• 한국융합학회논문지
• /
• 제12권12호
• /
• pp.153-159
• /
• 2021

본 연구의 목적은 시판되고 있는 청포도 주스와 석류 주스의 노출 시간에 따른 치아 표면 변화에 대한 위험성을 융복합적으로 확인하고자 한다. 발치된 건전 치아를 사용하였으며, 접촉시간에 따른 구분으로 총 8그룹으로 대조군과 10 ml의 시판되는 청포도 주스와 석류 주스를 1, 3, 5, 15, 30, 60, 120분 적용한 실험군 7그룹으로 나누었다. 실험 주스의 pH가 측정되었고 표면의 변화와 미세 형태는 주사전자현미경(Scanning Electron Microscope:SEM)을 통하여 확인하였다. 본 실험에 사용된 청포도 주스는 3.9±0.02, 석류 주스는 3.5±0.01로 제조사가 명시한 주스의 pH 범위보다 청포도 주스는 약간 높았지만 석류 주스는 낮았다. SEM을 통한 결과에서도 대조군과 비교하여 치아 표면의 손상이 생겼다. 접촉 시간이 증가될수록 표면의 손상은 증가되었다. 연구의 결과를 바탕으로 음용 횟수나 구강 내 저류 시간을 줄이고, 치과 임상에서 치아 침식증 환자에게 질환의 진행을 낮출 수 있는 과일 주스에 대한 정확한 정보를 제공해야 할 것이다.

• Restorative Dentistry and Endodontics
• /
• 제28권5호
• /
• pp.363-368
• /
• 2003

The purpose of this study is to evaluate the effect of additional enamel etching with phosphoric acid on the microleakage of the adhesion of self-etching primer system. Class V cavity($4mm{\times}3mm{\times}1.5mm$) preparations with all margins in enamel were prepared on buccal surface of 42 extracted human upper central incisor teeth. Prepared teeth were randomly divided into 3 groups. Group 1：no additional pretreatment with 37% phosphoric acid (NE). Group 2：additional pretreatment with 37% phosphoric acid for 10 seconds (E10s). Group 3：additional pretreatment with 37% phosphoric acid for 20 seconds (E20s). The adhesives(Clearfil SE $Bond^{\circledR}$, Kuraray, Osaka, Japan) and composite resins(Clearfil $AP-X^{\circledR}$, Osaka, Kuraray, Japan) were applied following the manufacturer's instructions. All the specimens were finished with the polishing disc(3M dental product, St Paul, MN, USA), thermocycled for 500 cycles between $5^{\circ}C$ and $55^{\circ}C$ and resected apical 3-mm root. 0.028 stainless steel wire was inserted apically into the pulp chamber of each tooth and sealed into position with sticky wax. Surrounding tooth surface was covered with a nail varnish 2 times except areas 1mm far from all the margins. After drying for one day, soaked the samples in the distilled water. Microleakage was assessed by electrochemical method(System 6514, $Electrometer^{\circledR}$), Keithley, USA) in the distilled water. In this study, the microleakage was the lowest in group 1 (NE) and the highest in group 3(E20s)(NE

• 대한치과교정학회지
• /
• 제17권1호
• /
• pp.85-91
• /
• 1987

The aim of this study was to clarify whether bonding/debonding procedure will affect the occurance of enamel crack. The frequency of enamel crack was compared between before-bonding and after-debonding on 200 human extracted teeth. Each facial surface of the tooth was divided in 9 fragments. A presence of crack, which was classified by its direction as vertical, horizontal and oblique crack, was surveyed in each fragment. Number of all cracks in facial surface was 1355 at before-bonding, and 1605 at after-debonding, so it revealed significant increase rate of $18.5\%$, but compared by fragment, cracks were significantly Increased in OC, OD, CC and GC fragments. All kinds of cracks were significantly increased, especially increase rate of oblique crack reached $54.9\%$. The increase rate of cracks was not superior at any fragment or region, but some evidence was seen in CC fragment. Judging from the above, increase of crack is unavoidable with bonding/debonding procedures.

