• Korean Journal of Heritage: History & Science
• /
• v.49 no.2
• /
• pp.20-55
• /
• 2016

Koguryo's tomb mural paintings in North Korea are our precious cultural heritage which have been designated as UNESCO World Heritage property receiving high praise in the following criterion, i) exceptional creativeness of human being, ii) representative value showing the stage of development in construction history of East-Asia, iii) aesthetic superiority iv) uniqueness of building construction including tombs' ceiling. Mural paintings have been found from almost 100 tombs of the Koguryo dynasty out of 130 which are scattered across Huanren County, Lianoning Province, Ji'an, Jilin Province in China and Pyongyang in North Korea. Especially, most of them are gathered in Pyongyang from 4th and 5th century. Peculiarly, some of them have been constructed before King Jangsu's transfer of the capital to Pyongyang(AD 427). It can be regarded that Pyongyang territory had been under control of Koguryo and to become a new capital in the near future. And dense emergence of such tombs since the capital transfer from Gungnae City to Pyongyang during the reign of Jangsu is linked closely to the construction of tombs for rulers under strengthen royal authority of Jangsu and centralized system of authoritarian rule. Tomb mural paintings describe the owner's figure pictorially based on the truth just as in his living years. General lifestyles of ruling powers and sovereigns can be seen from the wall paintings portraying several buildings with various styles, figures, manners of living, which are considered that the tomb owner had led politically and sociologically in his life. In spite of not enough proofs to approve figure of architectures or "Gong-Po" in wall paintings on the tombs as those of Koguryo, it is persuasive with consideration for painting and decoration inside the tomb like wooden building in real life for the purpose of reenacting and continuing the tomb owner's luxurious life after death. "Du-Gong-Po-Zak" had appeared in company with Koguryo tomb murals and it can be found in most of the murals. And the emergence of substantial "Gong-Po-Do" can be counted more than a century ahead of the figure in murals. It could be a reasonable assumption as regards Koguryo tomb murals time of appearance match up with production period of Gahyungmyunggi(家形明器) and Hwasangseok(畵像石) Hwasangjeon(畵像塼) Design in the Mural Painting of the East-Han(東漢) Ancient Tombs in China. On this study, architectural "Gong-Po"s described in Koguryo tomb murals are categorized largely in "Bi(non)-Po-Zak-kye", "Jun(semi)-Po-Zak-kye", and "Po-Zak-kye" based on presence of "Ju-Du", "Cheom-Cha", and "Cheom-Cha-Sal-Mi" with developmental aspect, and, "Po-zak" is subdivided as "Bi(non)-Cheul-Mok" and "Cheul-Mok" types.

• Journal of Korean Dental Science
• /
• v.5 no.2
• /
• pp.60-67
• /
• 2012

Purpose: To test the apical leakage prevention performance of three different materials through protein leakage procedures using bovine serum albumin (BSA) and Bradford protein reagent. Materials and Methods: A total of 60 human single-rooted teeth were divided into 4 groups, and conventional root canal filling was done. The root was cut 3 mm from the apex, and a cavity was formed. Proroot MTA (MTA), Fuji II LC (GI), Fuji II LC with XP bond (GIA), and Caviton (CA) were used as experimental materials to fill the cavity in a retrograde filling manner. The extent of BSA leakage was then measured with a ultraviolet visible spectrophotometer 24, 48, and 72 hours after filling. Result: After 24 hours, among the 15 teeth of each group, 2 in MTA, 4 in GI, 3 in GIA, and 7 in CA showed leakage. After 48 hours, 3 in MTA, 5 in GI, 5 in GIA, and 10 in CA had leakage and discoloration. After 72 hours, among the 15 teeth of each group, 3 in MTA, 6 in GI, 5 in GIA, and 10 in CA showed leakage. The leakage in the CA group was greater than that in the MTA group at 48 and 72 hours based on Fisher's exact test (P=0.025), and the difference was statistically significant. Similarly, the leakage in the CA group was greater than that in the MTA group over time based on the Kaplan-Meier survival estimate (P=0.011), and the difference was statistically significant. Conclusion: Glass ionomer, glass ionomer after adhesive application, and MTA all showed leakage. Caviton showed greater leakage compared to MTA 48 and 72 hours after filling, and the difference was statistically significant; thus suggesting that Caviton is not appropriate as retrograde filling material considering its sealing ability.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.12
• /
• pp.1111-1122
• /
• 2020

