• 대한조선학회논문집
• /
• 제34권3호
• /
• pp.104-112
• /
• 1997

선각의 곡면 가공을 위한 선상가열법은 숙련된 기능공의 경험에 전적으로 의존하고 있으며, 각 조선소에서는 생산성 향상을 위한 자동화 기술을 절실히 요구하고 있다. 선상가열에 의한 곡면형성 과정을 역학적으로 시뮬레이션 하기 위해서는 초고속 컴퓨터를 이용하더라도 수십시간의 방대한 계산이 요구되는 대변형 열탄소성 해석이 필요하다. 본 연구에서는 선상가열에 의한 판의 변형을 효율적으로 정확하게 계산하기 위한 간이 열탄소성 해석 기법을 개발하고, 일련의 선상가열 실험을 통해 그 정확성을 확인하였다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2010년도 춘계학술발표대회 초록집
• /
• pp.60-60
• /
• 2010

Since the curved hull plate was made by a series of manufacturing process including cold bending, manual local heating and correction work, the accuracy of curved plate strongly depends on the proficiency of worker. So the demands on the automatic local heating system for curved hull plate have continuously increased and the various researches relevant to it have been performed. Generally, the heat sources used for local heating were flame and induction heat. In terms of initial cost, flame heating is in a better favorable position than induction heating. However, from the viewpoint of the control of heat, induction heating has more advantage. So the various researches related to apply the induction heating to the automatic forming system has been performed. The purpose of this study is to establish the proper capacity of high frequency induction heating system for forming the curved hull plate. In order to do it, the proper coil shape for local heating was designed and the efficiency of induction heating system was determined by comparing of temperature results obtained by FEA and experiment. With the results, the extensive FEA was performed to identify the effect of heated plate dimension, cooling method and the capacity of induction heating system on the amount of heat loss introduced by induction heating. Based on the results, the proper capacity of high frequency induction heating system was proposed.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 춘계학술대회 논문집
• /
• pp.215-219
• /
• 2009

For the effective manufacture of doubly curved metal plates, a line array roll set (LARS) process is proposed. The suggested process utilizes a pair of upper and lower symmetric roll assemblies. In the process, the initial plate is progressed into the final shape in a stepwise or pathwise manner according to the basic principle of the incremental forming process. In this work, the intermediate shape which is closest to a final shape is proposed to fabricate the desired shape effectively in design of forming schedule. The intermediate shape has homogeneous curvature in a longitudinal and transverse direction so that it can be fabricated easily without complicated controls of rolls in the roll set. The method of approximation using genetic algorithm is proposed and applied to some actual ship hulls to evaluate the efficiency of the algorithm.

• 제어로봇시스템학회논문지
• /
• 제19권11호
• /
• pp.968-973
• /
• 2013

In the transportation industry, especially in the shipbuilding process, 3D surface measurement of large-scale hull pieces is needed for fabrication and assembly. We suggest an efficient method for checking the shape of curved plates under the forming operation with short time by measuring 3D profiles along the multi lines of the target surface. For accurate profile reconstruction, 2D camera calibration and 3D calibration using gauge blocks were performed. The evaluation test shows that the measurement accuracy is within the boundary of tolerance required in the shipbuilding process.

• 한국해양공학회지
• /
• 제23권1호
• /
• pp.135-139
• /
• 2009

In the line heating for the plate forming of a ship's hull, an in line assessment of completion is necessary for an automated production system. In the current curved plate forming process, a fabricated plate is compared to a template that is made in the mold loft and is used for the determination of the heating line for the next step. In this paper, a new method is presented for the in line assessment of completion for curved plate forming. This method uses a 3-D scanner. For the registration of the scanned data for a surface and the target surface, the ICP (Iterative Closest Points) method was adopted. A computer program was developed to carry out the registration, check for similarities, visualize the surface, and control the results. This program was applied to a sample curved plate forming process.