• 대한치과교정학회지
• /
• 제42권1호
• /
• pp.32-38
• /
• 2012

Objective: The aim of this study was to compare the effects of different enamel conditioning techniques for bracket bonding. Methods: Ninety-one human premolars were randomly divided in six groups of 15 specimens each. The enamel surfaces of the teeth were etched with 35% orthophosphoric acid in Group 1, with a self-etching primer in Group 2, sandblasted in Group 3, sandblasted and etched with 35% orthophosphoric acid in Group 4, conditioned by Er:YAG laser in Group 5 and conditioned by Er:YAG laser and etched with 35% phosphoric acid gel respectively in Group 6. After enamel conditioning procedures, brackets were bonded and shear bonding test was performed. After debonding, adhesive remnant index scores were calculated for all groups. One tooth from each group were inspected by scanning electron microscope for evaluating the enamel surface characteristics. Results: The laser and acid etched group showed the highest mean shear bond strength (SBS) value ($13.61{\pm}1.14$ MPa) while sandblasted group yielded the lowest value ($3.12{\pm}0.61$ MPa). Conclusions: Although the SBS values were higher, the teeth in laser conditioned groups were highly damaged. Therefore, acid etching and self-etching techniques were found to be safer for orthodontic bracket bonding. Sandblasting method was found to generate inadequate bonding strength.

• The Journal of Advanced Prosthodontics
• /
• 제9권1호
• /
• pp.57-66
• /
• 2017

PURPOSE. Cementation failures of restorations are frequently observed in clinical practice. The purpose of this study is to compare the effect of initial and repeated bonding on the bond strengths of different resin cements to enamel and dentin. MATERIALS AND METHODS. Ninety human maxillary central incisors were bisected longitudinally. The 180 tooth halves were divided into 2 groups (n = 90) for enamel and dentin bonding. The enamel and dentin groups were further divided into 3 groups (n = 30) for different resin cement types. Composite resin (Filtek Ultimate) cylinders ($3{\times}3\;mm$) were prepared and luted to enamel and dentin using Variolink II (Group V), RelyX ARC (Group R), or Panavia F 2.0 (Group P) resin cement. After 24 hours, initial shear bond strengths of the resin cements to enamel and dentin were measured. Using new cylinders, the specimens were de-bonded and re-bonded twice to measure the first and the second bond strengths to enamel and dentin. Failure modes and bonding interfaces were examined. Data were statistically analyzed. RESULTS. Initial and repeated bond strengths to enamel were similar for all the groups. The first ($15.3{\pm}2.2\;MPa$) and second ($10.4{\pm}2.2\;MPa$) bond strengths to dentin were significantly higher in Group V (P<.0001). Second bond strengths of dentin groups were significantly lower than initial and first bond strengths to dentin (P<.0001). CONCLUSION. All resin cements have similar initial and repeated bond strengths to enamel. Variolink II has the highest first and second bond strength to dentin. Bond strength to dentin decreases after the first re-bonding for all resin cements.

• Restorative Dentistry and Endodontics
• /
• 제45권1호
• /
• pp.12.1-12.8
• /
• 2020

Objectives: The aim of this in vitro study was to evaluate the microhardness and surface roughness of composite resins before and after tooth bleaching procedures. Materials and Methods: Sixty specimens were prepared of each composite resin (Filtek Supreme XT and Opallis), and BisCover LV surface sealant was applied to half of the specimens. Thirty enamel samples were obtained from the buccal and lingual surfaces of human molars for use as the control group. The surface roughness and microhardness were measured before and after bleaching procedures with 35% hydrogen peroxide or 16% carbamide (n = 10). Data were analyzed using 1-way analysis of variance and the Fisher test (α = 0.05). Results: Neither hydrogen peroxide nor carbamide peroxide treatment significantly altered the hardness of the composite resins, regardless of surface sealant application; however, both treatments significantly decreased the hardness of the tooth samples (p < 0.05). The bleaching did not cause any change in surface roughness, with the exception of the unsealed Opallis composite resin and dental enamel, both of which displayed an increase in surface roughness after bleaching with carbamide peroxide (p < 0.05). Conclusions: The microhardness and surface roughness of enamel and Opallis composite resin were influenced by bleaching procedures.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제30권5호
• /
• pp.438-443
• /
• 2004

