• Clean Technology
• /
• v.11 no.3
• /
• pp.153-164
• /
• 2005

This study found a reliable evaluation for four kinds of pb-Free plating solutions and it's layers, through pure Sn, SnAg, SnBi and SnCu. These four kind of solutions are widely used to pb-Free plating. Hull-cell, Harring-blum, coverage, throwing power, current efficiency, stability, life-time, composition, hardness, roughness, abrasion, scratch, solderability, corrosion, contact angle, morphology, SIR(Surface insulation resistance) and Whisker test were experimented. Also, Using ICP, XRF, FE-SEM, EDS, temperature/humidity chamber, solderability tester, hardness tester, roughness tester, abrasion tester, salt spray tester, contact angle tester, SIR tester, and microscope. In this paper could be shown the systematic and various analysis for reliability about four kinds of pb-Free plating solutions, processes and it's deposit surface.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1997.10a
• /
• pp.89-94
• /
• 1997

As the reinforced concrete structures are aged, repair and rehabilitation materials and techniques have ben developed. However, most of the repair materials and methods are imported from abroad and theoretical study and repairing techniques are also not well established yet. A specification for quality of repair materials should be established, in order to secure the stability and to improve the serviceability of the repaired structures. In this study, long term properties of repair materials such as thermal expansion coefficient, hardening shrinkage, creep, and chemical resistance have been tested. The material properties shows to be affected many actors such as curing period, temperatures, relative humidity, and etc. The repair material should be selected by considering the cause and shape of the defects, mix properties, workability, quality control of construction, and etc.

• Journal of Korean Society for Atmospheric Environment
• /
• v.10 no.4
• /
• pp.245-251
• /
• 1994

We considered that characteristics of SO$_2$, concentration level and relations of the meteorological parameters and high pollution concentration from the data measured 7 air quality continuous monitoring stations during 4 years, from 1990 to 1993 in Pusan. The SO$_2$ concentration level showed decreasing trend yearly, it was maximum in Winter, minimum in Summer. The time of SO$_2$ peak concentration lagged from seashore to land because of break-down of the nocturnal inversion layer and seabreeze. Ihe correlations of daily SO$_2$, value between various air quality continuous monitoring stations were highest between Beomcheondong and Meongryundong, lowest between Daeyeondong and Sinpyeongdong because of difference of air Pollution emission sources characteristic. The meteorological parameters affecting SO$_2$ concentration level were minimum temperature, relative humidity, wind speed and air pressure. The SO$_2$ high pollution($\geq$95ppb) occurred almost in Winter, particulaly in such day showing lower wind speed and higher air pressure. Elementary SO$_2$ high Pollution Predictor were high pressure system and stability of lower atmosphere.

• Journal of Multimedia Information System
• /
• v.4 no.2
• /
• pp.93-98
• /
• 2017

A new cultivation diary system based on environment sensor data and Web 2.0 with Flex is suggested, to improve the previous system using the subjective data of cultivators. The proposed system is designed by applying an object-oriented model called mini-architecture, in order to enhance the reliability of software as well as promote stability to overall system design. The environment sensor data such as temperature and humidity are used to develop the new reliable diary. Also, an active interface based on Web 2.0 and Android as the user GUI are implemented to maximize the convenience while recording the cultivation diary. The result of the performance evaluation shows that the data from sensors has 99.1% of correlation with that of analogue.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.41 no.3
• /
• pp.261-266
• /
• 1992

In this paper, we investigated the stability of TeS1100-xTGeS1xT( x = 15,33,50 at. %) thin films by observing the transmittance and reflectance changes with annealing and exposure of diode laser(780nm). As results of transmittance changes in constant tenperature and humidity atmosphere, it was shown that TeS150TGeS150T thin film has the smallest transmittance change. From the XRD patterns, it was confirmed that the transmittance changes in TeS150TGeS150T thin film before and after annealing are due to crystalization. The transmittance changes in TeS150TGeS150T thin film with annealing are largest at diode laser wavelength and the trasmittance changes with laser exposure are decreased fast.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.11a
• /
• pp.386-388
• /
• 1996

Low dielectric constant fluorinated oxide (SiOF) films were deposited using SiF$_4$/O$_2$/SiH$_4$mixtures by electron cyclotron resonance chemical vapor deposition (ECR CVD). Chemical composition of SiOF films was investigated by Fourier transform infrared spectroscopy (FT-lR). The fluorine content in the SiOF film observed by X-ray photoelectron spectroscopy (XPS). The dielectric constant decreased with increasing of the SiF$_4$ flow rate about 8sccm. The SiOF film, deposited with SiF$_4$=8 sccm, exhibited a F content of 5 atomic % and a relative dielectric constant 3.45. For evaluating SiOF films stability, humidity tests were performed.

• Membrane Journal
• /
• v.17 no.4
• /
• pp.369-374
• /
• 2007

Polyacrylonitrile diagnostic membranes were prepared to measure blood glucose level of diabetics. Final absorbances at 680 nm through activated polyacrylonitrile membranes were measured at various concentration of glucose in plasma. The end-point results of K/S values obtained from the absorbances had a linear relationship toward the glucose concentration. The effect of temperature on the measurements of glucose concentration was studied. The stability of polyacrlonitrile diagnostic membranes was examined at RH 80%.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.05a
• /
• pp.423-426
• /
• 2005

Steel reinforced concrete (SRC) columns, which are widely employed in high-rise buildings, exhibit particular time-dependent behavior due to creep and shrinkage of the concrete, and this behavior may cause problems related to serviceability and structural stability. SRC columns also exhibit a time-dependent, cross-sectional relative humidity distribution that differs from reinforced concrete (RC) columns, due to the presence of an inner steel plate, which interferes with the moisture diffusion of concrete. This differential moisture distribution of SRC columns may reduce the drying shrinkage and the drying creep as contrasted with RC columns. Therefore, we propose that the differential moisture distribution be taken into account to accurately predict SRC column shortening.

• Proceedings of the Optical Society of Korea Conference
• /
• 2008.07a
• /
• pp.265-266
• /
• 2008

The environmental and mechanical reliability of planar lightwave circuit (PLC)-type optical splitter modules is investigated with references [1, 3]. The module is composed of Y-branching silica-based waveguides on Si connected to optical fiber with UV-curable adhesives and is packaged in a metal case which is filled with humidity-resistant resin. High optical performance such as low loss, low reflection, and thermal stability are obtained through the use of this fiber connection technique. Ten reliability tests including long-term environmental and mechanical and ALT test were carried out for more then ten $1{\times}32$ channel PLC splitter modules.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.8
• /
• pp.1342-1348
• /
• 2008

One important objective of the electricity market is to decrease the price by ensuring stability in the market operation. Interconnected to this is another objective; namely, to realize sustainable consumption of electricity by equitably distributing the effects and benefits of participating in the market among all participants of the industry. One method that can help achieve these objectives is the ^{(R)}$demand-response program, - which allows for active adjustment of the loadage from the demand side in response to the price. The demand-response program requires a customer baseline load (CBL), a criterion of calculating the success of decreases in demand. This study was conducted in order to calculate undistorted CBL by analyzing the correlations between such external or seasonal factors as temperature, humidity, and discomfort indices and the amounts of electricity consumed. The method and findings of this study are accordingly explicated.