreensis were mostly found in the ridge area with rich light intensity. They can be used as basic data for the designation of protected areas of Sophora koreensis habitat.

• Korean Journal of Heritage: History & Science
• /
• v.53 no.4
• /
• pp.216-233
• /
• 2020

This study set out to review tomb culture in the Gyeongju region during the Bronze Age, and also examine the patterns of dolmens during their end phase. For these purposes, the study analyzed 18 tomb relics from the Bronze Age and nine from the early Iron Age. Gyeongju belongs to the Geomdan-ri cultural zone. Approximately 120 tombs from the Bronze Age have been excavated in the Gyeongju region. There are fewer tombs than dwellings in the region, which is a general characteristic of the Geomdan-ri cultural zone. Although the number of tombs is small, the detailed structure of the dead body is varied. During the Bronze Age, tombs in the Gyeongju region were characterized by more prolific construction of pit tombs, dolmens with boundaries, and stacked stone altars than were the cases in other areas. There is a great possibility that the pit tombs in the Gyeongju region were influenced by their counterparts in the northeastern parts of North Korea, given the spindle whorl artifacts buried at the Dongsan-ri sites. Dolmens with boundaries and stacked stone altars are usually distributed in the Songguk-ri cultural zone, and it is peculiar that instances of these are found in large numbers in the Gyeongju region as part of the Geomdanri cultural zone. Even in the early Iron Age, the building of dolmens with boundaries and stacked stone altars continued in the Gyeongju region under the influence of the Bronze Age. A new group of people moved into the area, and they crafted ring-rimmed pottery and built wooden coffin tombs. In the early Iron Age, new rituals performed in high places also appeared, and were likely to provide venues for memorial services for heavenly gods in town-center areas. The Hwacheon-ri Mt. 251-1 relic and the Jukdong-ri relic are ruins that exhibit the aspect of rituals performed in high places well. In these rituals performed in high places, a stacked stone altar was built with the same form as the dolmens with boundaries, and a similar rock to the cover stone of a dolmen was used. People continued to build and use dolmens with boundaries and stacked stone altars while sustaining the Bronze Age traditions, even into the early Iron Age, because the authority of dolmens was maintained. Some dolmens with boundaries and stacked stone altars, known as being Bronze Age in origin, would have continued to be used in ritual practices until the early Iron Age. Entering the latter half of the second century B.C., wooden coffin tombs began to propagate. This was the time when the southern provinces, including the Gyeongju region, were included in the East Asian network, with the spread of ironware culture and the arrival of artifacts from central China. Around this time, dolmen culture faded into history with a new era beginning in its place.

• Journal of agriculture & life science
• /
• v.50 no.3
• /
• pp.1-11
• /
• 2016

With increasing interest, there have been studies on LiDAR(Light Detection And Ranging)-based DEM(Digital Elevation Model) to acquire three dimensional topographic information. For producing LiDAR DEM with better accuracy, Filtering process is crucial, where only surface reflected LiDAR points are left to construct DEM while non-surface reflected LiDAR points need to be removed from the raw LiDAR data. In particular, the changes of input values for filtering algorithm-constructing parameters are supposed to produce different products. Therefore, this study is aimed to contribute to better understanding the effects of the changes of the levels of GroundFilter Algrothm's Mean parameter(GFmn) embedded in FUSION software on the accuracy of the LiDAR DEM products, using LiDAR data collected for Hwacheon, Yangju, Gyeongsan and Jangheung watershed experimental area. The effect of GFmn level changes on the products' accuracy is estimated by measuring and comparing the residuals between the elevations at the same locations of a field and different GFmn level-produced LiDAR DEM sample points. In order to test whether there are any differences among the five GFmn levels; 1, 3, 5, 7 and 9, One-way ANOVA is conducted. In result of One-way ANOVA test, it is found that the change in GFmn level significantly affects the accuracy (F-value: 4.915, p<0.01). After finding significance of the GFmn level effect, Tukey HSD test is also conducted as a Post hoc test for grouping levels by the significant differences. In result, GFmn levels are divided into two subsets ('7, 5, 9, 3' vs. '1'). From the observation of the residuals of each individual level, it is possible to say that LiDAR DEM is generated most accurately when GFmn is given as 7. Through this study, the most desirable parameter value can be suggested to produce filtered LiDAR DEM data which can provide the most accurate elevation information.