Objectives : The proper development of the facial structures relies upon a sequence of tightly regulated signaling interactions between the ectoderm and mesoderm involving the participation of several families of signaling molecules. Among these, bone morphogenetic proteins (BMPs) have been suggested to be a key signal that regulates the development of the mandible and the initiation and morphogenesis of the teeth. The aim of this study was to examine the artificial development of the mandibular structures and to examine the role of BMPs on tooth morphogenesis and differentiation using an organ culture system. Materials and Methods : The tooth germs from Ed 11.5, 13.5 mice were dissected, and transplanted into the diastema of the mandible primordia. The mandibles containing the transplanted tooth germs were cultured in vitro. During this period, beads soaked with BMP4 were implanted around the transplanted tooth germs. In addition, a diastema block containing the transplanted tooth germ was dissected, then transferred to an adult mouse kidney. After the organ culture, the developing mandibular explant was removed from the kidney and prepared for the tissue specimens. Odontogeneis of the transplanted tooth germs was examined after Hematoxylin-eosin, Masson-trichrome staining. Results : Proliferation and differentiation of the tooth germs cultured in the diastema was observed. In the BMP4-treated tooth germs, the formation of the first and second molars was noted. The crown of the developing tooth showed the formation of a mature cusp with the deposition of enamel and dentin matrix. In conclusion, it was confirmed that BMP4 is involved in the formation of a dental crown and the differentiation of ameloblasts and odontoblasts of the molar tooth during the development of the transplanted tooth germs.

• Restorative Dentistry and Endodontics
• /
• 제31권6호
• /
• pp.470-476
• /
• 2006

본 연구는 치아미백용 2.6% hydrogen peroxide 부착대와 통상 home bleaching용으로 안전하다고 알려진 10% carbamide peroxide 미백젤이 법랑질 미세경도에 미치는 영향을 미백을 하지 않은 경우와 비교, 평가하기위하여 시행되었다. 최근에 발거한 사람의 상악 절치 20개를 사용하여 가로, 세로 2 mm의 정사각형 치아편을 각 치아에서 3개씩 절단, 채득한 후 교정용 bracket에 고정하여 시편을 제작하였다. 자원자는 20명을 선정하였고, 각각의 자원자의 치아에 동일 치아에서 제작한 시편이 부착된 bracket을 순면 중앙에 부착하였으며 상악 우측 측절치에 젤을 이용한 군 (Opalescence tooth whitening gel, Ultradent Product Inc, South Jordan, USA), 상악 우측 중절치에 미백을 하지 않은 대조군, 상악 좌측 중절치에 부착대를 이용한 군 (Claren, LG Household & Health Care, Seoul, Korea)을 부착 시켰다. 젤을 이용한 군은 bracket이 부착된 치아에 맞게 상악 우측 측절치부터 우측 소구치까지를 덮는 mouthguard tray를 제작하여 매일 동일시간에 2시간씩 14일 동안 미백을 시행하였으며, 대조군은 부착 28일 동안 미백 치료 없이 구강 내에 위치시켰다. 부착대를 이용한 군은 bracket의 시편을 덮을 수 있는 크기로 상악용 Claren을 절단하여 오전, 오후 각각 30분씩 하루 두 번 부착하여 14일 동안 미백을 시행하였다. 각군 모두 bracket부착 전, 미백 14일 후, 재광화 14일 후의 미세경도를 측정하였으며 측정된 값을 이용하여 미세경도 변화 양상과 변화량을 비교 평가하였다. 치아미백용 2.6% hydrogen peroxide 부착대와 젤 형태의 10% carbamide peroxide 미백제의 미백 전, 미백후, 재광화 후 미세경도 변화 양상이 미백을 하지 않은 대조군과 차이를 보이지 않았으며 (p > 0.05) 미백 전과 미백 후의 미세경도의 차이 미백후와 재광화 후의 미세경도의 차이도 유의할 만한 차이가 없었다 (p > 0.05). 따라서 시중에 판매되고 있는 whitening strip과 미백 젤은 14일 동안의 통상적인 미백과정 동안 법랑질의 미세경도에 영향을 미치지 않는 것으로 사료된다.

