• Journal of the Society of Disaster Information
• /
• v.12 no.1
• /
• pp.89-97
• /
• 2016

According to the statistics released by Ministry of Public Safety and Security, the number of restaurant fires in Korea reached around 2,400 and 169 damages of human life and damages to property was approximately over $8.8 billion for recent 3 years. It could be desirable having automatic commercial fire-extinguishing equipment at commercial facilities excluding housing facilities for the safety, applying at the place first where it has been more risky and expected fire can be occurred relatively because economical burden can be accelerated. In order to do this, adjust its level to meet the same level of the kitchen for 'Specific Target for Fire Fighting' that "gas leak alarm" has be equipped relevant regulations and it is considered and reasonable to expand the limit of application gradually.

• Journal of Internet Computing and Services
• /
• v.17 no.4
• /
• pp.87-93
• /
• 2016

Since aging population in Korea is rapidly progressing, the need for improving the life quality of the elderly has been increasing. Accordingly, in order to respond in a residential environment improvement and behavior change for the elderly, architecture design and construction methods have become converted into a modular construction method and various IT systems for the elderly have been proposed. Unlike current residential design techniques for the elderly in which architectural design techniques are performed separately with IT system design, the methodology for converging architectural design techniques with IT has not been discussed and proposed. Therefore, this paper extensively studies about requirements for converging architectural design techniques with IT such as elderly behavior, residential IT Service plan factor analysis, and residential modular construction method including IT services.

• Journal of Animal Science and Technology
• /
• v.50 no.6
• /
• pp.793-798
• /
• 2008

The semen collection process in the porcine is far from being a sterile procedure. Consequently, porcine ejaculates commonly contain bacterial contaminants. The aim of this study is to identify the bacteria in porcine semen and to find the antibiotics resistance of bacteria. Twelve porcine originating from four AI center were used to collect semen. Bacteria were identified by automated instrument for rapid organism identification system and bacterial sensitivities of 8 antibiotics were tested. The Bacterial contaminants of Staphylococcus genus(37.8%), Proteus genus(7.0%), Bacillus genus (6.1%), Pasteulla genus(5.7%), Acinetobacte genus(5.2%), Serratia genus(4.3%) and others(33.9%) were frequently isolated. However, amikacin showed higher antibiotic sensitivity than other antibiotics. General sanitation protocols can contribute partly to inhibit the bacterial contamination, with monitoring boar housing, semen collection areas and the extended semen. But, proper selection of preservative antibiotics by microbial sensitivities can minimize the influence of bacteria.

• Journal of Korea Society of Industrial Information Systems
• /
• v.4 no.4
• /
• pp.7-14
• /
• 1999

The measuring systems of auto-parts are most of greater part very expensive. This paper tries to study to make a low-cost measuring equipment there's several kinds of parts in automobile. In this study, we take aircon-switch called magnet coil-housing as the object of measurements. The measurements of this product is currently in difficult situations at factory. In the case of the mesuring objects being big sizes and camera sensor having under 410000 pixels, the key point is the number of pixels not to be changed whenever the same object is measured under the same position. We modified and used fuzzy c-means algorithm to get mostly without the change of the numbers of pixels exactly. Also, the standardized ruler is necessary to measure the length of the object but it is not easy to get the precised ruler. Therefore, the standard length has been taken as the mean value of the pixels in the previous passed objects manually obtained at factory. The results are displayed on monitor and transferred these signals to the microprocessor through RSC-232 port to determine a good or bad of products.

• Journal of Korean Society of Transportation
• /
• v.27 no.3
• /
• pp.29-38
• /
• 2009

In Korea, large.scale housing complexes and residential areas began to appear in urban regions through urban plan projects from the 1970s. In addition, with the increase in the percentage of apartments in developed areas, road traffic noise at roadside apartments was raised as a new problem. Furthermore, since the late 1980s, apartments, which had been no taller than 15 stories, have grown higher to 20-30 stories and recently 40.story or higher apartments are being constructed, and as a result, residences are growing denser and road traffic noise is increasing in urban areas. Thus, the present study made a noise map using variables 'traffic volume' and 'mean spot speed' among factors influencing roadside apartments, and examined the noise reduction efficiency of the variables. According to the results, traffic volume and speed limit were found to have an effect on a limited space, and the median bus lane system was found to have a slight effect on the roadside.