The purpose of this research aims to develop the creative economy sector of rural communities in Trenggalek Regency, East Java, Indonesia by mapping the creative economy sub-sectors in Trenggalek Regency. The creative economy industry has been shown to have a positive effect on GDP in many developing countries and developed countries. In urban areas, the creative economy is often associated with the development of advanced technology, such that it is unlikely to evolve in rural communities. However, the rural environmental landscape, which not only has a wealth of creative human capital but also a cultural heritage, also encourages the growth of the creative economy sector in rural areas. This qualitative research was conducted for 60 working days through in-depth interviews, focus group discussions, observation and literature review. More precisely, first, it identified the potential of the creative economy both sectorally and regionally. Second, it identified the leading creative economy subsectors and compiled a creative economic development road map. After defining and mapping the potential of the creative economy, four of the sixteen sub-sectors of the creative economy were identified to be developed through a strategic plan for the growth of the creative economy using urban branding, innovative industrial centers and renewable resources.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.16
• /
• pp.6903-6908
• /
• 2015

Background: As smoking is the leading preventable cause of multiple diseases and premature cancer deaths, estimating the burden of cancer attributable to smoking has become the standard in documenting the adverse impact of smoking. In Indonesia, there is a dearth of studies assessing the economic costs of cancers related to smoking. This study aimed to estimate indirect mortality costs of premature cancer deaths and years of potential life lost (YPLL) attributable to smoking among the Indonesian population. Materials and Methods: A prevalence based method was employed. Using national data, we estimated smoking-attributable cancer mortality in 2013. Premature mortality costs and YPLL were estimated by calculating number of cancer deaths, life expectancy, annual income, and workforce participation rate. A human capital approach was used to calculate the present value of lifetime earnings (PVLE). A discount rate of 3% was applied. Results: The study estimated that smoking attributable cancer mortality was 74,440 (30.6% of total cancer deaths), comprised of 95% deaths in men and 5% in women. Cancers attributed to smoking wereresponsible for 1,207,845 YPLL. Cancer mortality costs caused by smoking accounted for USD 1,309 million in 2013. Among all cancers, lung cancer is the leading cause of death and economic burden. Conclusions: Cancers related to smoking pose an enormous economic burden in Indonesia. Therefore, tobacco control efforts need to be prioritized in order to prevent more losses to the nation. The data of this study are important for advocating national tobacco control policy.

• The Journal of the Korea Contents Association
• /
• v.20 no.4
• /
• pp.373-384
• /
• 2020

This study analyzed the 2017 human capital corporate panel data provided by the Korea research institute for vocational education. We examined the mediating effect of ambidexterity innovation on the relationship between employee training and organizational commitment. In addition, we examined the moderating effect of organizational communication between employee training and ambidexterity innovation. The hypothesis test results are as follows. Hypothesis1. Ambidexterity innovation has been shown to partially mediate the relationship between employee training and organizational commitment. Thus, Hypothesis1 was partially supported. Hypothesis2. Organizational communication has been shown to play a positive moderating role in the relationship between employee training and ambidexterity innovation. Thus, hypothesis2 was supported. Based on the empirical results, we suggest implications for academia and practical avenues.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.5
• /
• pp.1845-1850
• /
• 2015

Background: Cancer is recently one of the major concerns of the public health both in the world and Iran. To inform priorities for cancer control, this study estimated years of potential life lost (YPLL) and productivity losses due to cancer-related premature mortality in Iran in 2012. Materials and Methods: The number of cancer deaths by sex for all cancers and the ten leading causes of cancer deaths in Iran in 2012 were obtained from the GLOBOCAN database. The life expectancy method and the human capital approach were used to estimate the YPLL and the value of productivity lost due to cancer-related premature mortality. Results: There were 53,350 cancer-related deaths in Iran. We estimated that these cancer deaths resulted in 1,112,680 YPLL in total, 563,332 (50.6%) in males and 549,348 (49.4%) in females. The top 10 ranked cancers accounted for 75% of total death and 70% of total YPLL in the males and 69% for both death and YPLL in the females. The largest contributors for YPLL in the two genders were stomach and breast cancers, respectively. The total cost of lost productivity due to cancer-related premature mortality discounted at 3% rate in Iran, was US$ 1.93 billion. The most costly cancer for the males was stomach, while for the females it was breast cancer. The percentage of the total costs that were attributable to the top 10 cancers was 67% in the males and 71% in the females. Conclusions: The YPLL and productivity losses due to cancer-related premature mortality are substantial in Iran. Setting resource allocation priorities to cancers that occur in younger working-age individuals (such as brain and central nervous system) and/or cancers with high incidence and mortality rates (such as stomach and breast) could potentially decrease the productivity losses and the YPLL to a great extent in Iran.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.10
• /
• pp.4729-4733
• /
• 2016

