• Journal of Haehwa Medicine
• /
• v.14 no.1
• /
• pp.141-147
• /
• 2005

The most fundamental and important medical treatment is science of acupuncture and moxibution, which is based on twelve channels theory. Meridian is a pathway that conveys material and energy in a human body. Twelve channels are divided into channels of hand & foot, channels of yin & yang. Yang channels are divided into taiyang, yangming, shaoyang, yin channels are divided into taiyin, shaoyin, jueyin. These are referred to twelve channels, and this theory is being used for diagnosis and test in oriental medicine. Meridian-doin-tajiquan is born, combining taijiquan which is recently handed down from China and Korean traditional method for health protection and treatment in ancient times and twelve channels, three yin & yang theory. I report this because meridian-doin-tajiquan which is non-medical and non-invasive way can be used in the treatment of disease, just like three yin & yang theory, the heart of the meridian theory, and Gehapchu theory are adjusted in the clinical science of acupuncture and moxibution. And I report this because I could mater the appropriateness of the traditional theory and I believed this corresponded with it, training myself by meridian-din-tajiquan. It is considered that this will be used in the treatment of pain disease of muscles and joints system and the diabetes, hypertension, obesity caused by stress in the near future.

• Journal of the Korea Computer Graphics Society
• /
• v.21 no.5
• /
• pp.29-36
• /
• 2015

Human fingers are essential parts of the body that perform complex and detailed motion. Expression of natural finger motion is one of the most important issues in character animation research. Especially, keyboard typing animation is hard to create through the existing animation pipeline because the keyboard typing typically requires a high level of dexterous motion that involves the movement of various joints in a natural way. In this paper, we suggest a method for the generation of realistic keyboard typing motion based on physics simulation. To generate typing motion properly using physics-based simulation, the hand and the keyboard models should be positioned in an allowed range of simulation space, and the typing has to occur at a precise key location according to the input signal. Based on the observation, we incorporate natural tendency that accompanies actual keyboard typing. For example, we found out that the positions of the hands and fingers always assume the default pose, and the idle fingers tend to minimize their motion. We handle these various constraints in one solver to achieve the results of real-time natural keyboard typing simulation. These results can be employed in various animation and virtual reality applications.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.4
• /
• pp.293-300
• /
• 2016

The Voice recognition is one of convenient methods to communicate between human and robots. This study proposes a speech recognition method using speech recognizers based on Hidden Markov Model (HMM) with a combination of techniques to enhance a biped robot control. In the past, Artificial Neural Networks (ANN) and Dynamic Time Wrapping (DTW) were used, however, currently they are less commonly applied to speech recognition systems. This Research confirms that the HMM, an accepted high-performance technique, can be successfully employed to model speech signals. High recognition accuracy can be obtained by using HMMs. Apart from speech modeling techniques, multiple feature extraction methods have been studied to find speech stresses caused by emotions and the environment to improve speech recognition rates. The procedure consisted of 2 parts: one is recognizing robot commands using multiple HMM recognizers, and the other is sending recognized commands to control a robot. In this paper, a practical voice recognition system which can recognize a lot of task commands is proposed. The proposed system consists of a general purpose microprocessor and a useful voice recognition processor which can recognize a limited number of voice patterns. By simulation and experiment, it was illustrated the reliability of voice recognition rates for application of the manufacturing process.

• Fashion & Textile Research Journal
• /
• v.21 no.3
• /
• pp.267-276
• /
• 2019

This study develops 3D-printed-garment collections for a fashion show presentation. A design concept using traditional patterns that consisted of garments regarding the limitation of the printing technology was investigated in order to develop the collection. The structures of the connecting joints of the textile parts which could be easily and sturdily interconnected were invented. Wearability as garments that could be naturally worn on the human body were sought. As a result, four 3D-printed-garments were developed. The 1st garment composed of objects based on a 'Yeon-Dang-Cho'-pattern was constructed as a geometric robe style using a FDM 3D printer and transparent TPU filaments. The 2nd and 3rd 3D-printed-garments composed of an object based on a 'Boe-Sang-Hwa'-pattern was constructed as a distorted one-piece exaggerating the silhouettes of shoulders and waist parts as well as a straight asymmetric tunic style that used the same printer and material as the 1st garment. The last garment composed of an object based on a 'Boe-Sang-Hwa'-pattern printed using a SLA 3D printer and flexible-liquid-resin was constructed attaching the objects on the fabric material by the hot-press machine. The four developed garments were presented in the opening fashion show of 'the 6th International 3D-printing Korea Expo'. This study provides a basic case for related studies to adapt 3D-printing technology in textile pattern development of garment construction.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.1
• /
• pp.28-36
• /
• 2020

In shipbuilding industry, there is conducting most of works by welding at the shipyard, and the volume of welding is increasing with international trends of green ships. Welding joint is guaranteed quality through non-destructive testing (NDT). The manual welding inspection report is produced by identifying the drawings designed, which results in losses the many workforce and occurs human errors. To solve these problems, this paper covers a system that reports on inspection information is automatically generation by input data based on shipbuilding-specific CAD. The developed system analyzes the shape data from drawings of modeling. Also, the system determines welding joints through expansion of the part boundary and generates tag numbers. In addition, it provides the function to automatically extract the information needed for inspection such as weld length, thickness and etc. We conducted test to verify the usefulness of the developed system and confirmed that the welding inspection information extracted through system matches the information shown in drawings of modeling.

