• Journal of the Korean Society of Clothing and Textiles
• /
• v.47 no.1
• /
• pp.85-109
• /
• 2023

Laundry has traditionally been regarded as one of the most demanding household chores, but the introduction of smart washing machines is changing this perception. Although smart washing machines have been on the market for several years and consumers' perceptions of washing machines have changed, little is known about consumers' perceptions of smart washing machines. The purpose of this study is to determine what users expect from smart washing machines. We conducted two focus group interviews with sixteen participants who had used smart home appliances to acquire qualitative data. Stimuli created by the interviewees were applied in the focus group interviews to collect more insightful data. We analyzed the data using the three-step method and QSR NVivo. Analysis revealed ten categories of predictive expectations, including seven utilitarian attributes (i.e., smart functionality, smart user interface, reliability, controllability, interactivity, functional value, and economic value) and three hedonic attributes (i.e., fashionable value, psychological value, and social value). The results of this study have implications for the development of smart washing machines that would satisfy consumers by taking user expectations into account.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2021.11a
• /
• pp.280-283
• /
• 2021

SME(small and medium sized enterprise) 환경의 스마트공장 환경에서는 실제 제조라인에서 동작하는 센서(Sensor) 및 액추에이터(Actuator)와 이를 관리하는 PLC(Programmable Logic Controller), 더불어 그러한 PLC를 제어 및 관리하는 HMI(Human-Machine Interface), 그리고 다시 PLC와 HMI를 관리하는 OT(Operational Technology)서버로 구성되어 있으며, 제어자동화를 담당하는 PLC 및 HMI는 공장운영을 위한 응용시스템인 OT서버 및 현장 자동화를 위한 로봇, 생산설비와의 직접적인 연결을 수행하고 있어서 스마트공장 환경에서 보안 기술의 개발이 중점적으로 필요한 영역이다. 이러한 SME 환경의 스마트공장 보안 내재화를 이루기 위해서는, 스마트공장 SW 및 HW 개발 단계에서 IEC 62443-4-1 Secure Product Development Lifecycle에 따른 프로세스 정립 및 IEC 62443-4-2 Component 보안 요구사항과 IEC 62443-3-3 System 보안 요구사항에 적합한 개발 방법론의 도입이 필요하다.

• Korean Journal of Cognitive Science
• /
• v.21 no.2
• /
• pp.309-338
• /
• 2010

In this paper, we studied the brain-computer interface (BCI). BCIs help severely disabled people to control external devices by analyzing their brain signals evoked from motor imageries. The findings in the field of neurophysiology revealed that the power of $\beta$(14-26 Hz) and $\mu$(8-12 Hz) rhythms decreases or increases in synchrony of the underlying neuronal populations in the sensorymotor cortex when people imagine the movement of their body parts. These are called Event-Related Desynchronization / Synchronization (ERD/ERS), respectively. We implemented a BCI-based mouse interface system which enabled subjects to control a computer mouse cursor into four different directions (e.g., up, down, left, and right) by analyzing brain signal patterns online. Tongue, foot, left-hand, and right-hand motor imageries were utilized to stimulate a human brain. We used a non-invasive EEG which records brain's spontaneous electrical activity over a short period of time by placing electrodes on the scalp. Because of the nature of the EEG signals, i.e., low amplitude and vulnerability to artifacts and noise, it is hard to analyze and classify brain signals measured by EEG directly. In order to overcome these obstacles, we applied statistical machine-learning techniques. We could achieve high performance in the classification of four motor imageries by employing Common Spatial Pattern (CSP) and Linear Discriminant Analysis (LDA) which transformed input EEG signals into a new coordinate system making the variances among different motor imagery signals maximized for easy classification. From the inspection of the topographies of the results, we could also confirm ERD/ERS appeared at different brain areas for different motor imageries showing the correspondence with the anatomical and neurophysiological knowledge.

• Journal of KIISE:Software and Applications
• /
• v.31 no.4
• /
• pp.447-456
• /
• 2004

Information extraction is a process of recognizing and fetching particular information fragments from a document. In order to extract information uniformly from many heterogeneous information sources, it is necessary to produce information extraction rules called a wrapper for each source. Previous methods of information extraction can be categorized into manual wrapper generation and automatic wrapper generation. In the manual method, since the wrapper is manually generated by a human expert who analyzes documents and writes rules, the precision of the wrapper is very high whereas it reveals problems in scalability and efficiency In the automatic method, the agent program analyzes a set of example documents and produces a wrapper through learning. Although it is very scalable, this method has difficulty in generating correct rules per se, and also the generated rules are sometimes unreliable. This paper tries to combine both manual and automatic methods by proposing a new method of learning information extraction rules. We adopt the scheme of supervised learning in which a user-interface agent is designed to get information from the user regarding what to extract from a document, and eventually XML-based information extraction rules are generated through learning according to these inputs. The interface agent is used not only to generate new extraction rules but also to modify and extend existing ones to enhance the precision and the recall measures of the extraction system. We have done a series of experiments to test the system, and the results are very promising. We hope that our system can be applied to practical systems such as information-mediator agents.

