• 제목/요약/키워드: Hub shape

검색결과 99건 처리시간 0.03초

API 617 규격에 의거한 프로세스 가스 터보압축기의 로터다이나믹 해석 및 안정성 검토 (A Rotordynamic and Stability Analysis of Process Gas Turbo-Compressor in accordance with API 617 Standard)

  • 김병옥;이안성
    • 한국유체기계학회 논문집
    • /
    • 제12권5호
    • /
    • pp.47-53
    • /
    • 2009
  • A rotordynamic and detailed stability analysis in accordance with API 617 standard were performed with a turbo-compressor, which is one of key rotating machinery in refinery, petroleum, and power plants. The system is composed of rotor shaft, impeller, sleeve hub, balance drum, and coupling hub. The rotor system is supported by tilting pad bearings, which has 5 pads and pad on loading condition. The rotordynamic analysis specified by API 617 includes the critical speed map, mode shape analysis, Campbell diagram, unbalance response analysis, and stability analysis. In particular, the specifications of stability analysis consist of a Level 1 analysis that approximates the destabilizing effects of the labyrinth seals and aerodynamic excitations, and Level 2 analysis that includes a detailed labyrinth seal aerodynamic analysis. The results of a rotordynamic analysis and stability analysis can evaluate the operating compressor health and can be utilized as a guide of its maintenance, repair and trouble solution.

와이블 형상계수에 따른 이용률 변화 (Variation of Capacity Factors by Weibull Shape Parameters)

  • 권일한;김진한;백인수;유능수
    • 한국태양에너지학회 논문집
    • /
    • 제33권1호
    • /
    • pp.32-39
    • /
    • 2013
  • Effects of Weibull shape parameter, k, on capacity factors of wind turbines were investigated. Wind distributions with mean wind speeds of 5 m/s, 6 m/s, 7 m/s and 8 m/s were simulated and used to estimate the annual energy productions and capacity factors of a 2MW wind turbine for various Weibull shape parameters. It was found from the study that the capacity factors of wind turbines are much affected by Weibull shape parameters. When the annual mean wind speed at the hub height of a wind turbine was about 7 m/s, and the air density was assumed to be 1.225 $kg/m^3$, the maximum capacity factor of a 2 MW wind turbine having a rated wind speed of 13 m/s was found to occur with the shape parameter of 2. It was also found that as the mean wind speed increased, the Weibull k parameter which yielded the maximum capacity factor increased. The simulated results were also validated by predictions of capacity factors of wind turbines using wind data measured in complex terrain.

A Suggestion for the Strategic Choice of Seoul to be a Network Center in Northeast Asia

  • Ahn, Kun-Hyuck;Ohn, Yeong-Te
    • 지역연구
    • /
    • 제15권2호
    • /
    • pp.155-187
    • /
    • 1999
  • The East Asian Region has experienced remarkable economic growth and transformation of interurban networking over the past three decades, and urban competiti veness for a networking hub in this region has become a critical issue confronting cities. Competitiveness of the Seoul capital region for a networking hub in Northeast Asia is outstripped by other competing cities in East Asia, notwithstanding its geo-politically and geo-economically advantageous location in this region. In this paper, we aim to appraise the Seoul capital region's competitiveness in terms of logistics distribution, financial function and logistics distribution, financial function and agglomeration of transnational corporations (especially of RHOs and other managerial functions), and to advance the networking strategies of the region for a Northeast Asia hyb. As a result of analysis, we suggest that the Seoul capital region be developed as a Northeast Asian center for regional headquarters or leading global corporations and financial services for being a strategic nodal point in Northeast Asia in the 21st century. A recent survey shows that where to locate an RHQ is influenced by various factors, such as potential market and manufacturing site in the city's hinterland, quality of life, such things as culture, health, safety, education, a well-educated, English-speaking population, reliable air transport, state-of-the-art communications, and an active policy to offer foreign companies generous incentives. The Seoul capital region, which is located at a strategic nodal point advantageous as a springboard for its Northeast Asian hinterland, cannot meet the other conditions mentioned above. To overcome these drawbacks in attracting transnational capital and to create competitiveness as a strategic hub of RHQs in Northeast Asia, it is urgent to initiate a structural reform of the Korean economy, politics, and overall society, to minimize the regulation of FDI, and to provide various incentives for foreign investment. Moreover, we propose the construction of an 'International Business Town' in the Seoul capital region, as a medium to intermediate these strategies and to shape them in a spatial scale. The projected 'International Business Town(IBT)' will be a 'free city' open to international business in which liberal economic activities are guaranteed by special legislation and administration, infrastructures needed for international and improved accessibility to the airport are furnished, and the preference of foreign high-income investors for cultural and living environment are satisfactorily met. IBT is conspicuously differentiated from a raft of other cities' incentives in that it combines deregulation and incentive programs to attract the investment of transnational capital, with a spatial program of offering an urban environment preferred by the high-income investors for cultural and living environment are satisfactorily met. IBT is conspicuously differentiated from a raft of other cities' incentives in that it combines deregulation and incentive programs to attract the investment of transnational capita, with a spatial program of offering an urban environment preferred by the high-income and managerial class. Furthermore, it can be an excellent way of overcoming the xenophobia that has spread among the Korean population by concentrating foreign businesses and their lifestyles in a specific foreign businesses and their lifestyles in a specific zone. In conclusion, 'International Business Town', in line with other legislative and administrative incentive programs, will function as a driving force to make the Seoul capital regional more competitive as a regional business hub in Northeast Asia.

