• Journal of Ship and Ocean Technology
• /
• 제8권4호
• /
• pp.17-25
• /
• 2004

Hull girder stress monitoring system for container ship uses four long-base-strain-gages at mid-ship to monitor the resultant stresses and the applied moment components of horizontal, vertical and torsional moments. The bending moments are estimated by using the conventional strain-moment relations, however, the torsional moment related to the warping strain requires the assumption of the shape of torsional moments over the hull girder. Though this shape could be a sine function with an adequate period, it largely depends upon certain empirical formulas. This paper introduces additional four long-base-strain-gages at mid-ship to derive the longitudinal slope of the warping strain because this slope is directly related to the torsional moment by Bi-moment concept. An open-channel-type cantilever beam has been selected as a simplified model for container ship and the result has proved that the suggested concepts can estimate the torsional component accurately. Finally this method can become reliable technique to derive all external moments in hull girder stress monitoring system for container ships.

• 대한조선학회논문집
• /
• 제45권3호
• /
• pp.337-343
• /
• 2008

There are various hull types on the mid-size superyachts around $30\;{\sim}\;45m$. In any case, it is important to design the proper hull shape in viewpoint of the reduction of wave resistance, because small vessels such as superyachts are running at relatively higher Froude Number than other merchant ships. FLUENT with a VOF option was employed to investigate the flow fields around the superyachts having three-typical hull types: U-, V-types and catamaran. Overall performances including free surface flow were compared to figure out hydrodynamic characteristics of superyachy by numerical simulation.

• 한국해양공학회지
• /
• 제15권1호
• /
• pp.1-6
• /
• 2001

This study focuses on the potential flow analysis for a hull with the transom stern. The method is based on a low order panel method. The Kelvin type free-surface boundary condition which is known to better fit experimental data for a high speed is applied. To treat a dry transom stern effect a special treatment for the free-surface boundary condition is adopted at the free-surface region after the transom stern. Trim and sinkage, which are important in high speed ships, are considered by an iterative method. Pressure and momentum approaches are used to calculate the wave resistance. Numerical calculations are performed for Athena hull and these results are compared with the experimental data and also other computational results.

• 한국해양환경ㆍ에너지학회지
• /
• 제9권2호
• /
• pp.92-97
• /
• 2006

수치계산을 통해 소형 고속선의 선형설계를 수행하였다. 선형변환 프로그램인 HCAD를 사용하고 차인형 선형을 기준선으로 하여 둥근바닥 선형을 설계하였다. WAVIS를 시용하여 두 가지 선형에 대한 선체주위의 유동장과 조파저항 계산 결과를 보였다. 차인형 선형의 저항특성이 둥근 바닥선형에 비해 다소 크게 나타났으나 소형 조선소의 건조비를 감안하여 차인형 선형의 선수부 개량과 선미 웨지의 설계를 통해 조파저항의 감소를 시도하였다. 수치계산 결과 선미 웨지의 적용에 의해 차인형 선형의 조파저항성능이 고속영역에서 개선되었음을 확인하였다.

• 해양환경안전학회지
• /
• 제21권5호
• /
• pp.552-557
• /
• 2015

본 연구에서는 선미형상을 고려한 조종성능을 심수역 뿐만 아니라 천수역에 대해서 수치 시뮬레이션을 통해 검토하였다. 선미형상을 나타내는 파라메터 중 $C_{wa}$를 미소(${\pm}2%$)하게 변화시킴으로써 각 수역에서의 침로안정성, 선회 및 지그재그 성능이 어떤 변화를 보이고 그 경향이 어떻게 변화하는 지를 검토하였다. 선박의 조종성능 관점에서 흘수 대 수심의 비(=d/H)가 0.5 부근에서의 조종성에 큰 변화를 가져오는 중요 지점임을 알 수 있었고, 비대선(VLCC, 탱커 등)과 세장선(컨테이너)의 경우 선미형상의 변화에 따라 조종성능의 변화 정도가 많은 차이를 가질 수 있음을 알 수 있었다. 또한, $C_{wa}$를 감소(U형에 근접)시키면 선회운동에 있어서 advance 및 tactical diameter가 증가하고, 지그재그 운동에서는 track reach는 증가하지만 각 overshoot angle들은 감소한다. 이와 반대로, $C_{wa}$를 증가(V형에 근접)시키면 선회운동에 있어서 advance 및 tactical diameter는 감소, 지그재그 운동에서는 track reach는 감소, 각 overshoot angle 들은 증가함을 알 수 있었다.