• Journal of Biomedical Engineering Research
• /
• v.35 no.3
• /
• pp.50-54
• /
• 2014

It is being tried to control robot arm using brain signal in the field of brain-machine interface (BMI). This study is focused on applying guidance laws for efficient robot arm control using 3D coordinates obtained from Magnetoencephalography (MEG) signal which represents movement of upper limb. The 3D coordinates obtained from brain signal is inappropriate to be used directly because of the spatial difference between human upper limb and robot arm's end-effector. The spatial difference makes the robot arm to be controlled from a third-person point of view with assist of visual feedback. To resolve this inconvenience, guidance laws which are frequently used for tactical ballistic missile are applied. It could be applied for the users to control robot arm from a first-person point of view which is expected to be more comfortable. The algorithm which enables robot arm to trace MEG signal is provided in this study. The algorithm is simulated and applied to 6-DOF robot arm for verification. The result was satisfactory and demonstrated a possibility in decreasing the training period and increasing the rate of success for certain tasks such as gripping object.

• Restorative Dentistry and Endodontics
• /
• v.24 no.2
• /
• pp.381-391
• /
• 1999

A new 5th generation adhesive system(ONE-STEP) has been supplied which operators can apply to conditioned tooth surfaces by one simplified step. The purpose of this study was to determine whether different methods of adhesive application and various air drying duration after applying adhesive affect the shear bond strength of composite resin to dentin, and to evaluate the adhesive pattern of composite resin and dentin under SEM. Seventy-seven extracted human molar teeth were cleaned and mounted in palstic test tubes. The occlusal dentin surfaces were exposed with Diamond Wheel Saw and smoothed with Lapping and Polishing Machine (South Bay Technology Co., U.S.A.). Teeth were randomly divided into 7 groups (n=11), In experimental A group, adhesive was applied to dentin with agitation for 20 sec. In experimental N-A group, adhesive were continuously applied to dentin for 20 sec. Also control and experimental 1, 2, 3, 4 groups were dried for 10, 0, 5, 20, 30 seconds after applying adhesive, respectively, Adhesives were light cured for 10 sec. A gelatin capsule 5mm in diameter was filled with Aelitefil$^{TM}$ composite resin, placed on the treated dentin surface and light cured for 40 see, from three sides, All specimens were stored in distilled water at room temperature for 24 hours. The shear bond strengths were measured using a universal testing machine(AGS-1000 4D, Japan) at a crosshead speed of 5mm/min. An one-way ANOVA and LSD test were used for statistical analysis of the data. For SEM evaluation, seven specimens were made and sectioned. Representive postfracture and seven specimens were mounted on brass stubs, sputter-coated with gold and observed under SEM. The results were as follows : 1. The shear bond strength of experimental A group which adhesive were applied to dentin with agitation was higher than that of experimental N-A group (continuous application), and there was significant difference between two groups (p<0.01). 2. The interface between composite and dentin according to different application methods showed close adaptation in experimental A group and showed tinny gap in experimental N-A group. 3. The shear bond strength accoding to various air drying duration was the lowest value(7.57${\pm}$2.60 MPa) in experimental 1 group, so there was significant difference between experimental 1 group and other four groups (p<0.05). But there was no significant difference of shear bond strength between four groups (p>0.05). 4. The interface between composite and dentin according to various air drying duration showed close adaptation in control group and tinny gap in experimental 3 and 4 groups. But experimental 1 and 2 groups showed $30{\mu}$ and 6 - $10{\mu}m$ thick gaps, respectively.