  • PDF

허브클러치 제품의 피어싱 펀치 및 금형 형상 최적화를 위한 수치접근법 (Numerical Approach to Optimize Piercing Punch and Die Shape in Hub Clutch Product)

  • 구본준;홍석무
    • 한국산학기술학회논문지
    • /
    • 제20권9호
    • /
    • pp.517-524
    • /
    • 2019
  • 오버드라이버 허브클러치는 자동차 6단 자동 변속기 미션에 장착되어 엔진의 여유출력을 이용해 연료사용을 절감시켜주는 부품이다. 본 연구에서는 오버드라이버 허브클러치 제품에 대해 피어싱 공정 중 펀치에 가해지는 하중 및 소재 처짐량을 최소화 하고자 한다. 공정 중 펀치의 하중과 처짐량에 영향을 줄 수 있는 다이 클리어런스(die clearance)와 전단각도(shear angle) 그리고 마찰계수(friction coefficient)를 설계 변수로 설정했다. 또한 펀치의 하중과 소재 처짐량에 대해 각 설계 변수들의 영향도를 확인하기 위해 민감도 분석(sensitivity analysis)을 진행했다. 그 결과 전단 각도, 마찰 계수, 다이 클리어런스 순으로 하중 및 처짐량에 대해 민감한 것으로 조사되었다. 이를 통해 펀치의 하중과 소재 처짐량을 목적함수로 설정하고, 반응표면법(Response Surface Method)을 통해 각 설계 변수들과 목적함수의 방정식을 도출했다. 이를 통해 설정된 설계 변수들의 최적 값을 도출해 유한요소해석에 적용한 결과 펀치의 하중 및 소재의 처짐량이 기존대비 22.14% 개선됐다.

경주용 자동차 브레이크 디스크 형상에서의 열 응력 및 구조 해석에 관한 융합 연구 (A Convergent Investigation on Structural Analysis with Thermal Stress at the Shape of Brake Disk for Racing Car)

  • 오범석;조재웅
    • 한국융합학회논문지
    • /
    • 제11권6호
    • /
    • pp.209-213
    • /
    • 2020
  • 본 연구에서는 경주용 자동차에서 기존에 사용 중인 형상을 가진 모델 A와 경량화를 한 모델 B를 설계하고 열 변형과 열응력을 동반한 구조해석을 하였다. Model A가 Model B에 비하여 최고온도가 낮음을 보인다. 다른 냉각 조건이 주어지지 않고 디스크의 형상에 따른 냉각성능은 Model A가 더 뛰어남을 알 수 있다. Model A가 Model B에 비하여 거의 2배 이상으로 그 열응력이 낮아져 내구성면에서도 우수함을 알 수 있었다. 응력이 가장 크게 나타나는 부분은 형상에 관계없이 허브와 접합되는 구멍으로 나타났다. 본 연구에서의 해석결과는 실제 자동차 브레이크 디스크의 형상을 설계하는데 있어서 유용하다고 보인다. 본 연구에서 얻은 해석 결과는 실제적으로 경주용 자동차 브레이크 디스크의 강도를 파악하는 데에 적용될 수 있다. 경주용 자동차 브레이크 디스크의 해석 결과를 이용함으로서, 본 연구가 미적인 설계 및 해석이 적용된 융합 연구라고 보여진다.

3D 프린팅과 구조해석을 이용한 맨홀의 부양장치 설계 및 제작 (Design and Prototyping of Lifting Devices for Manhole Cover using Structural Analysis and 3D Printing)

  • 이형욱
    • 한국산학기술학회논문지
    • /
    • 제19권10호
    • /
    • pp.648-654
    • /
    • 2018
  • 본 노면에 설치되어있는 맨홀의 지속적인 관리를 위해서는 맨홀의 개폐가 쉬워야 한다. 가혹한 조건하에 있는 맨홀은 틀과 커버가 고착되어 개폐가 어렵기 때문에 맨홀을 열 때 부양이 가능한 맨홀이 요구된다. 본 연구에서는 잠금식 맨홀을 부양식 맨홀로 개선하기 위한 부양 기구의 설계를 진행하였다. 잠금식 맨홀의 기구는 중앙에 위치한 볼트를 돌리면 볼트와 연결된 허브가 하강하고, 허브와 연결되어 있는 후크를 회전시키게 된다. 후크의 끝단이 맨홀 틀에 걸리도록 되어있다. 본 연구에서는 맨홀의 부양이 가능하도록 후크에 보조장치를 설치하도록 하였다. 부양 기능을 수행할 후크의 항복응력의 70%를 기준으로 약 300kg의 부양력을 지지할 수 있도록 구조를 설계하였다. 유한요소법을 이용한 구조해석을 통하여 형상 설계를 수행하였다. 우선 단순화된 2차원 모델로 1차 기초설계를 수행하고, 3차원 모델을 통하여 부착위치와 형상을 설계하였다. 설계된 형상에 대하여 구조적 문제점을 찾아보기 위하여 3D 프린팅을 통하여 축소 모델을 출력하였고, 기능이 작동함을 확인하였다. 최종적으로 가공을 통하여 부양 기구를 제작하여 기존의 잠금식 맨홀에 적용한 결과 평균 6.1 mm 정도의 부양이 가능함을 확인하였다.