• 대한조선학회논문집
• /
• 제48권2호
• /
• pp.128-133
• /
• 2011

In the present study, the flow fields in between the propeller and the semi-spade rudder are investigated by using PIV technique to find out the influences of both simulated hull wake and propeller wake on the incident flow to the rudder. The velocity fields are measured at the propeller rotation angle of $180^{\circ}$ and the rudder deflection angles of $0^{\circ}$. Flow fields measured at each rudder deflection angle are analyzed in terms of angle-of-attack against the rudder leading edge. The hull wake increases the angle-of-attack more than that in the uniform inflow condition, forming the angle-of-attack of about $20^{\circ}$ at 0.7R(R=propeller radius) position. The distribution of the angle-of-attack is strongly affected by the stagnation point around the leading edge and camber effect of the rudder. These effects provide asymmetric distribution of angle-of-attack with respect to the leading edge of the rudder.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 추계학술대회 논문집
• /
• pp.315-316
• /
• 2007

• 대한조선학회논문집
• /
• 제35권2호
• /
• pp.104-113
• /
• 1998

선박 생산 현장에서는 선체의 곡가공을 위해 선상가열법이 널리 사용되고 있다. 최근 선박 생산성 향상을 위하여 선상가열법에 의한 강판 곡가공 자동화 시스템에 대한 연구가 활발히 진행되고 있으나, 그 연구들은 주로 각각의 가정된 역학 모델을 도입하여 가열에 의한 판의 변형 거동을 해석하는 데에 집중되고 있고, 실제 곡면 가공에 이용될만한 실용성있는 가열선 결정 방법을 제시하는 것은 드물다. 본 논문에서는 선상가열 공정을 시뮬레이션하기 위해 새로운 가열선 결정 알고리즘을 제안한다. 이 알고리즘의 특징은 가공곡면과 목적곡면의 차이를 나타내는 변위차이곡면의 곡률을 계산하는 것이다. 몇 가지의 전형적인 곡면 형상에 대해 점검한 결과, 실용성과 적용 가능성을 확인하였다.

• 대한조선학회논문집
• /
• 제45권6호
• /
• pp.703-709
• /
• 2008

In the shipyard, line heating and triangle heating are two major processes for forming curved plates in various shapes. While there have been many studies on line heating, triangle heating has been rarely studied due to its complicated heating process with irregular multi-heating paths and highly concentrated heat input. As the triangle heating process is one of the most labor-consuming jobs in shipyards, it is essential to study the automation as well as improvement of triangle heating process in order to increase hull forming productivity. In this study, a pioneering attempt to simulate triangle heating was made. A circular disk-spring model was proposed for elasto-plastic analysis procedure of triangle heating and the inherent strain method was also used to analyze the deformation of plates. Simulation results were compared with those of experiments and showed good agreement. It is shown that the present approach including analysis model used in this study is effective to simulate the triangle heating for plate forming process in shipbuilding.

• 대한조선학회논문집
• /
• 제38권2호
• /
• pp.62-70
• /
• 2001

선체 외판은 복잡한 3차원 곡면 형상이며 이의 제작을 위한 곡가공은 조선에 있어서 필수적인 공정이다. 곡가공 공정은 주된 1차곡 성형을 위한 프레스 공정과 2차 이상의 나머지 곡 성형을 위한 열간가공 공정으로 이루어진다. 특히 전체 작업량의 50% 이상을 점하는 열간가공 공정은 숙련된 기능공의 작업 경험에 전적으로 의존하고 있다. 이의 자동화를 위한 많은 연구가 있었으나 최근까지의 연구는 주로 선상가열에 한정되어 있으며 삼각가열에 대한 연구는 극히 미미한 실정이다. 본 연구는 향후 삼각가열에 대한 효율적인 변형해석 기법을 개발하기 위한 기초 연구로서 삼각가열에 의한 판의 변형특성을 명확히 하는데 그 주안점을 두었다. 우선, 실제 조선소에서 현장조건 그대로 일련의 선가열 및 삼각가열 실험을 수행하여 각각의 변형특성을 비교 분석하였으며 상변태온도 이상의 고온영역을 확인함으로써 그 변형특성을 합리적으로 해명하였다. 또한, 가열시편에 대한 물리시험을 통해 현재 조선소에서 행해지는 열간가공 방법이 선각재료의 성질 변화에 미치는 영향을 검토하였다.