• Restorative Dentistry and Endodontics
• /
• v.35 no.6
• /
• pp.479-485
• /
• 2010

Objectives: The aim of this study was to compare the push-out bond strengths of resin cement/fiber post systems to post space dentin using different application methods of resin cement. Materials and Methods: Thirty extracted human premolars were selected and randomly divided into 3 groups according to the technique used to place the cement into root canal: using lentulo-spiral instrument (group Lentulo), applying the cement onto the post surface (group Direct), and injecting the material using a specific elongation tip (group Elongation tip). After shaping and filling of the root canal, post space was drilled using Rely-X post drill. Rely-X fiber post was seated using Rely-X Unicem and resin cement was light polymerized. The root specimens were embedded in an acrylic resin and the specimens were sectioned perpendicularly to the long axis using a low-speed saw. Three slices per each root containing cross-sections of coronal, middle and apical part of the bonded fiber posts were obtained by sectioning. The push-out bond strength was measured using Universal Testing Machine. Specimens after bond failure were examined using operating microscope to evaluate the failure modes. Results: Push-out bond strengths were statistically influenced by the root regions. Group using the elongation tip showed significantly higher bond strength than other ways. Most failures occurred at the cement/dentin interface or in a mixed mode. Conclusions: The use of an elongation tip seems to reduce the number of imperfections within the selfadhesive cement interface compared to the techniques such as direct applying with the post and lentulospiral technique.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.17 no.2
• /
• pp.26-33
• /
• 2009

New equipment that is useful for driving is developing every day. Navigation is one of the most popular equipment among them. Telematics market including navigation is getting bigger and bigger. However, traffic accident from using telematics equipment is also increasing. Drivers may lose glance using navigation, and driver's workload will also grow by driver's distraction. This thesis is base on the study about the influence on the drivers' workload by using the telematics equipment. Previous study of drivers' workload used psychological method and behavior test method, but it was less connection with telematics equipment. The main object of this thesis is measuring the workload according to the telematics usage by HMI (Human Machine Interface) in the virtual reality. Therefore, we developed GPS simulator, and made an experiment of whether using the navigation or not on the highway and an experiment of the location of navigation in downtown. The result of these experiments is that workload when driver used navigation was higher than when driver didn't use navigation. In addition, workload was different according to the location, and HUD (Head-Up Display) was especially higher than other locations but also its information delivery ability was the best.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1121-1125
• /
• 2004

The RT(Robot Technology) has been developed as the next generation of a future technology. According to the 2002 technical report from Mitsubishi R&D center, IT(Information Technology) and RT(Robotic Technology) fusion system will grow five times larger than the current IT market at the year 2015. Moreover, a recent IEEE report predicts that most people will have a robot in the next ten years. RCP(Robotic Cellular Phone), CP(Cellular Phone) having personal robot services, will be an intermediate hi-tech personal machine between one CP a person and one robot a person generations. RCP infra consists of $RCP^{Mobility}$, $RCP^{Interaction}$, $RCP^{Integration}$ technologies. For $RCP^{Mobility}$, human-friendly motion automation and personal service with walking and arming ability are developed. $RCP^{Interaction}$ ability is achieved by modeling an emotion-generating engine and $RCP^{Integration}$ that recognizes environmental and self conditions is developed. By joining intelligent algorithms and CP communication network with the three base modules, a RCP system is constructed. Especially, the RCP interaction system is really focused in this paper. The $RCP^{interaction}$(Robotic Cellular Phone for Interaction) is to be developed as an emotional model CP as shown in figure 1. $RCP^{interaction}$ refers to the sensitivity expression and the link technology of communication of the CP. It is interface technology between human and CP through various emotional models. The interactive emotion functions are designed through differing patterns of vibrator beat frequencies and a feeling system created by a smell injection switching control. As the music influences a person, one can feel a variety of emotion from the vibrator's beats, by converting musical chord frequencies into vibrator beat frequencies. So, this paper presents the definition, the basic theory and experiment results of the RCP interaction system. We confirm a good performance of the RCP interaction system through the experiment results.

• Journal of Satellite, Information and Communications
• /
• v.9 no.1
• /
• pp.57-64
• /
• 2014

Recently, many human-friendly communication methods have been studied for human-machine interface(HMI) without using any physical devices. One of them is the vision-based gesture recognition that this paper deals with. In this paper, we define some gestures for interaction with objects in a predefined virtual world, and propose an efficient method to recognize them. For preprocessing, we detect and track the both hands, and extract their silhouettes from the low-resolution hand images captured by a webcam. We modeled skin color by two Gaussian distributions in RGB color space and use blob-matching method to detect and track the hands. Applying the foodfill algorithm we extracted hand silhouettes and recognize the hand shapes of Thumb-Up, Palm and Cross by detecting and analyzing their modes. Then, with analyzing the context of hand movement, we recognized five predefined one-hand or both-hand gestures. Assuming that one main user shows up for accurate hand detection, the proposed gesture recognition method has been proved its efficiency and accuracy in many real-time demos.