• 대한소아치과학회지
• /
• 제30권1호
• /
• pp.153-160
• /
• 2003

연구의 목적은 이산화탄소 레이저의 유치 법랑질 탈회 억제 및 재경화 효과를 레이저형광측정법을 사용하여 평가하는 것이었다. 사람 유치의 건전 평활면으로부터 법랑질 시편을 제작하여, 코카콜라에 담가 24시간 탈회시키는 전후에 정촛점 연속파 또는 탈촛점 펄스파, 3W 또는 6W로 4초간 직경 약 2 mm의 조사점에 이산화탄소 레이저를 조사하고, Diagnodent 측정을 통하여 탈회억제효과와 재경화 효과를 평가하였다. 탈회된 법랑질에 대한 정촛점 연속파 또는 탈촛점 펄스파 조사의 재경화 효과는 두 군 사이에 유의한 차이가 없었으며 모두 탈회 전과 유의한 차이가 없는 수준으로 감소하였다. 건전 법랑질에 대한 3W 또는 6W 탈촛점 펄스파 조사의 탈회 억제 효과에서 3W군은 탈회 후의 측정치가 유의하게 증가하였고(P<0.05), 6W군은 탈회 후 유의한 증가가 없었다. 탈회된 법랑질에 대한 3W또는 6W 탈촛점 펄스파 조사의 재경화 효과에서 3W군은 레이저 조사 후 유의하게 감소하였으나 탈회 전보다 유의하게 컸고(P<0.05), 6W군은 레이저 조사 후 유의하게 감소하였고(P<0.05) 탈회 전과 유의한 차이가 없었다(P>0.05). 유치 법랑질의 색은 6W로 탈회 후 조사하였을 때 갈색 내지 검은색으로 변색되었고 탈회 전 조사하였을 때 갈색으로 변색되었으며, 탈회 전과 후에 3W로 조사하였을 때에는 색의 변화가 없었다.

• 대한치과보존학회:학술대회논문집
• /
• 대한치과보존학회 2003년도 제120회 추계학술대회 제 5차 한ㆍ일 치과보존학회 공동학술대회
• /
• pp.546.1-546
• /
• 2003

Laser doppler flowmeter (LDF) has been applied to the measurement of pulpal blood flow (PBF) in human teeth. As far as we searched, the detection area of the pulp in the blood flow measurement has not been clarified, yet. Therefore, the purpose of this study was to obtain information of the detection area in PBF measurement using LDF. The experiments were performed on the artificial blood circulation in extracted human upper central incisors. The apical portions of examined teeth (n=6) were severed and root canals were enlarged from the apical end to the 2mm incisal to the level of enamel-cement junction. An individual resin cap of each tooth was prepared and a hole was drilled 2mm incisal to enamel-cement junction of the labial side of the cap. The measurement probe of LDF (MBF3D, Moor Instrument, UK) was plugged into the hole of the cap. Heparinized human peripheral blood, which was in advance collected and diluted 3 times with physiological saline, was pumped through the apical foramen of the teeth via a silicone tube and a disposable needle (o.d. 0.7mm) and blood flow signals were monitored. The flux signal significantly increased with the enlargement of the root canal to incisal direction (p<0.01, Friedman analysis). The result indicates that the performance of LDF in PBF with human teeth is limited.