nT-T/n 단면형상을 갖는 프로펠러 뿌리 필렛의 구조 성능 분석과 설계방안에 관한 연구 (A Study on the Structural Performance and the Design of Propeller Root Fillet Surfaces having nT-T/n section)

  • 유원선
    • 대한조선학회논문집
    • /
    • 제52권5호
    • /
    • pp.372-379
    • /
    • 2015
  • The blade root fillets which have strong influences on the performance of propellers in the both structural and hydrodynamic points of view, are mechanical parts for smooth connection surface with a blade and a hub. A few related researches (Sabol, 1983; Kennedy, 1997) have noted that 3T-T/3 double radius section design would be suitable for reducing Stress Concentration Factor(SCF) and increasing Cavitation Inception Speed(CIS). In this paper, it is confirmed that this compound cross-section design has come close to the optimum solution in the shape optimization standpoint so that it could protect the propeller blade under the frequent and various loading cases. On that basis, we suggest the definite and simple fillet design methodology that has the cross-section with nT-T/n compound radius and elliptic shape which could sustain the given derivatives information as well as the offsets at the boundary and all inner region of the fillet surface. In addition, the result of design is presented in form of IGES file format in order to connect with NC machine seamlessly.

케이블 스포크 휠 지붕 시스템의 비선형 거동 (Nonlinear Behaviors of Cable Spoke Wheel Roof Systems)

  • 박강근;이미향;박미진
    • 한국공간구조학회논문집
    • /
    • 제17권1호
    • /
    • pp.31-40
    • /
    • 2017
  • The objective of this study is to analysis the mechanical characteristics and nonlinear behaviors on the geometric nonlinear behavior of a cable spoke wheel roof system for long span lightweight roof structures. The weight of a cable spoke wheel roof dramatically can reduce and the cable roof system can easily make the required rigidity and shape by the sag ratio and pretension forces. Determining the pretension and initial sag of cable roof system is essential in a design process and the shape of roof is changed by pretension. The nonlinear behavior of flexible cable system has greatly an affect on the sag and pretension. This paper will be carried out analyzing and comparing the tensile forces and deflection of a cable spoke wheel system for the large span retractable roof, and analyzed to deflections and tensile forces by the post height of center hub. The double arrangement of a spoke wheel system with reverse curvature works more effectively as a load bearing system, the pretension can easily increase the structural stiffness. The cable truss system can carry vertical load in up and downward direction, and act effectively as load bearing elements.

3축 위성체의 준최소시간 선회기동을 위한 입력형상최적화 (Torque shaping for near-minimum-time optimal slewing of 3-axis spacecraft)

  • 김기석;김희섭;김유단
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
    • /
    • pp.1330-1333
    • /
    • 1997
  • In this paper, the optimal torque shaping is obtained for 3-axis rotation of a spacecraft. The true optimal 3-axis rotation of rigid spaeraft is first investigated via parameter optimization method with prescribed switching times. Input torque shape of the troque generating device mounted on the central hub is optimized using fourier Series expansion so that the spacecraft may slew while minimizing the vibration energy of flexible modes. Numerical results show that proposed method suggests a reference trahectory for open-loop control, and also verify that it can minimize the vibratory modes of the spacecraft during/after the rest-to-rest maneuver.

  • PDF

집중질량과 초기 비틀림각을 갖는 회전블레이드의 진동해석 (Vibration analysis of a pretwisted rotating blade with a concentrated mass)

  • 곽주영;유홍희
    • 대한기계학회논문집A
    • /
    • 제22권1호
    • /
    • pp.190-197
    • /
    • 1998
  • Equations of motions of a pretwisted rotating blade with a concentrated mass in an arbitrary position are derived. The flapwise and chordwise equations are coupled to each other due to the pretwist angle of the blade. As the angular speed, hub radius ratio, pretwist angle and concentrated mass vary, the vibration characteristics of the blade change. It is found that eigenvalue lociveering phenomena occur between two closing loci due to the pretwist angle. The effect of the pretwist angle on the critical angular speed and location of the concentrated mass on the natural frequencies are also investigated.