• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.5
• /
• pp.686-693
• /
• 2001

In this paper, a new carrier complex power series which represents nonlinear transfer function of high power amplifier is derived. Using this transfer function, the nonlinear transfer function of predistortive circuit for linearizing the distortion effect of a HPA(High Power Amplifier) is derived and fabricated. A measured gain and $P_{1dB}$ of the fabricated HPA in IMT-2000 basestation transmitting band are 34.06 dB and 35.4 dBm. The predistortive circuit using inverse carrier complex power series is fabricated and operated with HPA. The predistortive HPA improves C/I(Carrier to Intermodulation) ratio of HPA by 17.01 dB(@Pout=25.43 dBm/tone) with 2-tone at 2.1375 GHz and 2.1425 GHz.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.10
• /
• pp.613-615
• /
• 2014

The design and implementation of a broadband and linear HPA(High Power Amplifier) for TVWS are presented in this paper. The spectrum mask and transmitted power of HPA for TVWS must be controlled and meet the regulations to minimize interference effects on present broadcasting systems. The implemented HPA has the operating frequency of 460 ~ 698MHz with $24.7{\pm}1dB$ gain, input reflection coefficient of below -25dB, output reflection coefficient of below -7.28dB and the linearity of -57.7dBc at 22.2dBm output power.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.2
• /
• pp.489-497
• /
• 2011

The proposed method for an effective assay of Cd, Cr and Pb in several polymer samples has been validated. The determination was carried out using ICP-OES after a high pressure asher (HPA) digestion at pressure and temperatures up to 13 MPa and $320^{\circ}C$, respectively. Polymer based materials were totally oxidized with nitric acid in a HPA chamber and determined by ICP-OES. Validation parameters such as linearity, matrix effect, limit of dectection (LOD), limit of quantitation (LOQ), accuracy and precision (repeatibility, intermediate precision and reproducibility) were assessed. The LOD and LOQ in the sample were ranged from 0.98 to 1.18 mg $kg^{-1}$ and 2.93 to 3.55 mg $kg^{-1}$, respectively, relying on the analyte. The proposed method had a good accuracy and precision for repeatability, intermediate precision with respect to days and analysts and reproducibility expressed as inter-laboratory study. The developed method was simple to use, suitable and applicable to various kinds of polymers.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.12
• /
• pp.1707-1714
• /
• 2016

This paper presents the effect of spectrum sharing/overlapping in a heterogeneous OFDM system with nonlinear High Power Amplifier (HPA). According to the spectrum sharing strategies, the achievable rate performances are analyzed. In the non-orthogonal spectrum sharing, we address how the portion of the overlapped or overlaid spectrum band and the nonlinear properties of HPA affect the system performance and accordingly, propose the optimized spectrum sharing strategies.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.4
• /
• pp.696-705
• /
• 1997

This paper presents an efficient adaptive predistortion technique compensating linear and nonlinear distortions caused by high-power amplifier (HPA) with memory in OFDM systems. The efficient adaptive data predistortion techniques proposed for compensation of HPA with memory in single carrier systems cannot be applied to OFDM systems since the possible input levels for HPA is infinite in OFDM systems. Also, previous adaptive predistortion techniques, based on Volterra series modeling, are not suitable for real-time implementation due to high computational burden and slow convergence rate. In the proposed approach, the memoryless HPA preceded by a linear filter in OFDM systems is modeled by the Wiener system which is then precompensated by the proposed adaptive predistorter with a minimum number of filter taps. An adaptive algorithm for adjusting the proposed adaptive predistorter is derived using the stochastic gradient method. It is demonstrated by computer simulation that the performance of OFDM system suffering from nonlinear distortion can be greatly improved by the proposed efficient adaptive predistorter using a small number of filter taps.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.6
• /
• pp.3-14
• /
• 2016

Recently, researches for new waveforms have been carried in order to satisfy KPI for 5G mobile communication system. UFMC and FBMC are well known as ways to reduce OOB power. In this paper, we analyze spectrum of OFDM, UFMC, and FBMC system under nonlinear HPA environment. And then we evaluate and analyze performance of these systems under the same environment. As simulation results, OOB power of OFDM, UFMC, and FBMC increases with HPA nonlinearity increasement. Especially, OOB power of FBMC is the largest increase due to HPA nonlinearity. Also, BER performance of these systems is degraded by increasement of HPA nonlinearity. Therefore, In this paper, we can confirm that a system with low-complexity and high-speed processing is advantageous, because BER performance and OOB power characteristic of these systems are degraded to similar level, when these systems are implemented in real world.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.3
• /
• pp.492-498
• /
• 2000

When multi-carriers are applied to the high power amplifier(HPA) having nonlinear characteristics, the HPA output has unwanted IMD signals. The IMD signal is noise in the HPA. The magnitude and phase of the main and IMD signal of HPA output are changed as the input signal power is changed. If we know exactly the magnitude and phase characteristics of the main and IMD signal, we can design a more adequate linearizer and understand the characteristics of transistor. In this paper the magnitude and phase of the main and IMD signal of HPA output are measured and analyzed for variation of the input power.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2003.05a
• /
• pp.283-286
• /
• 2003

Generally, the repeater in CDMA(Code Division Multiple Access) included HPA(HI-Power Amplifier) to amplifier communication signals. Also, HPA contained PD(Predistortor) to maintain the linearization of amplifier characteristics A configuration component of PD have been used electricity nonlinear devices such that diode. But this diode takes many influences at the circumstance temperature. Consequently, st can't maintain output linearization, and drop the communication Duality. The manufacturer set bias of the circuit to the manual at the first out of ware-house low. But the Q-point changes according to the change of the high temperature or low temperature. Therefore, we designed a system to maintain the Q-point by FDM(Fuzzy Decision Maker) in this paper.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.173-174
• /
• 2006

High power amplifier (HPA), which is used in transmitter of wireless communication systems, usually works in near saturation point in order to achieve maximum efficiency. In this region, HPA can introduce undesirable nonlinear effects. In this paper, we present a polynomial modeling method for efficient techniques to compensate for nonlinear distortion introduced by nonlinear HPA. Proposed polynomial predistorter inverses actual amplifier. Namely, we derive polynomials of amplifiers from analytical method and the electrical parameters in the data sheet of an actual amplifier and then can derive polynomial predistorter by inversing them. It is an effective and a simple method to compensate nonlinear distortion. SSPA(Solid-state power amplifier) is considered. We also analyze the effects of predistortion on the SER performance of communication system with 16-QAM modulation format. The results have shown the efficiency of this model.

• The Journal of the Korea Contents Association
• /
• v.5 no.1
• /
• pp.201-208
• /
• 2005

Tn this paper, we evaluate the peak-to-average power ratio (PAPR) performance in a space-time block code (STBC) multi-input multi-output orthogonal frequency division multiplexing (MIMO-OFDM) system using selected mapping (SLM) and partial transmit sequences (PTS) approaches. SLM and PTS methods are used to decrease the nonlinear distortion and to improve the power efficiency of the nonlinear high power amplifier(HPA) in the MIMO-OFDM system. In simulation result, when compared with the existing MIMO-OFDM system using QPSK, the PTS method reduces the PAPR about 5dB while the SLM method can reduce about 3.5 dB. Also, we find the BER performance of the MIMO-OFDM system with and without the predistorter in front of the HPA. When the predistorter is used, the input back-off (IBO) of 4 dB is required in the PTS method, and IBO of 6 dB in the SLM method to closely conform to the linear amplifier. If the method of improving the PAPR is not used, the value of IBO of 8 dB is required.