• Journal of Korean Society of Transportation
• /
• v.34 no.6
• /
• pp.510-522
• /
• 2016

In studies involving public transport, social welfare improvement is simply explained by the increase in public transport demand. However, the increase in the demand for public transport is mostly observed by the change in the frequency of public transport service, and in-vehicle crowding in public transport has not been an object of concern. This study examines and tries to reveal the cause of the changes of the social welfare and in-vehicle crowding of the changing public transport from imposing congestion pricing. We observe that congestion pricing increases in-vehicle crowding in public transport. This predictable phenomenon is more exacerbated in case of not operating bus-only lane. It should be noted that in-vehicle crowding is more increased in suburban, but in First-best toll system it tends to get worse less than it in other congestion pricing systems. We identify that the change of in-vehicle crowding is affected by the change of proximity of the housing to workplace, the number of commuting trips, and unpredictable distortion effect of the congestion charge.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1255-1255
• /
• 2001

The study used 356 veal calf meat samples received from Finland (n=16), France (n=109), Italy (n=81) and The Netherlands (n=150). Calves were raised under experimental protocols that compared feeding and housing practices normally used in each county to treatments aiming at improving animal welfare. Samples were taken at the $8^{th}$ rib of Longissimus thoracis muscle 24h after slaughter, They were kept refrigerated ( $2-4^{\circ}C$) under vacuum package for 6d and then frozen ($-20^{\circ}C$) until meat quality evaluation. Measurements included pH, color (Hunter Lab system), shear force, chemical composition (DM, Ash, Ether Extract, collagen and haematin content), weight and area cooking losses and a sensory evaluation by a group of panelists. A sample of meat was ground with a blade mill and scanned in duplicate between 1100 and 1498 nm (FOSS NIR Systems 5000). WinISI software was used to develop a discriminating equation using NIR spectra (SNV-detrend, derivative=1, gap=4nm, smooth=4nm). The Proc ANOVA and DISCRIM of SAS were used for all the laboratory determinations. County of production had a significant (P<0.01) effect on all the parameters. However, discriminant analysis using any or few laboratory parameters resulted in great errors of county classification. A more accurate (98.8%) classification was obtained only when using all the laboratory parameters. NIRS classified correctly 354 of the 356 samples (99.4%). Provided with a larger data set, NIRS could be used to identify country of production of veal meat.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 1999.12a
• /
• pp.315-323
• /
• 1999

The measuring systems of auto-parts are most of greater part very expensive. This paper tries to study to make a low-cost measuring equipment. There's several kinds of parts in automobile. In this study, we take aircon-switch called magnet coil-housing as the object of measurements. The measurements of this product is currently in difficult situations at factory. In the case of the mesuring objects being big sizes and camera sensor having under 410000 pixels, the key point is the number of pixels not to be changed whenever the same object is measured under the same position. We modified and used fuzzy c-means algorithm to get mostly without the change of the numbers of pixels exactly. Also, the standardized ruler is necessary to measure the length of the object but it is not easy to get the precised ruler. Therefore, the standard length has been taken as the mean value of the pixels in the previous passed objects manually obtained at factory. The results are displayed on monitor and transferred these signals to the microprocessor through RSC-232 port to determine a good or bad of products.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.2
• /
• pp.955-961
• /
• 2013

This study aimed for the scientific approach of Korean traditional house, so called Hanok, by analyses of structural elements and thermal environmental performance. Hanok is a very unique vernacular architectural style of the Middle East Asia that fits with climate conditions of the Korean Peninsular, designed to withstand high temperature and humidity in summer and cold and dry in winter seasons. In order to evaluate thermal environment of Hanok, its sectional structure such as floor, wall, roof structure and Ondol which is Korean traditional floor heating system, was built in 3D, as well as heat transfer mechanism of its composing elements was analyzed through 3 dimensional steady state analysis. The results of the thermal environmental performance of Hanok will be used as a basic datum of design guidelines for accomplishing ecologic housing fitted with local climate.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.2
• /
• pp.281-290
• /
• 1999

This paper presents the development of a high power amplifier for a transmitter of INMARSAT-C operating at L-band(1626.5∼1646.5 MHz). To simplify the fabrication process, the whole system is designed of two parts composed of a driving amplifier and a high power amplifier The HP's AT-41486 is used for driving part and the SGS-THOMSON microelectronics' STM1645 is used the high power amplifier. The SSPA(Solid State Power Amplifier) was fabricated by the both circuits of RF and temperature compensation in aluminum housing. The realized SSPA has more than 36 dB for small signal within 20MHz bandwidth, and the voltage standing wave ratios(VSWR) of input and output Port are less than 1.5:1, respectively. The output Power of 42.2 dBm is achieved at the 1636.5 MHz. These results reveal a high power amplifier of 20 Watt which is the design target.