Objectives: Lung cancer is a major public health problem and one of the most costly illnesses. The study aimed to estimate the economic burden of lung cancer in Iran in 2014. Methods: A cross-sectional study was conducted to estimate the direct and indirect costs for patients with lung cancer using a prevalence-based approach. A human capital approach was employed to estimate the indirect costs. Data were obtained from several sources such as through patient interview using structured questionnaire, medical records, the GLOBOCAN databases, the Iranian Statistical Center, the Iranian Ministry of Cooperation, Labor and Social Welfare, and the Institute for Health Metrics and Evaluation (IHME). Results: The economic burden of lung cancer in Iran in the year 2014 was 3,225,998,555,090 IR. The main components of the cost were associated with mortality (81.9 %) and hospitalization (7.6 %). The costs of direct medical care, non-medical aspects, patient time, and mortality accounted for 10.8%, 2.7%, 4.5%, and 81.5% of the total cost, respectively. Conclusion: Findings from this study indicated that the economic burden of lung cancer is substantial both to Iran's health system and to society as a whole. Early diagnosis, strengthening cancer prevention, implementing new cancer therapy and medical technology, and effective smoking-cessation interventions could offset some of the costs associated with lung cancer in Iran.

• World Technopolis Review
• /
• v.6 no.2
• /
• pp.148-158
• /
• 2017

Sejong City, which has been chosen as a new administrative capital of South Korea, has completed the first phase of its development plan with the construction of the facilities needed to accommodate central administrative organizations and the required accompanying population. Now, it is undergoing the second phase of development with a focus on strengthening the region's innovation capacity to catalyze endogenous development. The strategy for phase II is to establish a regional innovation system including building necessary infrastructure and attracting innovation agents such as universities, businesses, and research institutes. The first step for this is developing a research complex, tentatively named Tech Valley, that includes universities, research institutes, and businesses, and building infrastructure comprising a science complex, a knowledge industry center, and support facilities. Phase II of the city's development initiative includes the establishment of a joint university campus, which is to serve as a center to promote cooperation among industry actors, universities, and research institutes. The concept of a joint campus has been drawn from a need to enhance capacity for innovation and specialization in the region's industries and to maximize synergy among participating universities through the sharing of research equipment, facilities, and programs. The joint campus is expected to play a key role in creating an innovation system in the region by enhancing research capacity for strategic industries, cultivating highly skilled human resources, and leading industry-academia-research cooperation. In order to ensure the sustainable development of the new city, there is a growing need to have a main player in place that could lead the region's economic development. The joint campus will propel industrial specialization and serve as a catalyst to attract competent universities to the region. This paper will examine the concept, major functions, and the establishment and operation of the joint campus.

• Journal of Microbiology and Biotechnology
• /
• v.30 no.3
• /
• pp.313-324
• /
• 2020

Coronavirus disease 2019 (COVID-19), which causes serious respiratory illness such as pneumonia and lung failure, was first reported in Wuhan, the capital of Hubei, China. The etiological agent of COVID-19 has been confirmed as a novel coronavirus, now known as severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), which is most likely originated from zoonotic coronaviruses, like SARS-CoV, which emerged in 2002. Within a few months of the first report, SARS-CoV-2 had spread across China and worldwide, reaching a pandemic level. As COVID-19 has triggered enormous human casualties and serious economic loss posing global threat, an understanding of the ongoing situation and the development of strategies to contain the virus's spread are urgently needed. Currently, various diagnostic kits to test for COVID-19 are available and several repurposing therapeutics for COVID-19 have shown to be clinically effective. In addition, global institutions and companies have begun to develop vaccines for the prevention of COVID-19. Here, we review the current status of epidemiology, diagnosis, treatment, and vaccine development for COVID-19.

• International Journal of Quality Innovation
• /
• v.9 no.3
• /
• pp.71-91
• /
• 2008

The definition of cycle time is the time from the wafer start to the wafer output. It usually takes one or two months to get the product since customer decides to produce it. The cycle time is a critical factor for customer satisfaction because it represents the response time to the market. Long cycle time reflects the ineffective investment for the capital. The cycle time is very important for foundry because long cycle time will cause customer unsatisfied and the order loss. Consequently, all of the foundries put lots of human source in the cycle time improvement. Usually, we make decisions based on the experience in the cycle time management. We have no mechanism or theory for cycle time management. We do work-in-process (WIP) management based on turn rate and standard WIP (STD WIP) set by experiences. But the experience didn't mean the optimal solution, when the situation changed, the cycle time or the standard WIP will also be changed. The experience will not always be applicable. If we only have the experience and no mechanism, management will not be work out. After interview several foundry fab managers, all of the fab can't reflect the situation. That is, all of them will have an impact period after product mix or utilization varied. In this study, we want to develop a formula for standard WIP and use statistical process control (SPC) concept to set WIP upper/lower limit level. When WIP exceed the limit level, it will trigger action plans to compensate WIP Profile. If WIP Profile balances, we don't need too much WIP. So WIP level could be reduced and cycle time also could be reduced.