• The Journal of Korea Robotics Society
• /
• v.8 no.2
• /
• pp.67-74
• /
• 2013

This paper presents interaction force control between a balancing robot and a human operator. The balancing robot has two wheels to generate movements on the plane. Since the balancing robot is based on position control, the robot tries to maintain a desired angle to be zero when an external force is applied. This leads to the instability of the system. Thus a hybrid force control method is employed to react the external force from the operator to guide the balancing robot to the desired position by a human operator. Therefore, when an operator applies a force to the robot, desired balancing angles should be modified to maintain stable balance. To maintain stable balance under an external force, suitable desired balancing angles are determined along with force magnitudes applied by the operator through experimental studies. Experimental studies confirm the functionality of the proposed method.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.11
• /
• pp.1096-1101
• /
• 2009

In this paper, an embedded system has been designed for force control application to interact between a robot arm and a human operator. Force induced by the human operator is converted to the desired position information for the robot to follow. For smooth operations, the impedance force control algorithm is utilized to represent interaction between the robot and the human operator by filtering the force. To improve the performance of position control of the robot arm, a velocity term has been obtained and tested by several filters. A PD controller for position control has been implemented on an FPGA as well. Experimental studies are conducted with the ROBOKER to test the functionality of the designed hardware.

• The Journal of Korea Robotics Society
• /
• v.12 no.3
• /
• pp.356-364
• /
• 2017

This paper presents a force control based on the observer without taking any force or torque measurement from the robot which allows realizing more stable and robust human robot interaction for the developed multi-functional upper limb rehabilitation robot. The robot has four functional training modes which can be classified by the human robot interaction types: passive, active, assistive, and resistive mode. The proposed observer consists of internal disturbance observer and external force observer for distinctive performance evaluation. Since four training modes can be quantitatively identified as impedance variation, position-based impedance control with feedback and feedforward controller was applied to the assistive training mode. The results showed that the proposed sensorless observer estimated cleaner and more accurate force compared to the force sensor and the impedance controller embedded with the proposed observer completed the assistive training mode safely and properly.

• The Journal of Korea Robotics Society
• /
• v.17 no.2
• /
• pp.152-158
• /
• 2022

As various mobile robots and manipulator robots have been commercialized, robots that can be used by individuals in their daily life have begun to appear. With the development of robots that support daily life, the interaction between robots and humans is becoming more important. Manipulator robots that support daily life must perform tasks such as pressing buttons or picking up objects safely. In many cases, this requires expensive multi-axis force/torque sensors to measure the interaction. In this study, we introduce a low-cost two-axis pressure sensor that can be applied to manipulators for education or research. The proposed system used three force sensitive resistor (FSR) sensors and the structure was fabricated by 3D printing. An experimental device using a load cell was constructed to measure the biaxial pressure. The manufactured prototype was able to distinguish the +-x-axis and the +-y-axis pressures.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.957-958
• /
• 2011

• Interaction and multiscale mechanics
• /
• v.5 no.1
• /
• pp.75-90
• /
• 2012

This paper investigates the effects of sports ground materials on the transfer characteristics of the landing impact force using a coupled foot-shoe-ground interaction model. The impact force resulting from the collision between the sports shoe and the ground is partially dissipated, but the remaining portion transfers to the human body via the lower extremity. However, since the landing impact force is strongly influenced by the sports ground material we consider four different sports grounds, asphalt, urethane, clay and wood. We use a fully coupled 3-D foot-shoe-ground interaction model and we construct the multi-layered composite ground models. Through the numerical simulation, the landing impact characteristics such as the ground reaction force (GRF), the acceleration transfer and the frequency response characteristics are investigated for four different sports grounds. It was found that the risk of injury, associated with the landing impact, was reduced as the ground material changes from asphalt to wood, from the fact that both the peak vertical acceleration and the central frequency monotonically decrease from asphalt to wood. As well, it was found that most of the impact acceleration and frequency was dissipated at the heel, then not much changed from the ankle to the knee.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.8
• /
• pp.777-782
• /
• 2007

Human Robot Interaction(HRI) through a haptic interface plays an important role in controlling robot systems remotely. The augmented usage of bio-signals in the haptic interface is an emerging research area. To consider operator's state in HRI, we used bio-signals such as ECG and blood pressure in our proposed force reflection interface. The variation of operator's state is checked from the information processing of bio-signals. The statistical standard variation in the R-R intervals and blood pressure were used to adaptively adjust force reflection which is generated from environmental condition. To change the pattern of force reflection according to the state of the human operator is our main idea. A set of experiments show the promising results on our concepts of human adaptive interface.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.4
• /
• pp.315-321
• /
• 2013

This paper presents the position-based force control application of a mobile manipulator. The mobile manipulator consists of two six DOF manipulators and a mobile robot. Kinematics of the robot is analyzed and simulated to validate the analysis. A position-based force control technique is applied to the robot by adding an outer loop to interact with the environment. Experimental studies of force control applications of robot arm and interaction with a human operator are conducted. Experimental results show that the robot arm is well regulated to follow the desired force.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.3
• /
• pp.206-212
• /
• 2015

This paper proposes the physical human-robot interaction method that controls the robot arms using ITO touch panel sensor as the skin of robot. To implement physical human-robot interaction, the method of using the force/torque sensor and the method of using tactile sensor created by arranging small element type of sensor have been studied. However, these sensors have the pros and cons in terms of price and performance. This study aims to demonstrate the economy of element type sensor and the accuracy of force/torque sensor through experiment by proposing the method of physical interaction using the touch panel as the skin of robot, and by constructing overall system. The experiment was carried out for the method of controlling the robot arm by installing end-effecter and the method of controlling robot arm by creating the gesture with reference point on the touch panel. Through this experiment, the possibility of teaching control using the touch panel was confirmed.

• Journal of the Korea Safety Management & Science
• /
• v.16 no.4
• /
• pp.101-111
• /
• 2014

Aviation safety is increasingly important to secure the safety of the Republic of Korea Air Force (ROKAF). A critical activity for enhancing aviation safety is to analyze an accident throughly and to identify causes that can explain it reasonably. The results of such a systematic accident investigation can be effectively used for improving information displays, task procedures, and training systems as well as for reorganizing team structure and communication control system. However, the current practice of analyzing aviation accidents in ROKAF is too superficial and simple to diagnose them systematically. Additionally, the current practice does not give a full consideration to human factors that have been identified as main causes of most of the aviation accidents. With this issue in mind, this study aims to suggest a new approach to analyzing aviation accidents related to human factors.The proposed method is developed on the basis of several models and frameworks about system safety, human error, and human-system interaction. Its application to forty-two human factors-related accidents, which have occurred in ROKAF during the last ten years, showed that the proposed method could be a useful tool for analyzing aviation accidents caused by human factors.