• Archives of Orthopedic and Sports Physical Therapy
• /
• v.14 no.2
• /
• pp.1-8
• /
• 2018

Purpose: This study investigated the effect of the augmented reality (AR)-based knee joint short period exercise program and used a motion analyzer with a 3D camera to determine the range of motion and dynamic balance and further investigate the effects of therapeutic exercise on patients. Methods: This study used AR-based motion analysis and a Y-balance test to measure the range of motion (ROM) of each joint: the hip joint and the knee joint. After the measurements, an exercise program was applied to the subjects, using the knee motion program function, and the muscles of the quadriceps femoris and the hamstring were stretched or strengthened. Results: Our results showed knee joint extension at the dominant hip joint flexion position. While there was no significant difference (p>.05) at this position, there were significant differences in the non-dominant hips, unbalanced knee joint flexion, and superior knee joint flexion (p<.05). The Y-balance test using the non-dominant leg supported by the dominant legs showed that the absolute reach was $69.70{\pm}7.06cm$ before the exercise, and the absolute reach after the exercise was $77.56{\pm}6.09cm$ (p<.05). Conclusions: There was a significant difference when the movement of the lower limbs supported the superior limbs, and a significant difference was found in the ROM when the non-dominant side supported the dominant side. Therefore, the AR-based exercise program improves the balance of the human body and the range of motion of the joints, and research that aims to improve patients abilities should continue.

• Journal of The Geomorphological Association of Korea
• /
• v.19 no.3
• /
• pp.123-134
• /
• 2012

This work is to describe the geomorphological landscapes of of Dongcheon-gugok in Korea, and attempts to develop a basic data for traditional natural heritage. Dongcheon-gugok is a union of natural lanscape and human mind-activity. Therefore the study of natural landscape, which consists of geomorphological landscapes, provides a basic data for the use and conservation of traditional natural heritage. Dongcheon-gugok in Korea is almost distributed in the valley of mountainous areas of Taeback and Soback Mountain Ranges. The bedrocks of the areas of Dongcheon-gugok are almost granitic rocks and sedimentary rocks. The landscapes of Dongcheon-gugok is characterized by narrow meandering valley, so Gugok means nine-bended river. The elements of the geomorphological features is a broad flat rock with sheeting joints, joint-block seperated large blocks or tor, steep slope and rocky cliffs, pool, ripple, large or small scale waterfall, pot-hole, etc.

• Tribology and Lubricants
• /
• v.38 no.4
• /
• pp.170-178
• /
• 2022

Mechanical surface treatment is an excellent approach widely used to modulate and improve the performance and service life of bearings, gears, and frictional joints. The main purpose of this study is to investigate and compare the effect of ultrasonic nanocrystal surface modification (UNSM) and wonder process craft (WPC) on the surface and tribological properties of SUJ2 bearing steel. The surface roughness and hardness of the untreated and treated (UNSM- and WPC-treated) specimens were measured and compared. Their tribological properties were evaluated using a micro-tribometer under grease-lubricated and dry conditions against itself. Surface hardness measurement results revealed that both the UNSM- and WPC-treated specimens had a higher hardness than that of the untreated specimen. The surface roughness of the untreated specimen was reduced after UNSM and WPC treatments. Abrasive wear mode was observed on the surface of the specimens worn under grease-lubricated conditions, while adhesive wear mode was found on the surface of the specimens worn in dry conditions. According to the tribological test results, the friction coefficient and wear rate of the untreated specimens were reduced by the application of both the UNSM and WPC treatments under grease-lubricated and dry conditions.

• Korean Journal of Agricultural Science
• /
• v.49 no.2
• /
• pp.269-284
• /
• 2022

The development of radish collectors has the potential to increase radish yields while decreasing the time and dependence on human labor in a variety of field activities. Stress and fatigue analyses are essential to ensure the optimal design and machine life of any agricultural machinery. The objectives of this research were to analyze the stress and fatigue of major components of a tractor-mounted radish collector under dynamic load conditions in an effort to increase the design dependability and dimensions of the materials. An experiment was conducted to measure the shaft torque of stem-cutting and transferring conveyor motors using rotary torque sensors at different tractor ground speeds with and without a load. The Smith-Watson-Topper mean stress equation and the rain-flow counting technique were utilized to determine the required shear stress with the distribution of the fatigue life cycle. The severity of the operation was assessed using Miner's theory. All running conditions produced more than 10⁷ of high cycle fatigue strength. Furthermore, the highest severity levels for motor shafts used for stem cutting and transferring and for transportation joints and cutting blades were 2.20, 4.24, 2.07, and 1.07, and 1.97, 3.81, 1.73, and 1.07, respectively, with and without a load condition, except for 5.24 for a winch motor shaft under a load. The stress and fatigue analysis presented in this study can aid in the selection of the most appropriate design parameters and material sizes for the successful construction of a tractor-mounted radish collector, which is currently under development.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.2
• /
• pp.379-386
• /
• 2023

When patients suffer from finger injuries, their finger joints can become stiff and inflexible due to decreased ability to exercise the finger tendons. This can lead to a loss of strength and difficulty using their hands. To address this, it is important to provide patients with consistent rehabilitation treatment that can help restore finger flexibility and strength simultaneously. In this study, we propose wearable gloves that use FSRs (force sensitive resistors) for finger strength training. The glove is designed to be adjustable using rubber bands and a custom PCB is designed for signal acquisition. For the evaluation of finger strength training, the result was analyzed in four cases. We suggest a vector that represents the center of five finger forces, and the result shows that the vector can indicate the level of force balance.