• 환경생물
• /
• 제38권2호
• /
• pp.271-277
• /
• 2020

가습기 살균제 성분(PHMG, PGH, CMIT/MIT)의 노출에 의한 다양한 장기에 대한 독성들에 대해서 피해사례는 계속 증가하고 있으나, 세포모델과 동물모델에서의 연구와 보고는 아직 부족한 실정이다. 심혈관 독성, 간 독성, 배아 독성에 대해서는 최근 알려져 있으나 뇌신경 독성과 피부 독성에 대해서는 상대적으로 적게 알려져 있다. 본 연구에서는 이들 세 가지 성분들의 피부 독성과 뇌신경 독성을 사람 피부섬유세포와 제브라피쉬 동물모델을 대상으로 각각 평가하였다. 사람피부섬유세포에 세 가지의 성분들을 0, 2, 4, 6, 8, 16 mg L^-1 (최종농도)로 처리하였을 때, 세포 생존율은 PHMG가 33%로 가장 낮았고, PGH가 49%, CMIT/MIT가 40%의 생존율을 보였다. 세포배양액 내의 산화물을 정량해본 결과, PHMG 처리된 세포가 28 nmol MDA로 가장 높았고, PGH가 13 nmol MDA, CMIT가 21 nmol MDA를 보였다. 제브라피쉬 사육수조에 PHMG, PGH, CMIT를 40 mg L^-1의 최종농도가 되도록 희석한 후, 제브라피쉬를 30분간 노출시킨 후 중뇌의 광시개영역(optic tectum)을 횡면 미세절단하여 산화물의 생성정도를 비교해본 결과, CMIT/MIT를 처리한 그룹에서 대조군 대비 17배 많은 산화물의 생성이 있었고, PGH를 처리한 그룹에서는 15배, PHMG를 처리한 그룹에서는 11배 많은 산화물이 관찰되어 심각한 뇌신경계 독성을 보여주었다. 결론적으로 세 가지 종류의 가습기 살균제 성분들에서 모두 심각한 피부세포 독성과 뇌신경계 독성이 나타났는데, 피부 독성은 특히 PHMG가, 뇌신경계 독성은 특히 CMIT/MIT가 가장 심각하였다. 이들 결과들은 가습기 살균제에 노출된 어린이들이 뇌신경계 독성을 통하여 언어장애, 운동장애, 발달장애 등을 겪게 될 수도 있음을 실험적으로 제시한다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.88-89
• /
• 2013

A variety of influenza A viruses from animal hosts are continuously prevalent throughout the world which cause human epidemics resulting millions of human infections and enormous industrial and economic damages. Thus, early diagnosis of such pathogen is of paramount importance for biomedical examination and public healthcare screening. To approach this issue, here we propose a fully integrated Rotary genetic analysis system, called Rotary Genetic Analyzer, for on-site detection of influenza A viruses with high speed. The Rotary Genetic Analyzer is made up of four parts including a disposable microchip, a servo motor for precise and high rate spinning of the chip, thermal blocks for temperature control, and a miniaturized optical fluorescence detector as shown Fig. 1. A thermal block made from duralumin is integrated with a film heater at the bottom and a resistance temperature detector (RTD) in the middle. For the efficient performance of RT-PCR, three thermal blocks are placed on the Rotary stage and the temperature of each block is corresponded to the thermal cycling, namely $95^{\circ}C$ (denature), $58^{\circ}C$ (annealing), and $72^{\circ}C$ (extension). Rotary RT-PCR was performed to amplify the target gene which was monitored by an optical fluorescent detector above the extension block. A disposable microdevice (10 cm diameter) consists of a solid-phase extraction based sample pretreatment unit, bead chamber, and 4 ${\mu}L$ of the PCR chamber as shown Fig. 2. The microchip is fabricated using a patterned polycarbonate (PC) sheet with 1 mm thickness and a PC film with 130 ${\mu}m$ thickness, which layers are thermally bonded at $138^{\circ}C$ using acetone vapour. Silicatreated microglass beads with 150~212 ${\mu}L$ diameter are introduced into the sample pretreatment chambers and held in place by weir structure for construction of solid-phase extraction system. Fig. 3 shows strobed images of sequential loading of three samples. Three samples were loaded into the reservoir simultaneously (Fig. 3A), then the influenza A H3N2 viral RNA sample was loaded at 5000 RPM for 10 sec (Fig. 3B). Washing buffer was followed at 5000 RPM for 5 min (Fig. 3C), and angular frequency was decreased to 100 RPM for siphon priming of PCR cocktail to the channel as shown in Figure 3D. Finally the PCR cocktail was loaded to the bead chamber at 2000 RPM for 10 sec, and then RPM was increased up to 5000 RPM for 1 min to obtain the as much as PCR cocktail containing the RNA template (Fig. 3E). In this system, the wastes from RNA samples and washing buffer were transported to the waste chamber, which is fully filled to the chamber with precise optimization. Then, the PCR cocktail was able to transport to the PCR chamber. Fig. 3F shows the final image of the sample pretreatment. PCR cocktail containing RNA template is successfully isolated from waste. To detect the influenza A H3N2 virus, the purified RNA with PCR cocktail in the PCR chamber was amplified by using performed the RNA capture on the proposed microdevice. The fluorescence images were described in Figure 4A at the 0, 40 cycles. The fluorescence signal (40 cycle) was drastically increased confirming the influenza A H3N2 virus. The real-time profiles were successfully obtained using the optical fluorescence detector as shown in Figure 4B. The Rotary PCR and off-chip PCR were compared with same amount of influenza A H3N2 virus. The Ct value of Rotary PCR was smaller than the off-chip PCR without contamination. The whole process of the sample pretreatment and RT-PCR could be accomplished in 30 min on the fully integrated Rotary Genetic Analyzer system. We have demonstrated a fully integrated and portable Rotary Genetic Analyzer for detection of the gene expression of influenza A virus, which has 'Sample-in-answer-out' capability including sample pretreatment, rotary amplification, and optical detection. Target gene amplification was real-time monitored using the integrated Rotary Genetic Analyzer system.