• 한국해양공학회지
• /
• 제17권2호
• /
• pp.67-71
• /
• 2003

Using motions (Maruo) and wave reflection (the author), speed loss due to wind (van Berlekom) and ITTC standard spectrum, and various effects of weather(:such as weather intensity, ship type, ship size and draught) on ship speed performance at sea were investigated. Further, a comparison of the relative effects of weather and hull roughness on speed loss was also studied for a VLCC.

• 대한조선학회논문집
• /
• 제34권1호
• /
• pp.87-92
• /
• 1997

본 연구는 총톤수 89톤급 어선의 초기선형을 개발하기 위하여 한국어선협회와 공동으로 수행되었다. 각형정과 배수량형의 두가지 기본선형의 저항성능을 실험적 방법에 의해 비교 연구하였다.

• Structural Engineering and Mechanics
• /
• 제81권6호
• /
• pp.781-790
• /
• 2022

The present paper describes a general procedure of the structural safety assessment for the independent type C tank of LNG bunkering ship. This strength assessment procedure consists of two main scheme, global Finite Element Analysis (FEA) model primarily for hull structure assessment and detailed LNG Tank structures FEA model including the cylindrical tank itself and saddle-support structures. Two kinds of mechanism are used, fixed and slides constraints in fore and rear of the saddle-support structures that result in a variation of the reaction forces. Finite Element (FE) analyses have been performed and verified by the strength acceptance criteria to evaluate the safety adequacy of yielding and buckling of the hull and supporting structures. The detail of FE model for an LNG type C tank and its saddle supports was made, which includes the structural members such as cylindrical tank shell, ring stiffeners, swash bulkhead, and saddle supports. Subsequently, the FE buckling analysis of the Type C tank has been performed under external pressure following International Gas Containment (IGC) code requirements. Meanwhile, the assessment is also performed for yielding and buckling strength evaluation of the cylindrical LNG tank according to the PD 5500 unfired fusion welded pressure vessels code. Finally, a complete procedure for assessing the structural strength of 500 CBM LNG cargo tank, saddle support and hull structures have been provided.

• 대한조선학회논문집
• /
• 제41권1호
• /
• pp.15-22
• /
• 2004

Twin-skeg type stern shapes are recently adopted for very large commercial ships. However it is difficult to apply a CFD system to a hull form having twin-skeg, since grid topology around a twin-skeg type stern is more complicated than that of a conventional single-screw ship, or of an open-shaft type twin-screw ship with center-skeg. In the present study a surface mesh generator and a multi-block field grid generation program have been developed for twin-skeg type stern. Furthermore, multi-block flow solvers are utilized for potential and viscous flow analysis around a twin-skeg type stern The present computational system is applied to a 15,000TEU container ship with twin-skeg to prove the applicability. Wave profiles and wake distribution are calculated using the developed flow analysis tools and the results are compared with towing tank measurements.

• 한국해양공학회지
• /
• 제13권2호통권32호
• /
• pp.168-175
• /
• 1999

In the present paper, a hull form for the turtle boat type incinerating vessel was developed based on the Finite source Distribution Method(FDM) and 1-$C_p$ method. In order to obtain proper hull form within the limited time and budget, a computer program OCL(Optimization of $C_p$ and LCB) was developed adn used. For the confirmation of the theoretical results by OCL, these theoretical results were compared with results of model test in the circulating water channel (CWC)in Chosun University.