• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 1999년도 춘계학술발표회 초록집
• /
• pp.81-81
• /
• 1999

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1996년도 재료학회 춘계학술발표회
• /
• pp.94-95
• /
• 1996

• 한국전기화학회:학술대회논문집
• /
• 한국전기화학회 2001년도 추계총회 및 학술발표회
• /
• pp.21-21
• /
• 2001

• Journal of Welding and Joining
• /
• 제31권5호
• /
• pp.47-53
• /
• 2013

We have investigated the traits of clad metals in hot-rolled clad steel plates, including the sensitization and mechanical properties of STS 316 steel plate and carbon steel (A516), under various specific circumstances regarding post heat treatment, multilayered welds, and thick or repeated welds for repair. For evaluations, sectioned weldments and external surfaces were investigated to reveal the degree of sensitization by micro vickers hardness, tensile, and etching tests the results were compared with those of EPR tests. The clad steel plates were butt-welded using FCAW and SAW with the time of heat treatment as the variable, a that was conducted at $625^{\circ}C$, for 80, 160, 320, 640, and 1280 min. Then, the change in corrosion resistance was evaluated in these specimens. With carbon steel (A516), as the heat treatment time increased, the annealing effect caused the tensile strength to decrease. The micro-hardness gradually increased and decreased after 640 min. The elongation and contraction of the area also increased gradually. The oxalic acid etch test and EPR test on STS316 and the clad metal showed STEP structure and no sensitization. From the test results on multi-layered and repair welds, it could be concluded that there is no effect on the corrosion resistance of clad metals. The purpose of this study was to suggest some considerations for developing on-site techniques to evaluate the sensitization of stainless steels.

• 대한산업공학회지
• /
• 제25권4호
• /
• pp.476-489
• /
• 1999

This paper is concerned with the deployment of core technologies for automotive steel sheets, based on the structural change of global market. The main tasks of automotive industry are to ensure the energy consumption, environmental regulations, and driving safety. With social and legal requirements, this study analyzes the market creation processes with technological innovations for hot rolled, cold rolled and galvanized steel sheets during the 20th century. It has been proven that the leading country in the steel industry was also that in the automotive. The purchaser-supplier relations of sheet materials are then patternized in the regional markets of the United States and Japan, who share nearly 50% of market in the world. According to the paradigm shift of globalization, the balance of power in Porter's 5 forces has been moved to the buyers', and both industries pursue Win-Win strategies such as the PNGV(Partnership for a New Generation of Vehicles ) and design-in system with the competition.

• 소성∙가공
• /
• 제7권2호
• /
• pp.150-157
• /
• 1998

Recently the SPPC technology is being developed in steel rolling industries for the purpose of enhancing mechanical properties of rolled sheets. The technology is to produce steel sheets with finer and more uniformly distributed grains by prediction of recrystallization behaviors and on-line control of rolling parameters during hot rolling process. In this study a finish rolling process was analyzed by a three-dimensional rigid-thermoviscoplastic finite element method and recrystallization behaviors of several locations in the sheet were predicted by Sellars equations. As a result it was found that the initial grain size of 84 ${\mu}m$ became $21-23\;{\mu}m\;20-22{\mu}m\;and\;18-20{\mu}m$ at front middle and end portions of the sheet respectively. It was also found that variations of the grain size became $$0.6{\sim}2{\mu}m\;and\;10{\mu}\mum$$ in thickness and width directions respectively.

• 소성∙가공
• /
• 제9권1호
• /
• pp.66-71
• /
• 2000

The present study tackles the metallurgical subjects involving the thin slab-direct hot rolling process, i.e. mini-mill process. In order to clarify the effect of chemical composition of steel and MnS precipitation behaviors on the development of edge cracking during hot rolling, the content of manganese and sulfur in low carbon steel was varied and the isothermal treatment prior to roughing was applied. Edge cracking during roughing in the hot-rolling process of mini-mill was effectively prevented by means of the isothermal treatment at 115$0^{\circ}C$ for 5 minutes in the 0.4% manganese steel containing sulfur lower than 0.013%. With the increase in manganese content in low carbon steel, coarser MnS developed. The edge cracking index which denotes the total length of edge crack per unit edge-length of rolled specimens was proposed in this paper. It was found that the edge cracking index linearly decreased with the increase in the ratio of MnS.

• Steel and Composite Structures
• /
• 제12권1호
• /
• pp.31-51
• /
• 2012

Local buckling can be ignored for hot-rolled ordinary strength steel equal angle compression members, because the width-to-thickness ratios of the leg don't exceed the limit value. With the development of steel structures, Q420 high strength steel angles with the nominal yield strength of 420 MPa have begun to be widely used in China. Because of the high strength, the limit value of the width-to-thickness ratio becomes smaller than that of ordinary steel strength, which causes that the width-to-thickness ratios of some hot-rolled steel angle sections exceed the limit value. Consequently, local buckling must be considered for 420 MPa steel equal angles under axial compression. The existing research on the local buckling of high strength steel members under axial compression is briefly summarized, and it shows that there is lack of study on the local buckling of high strength steel equal angles under axial compression. Aiming at the local buckling of high strength steel angles, this paper conducts an axial compression experiment of 420MPa high strength steel equal angles, including 15 stub columns. The test results are compared with the corresponding design methods in ANSI/AISC 360-05 and Eurocode 3. Then a finite element model is developed to analyze the local buckling behavior of high strength steel equal angles under axial compression, and validated by the test results. Following the validation, a finite element parametric study is conducted to study the influences of a range of parameters, and the analysis results are compared with the design strengths by ANSI/AISC 360-05 and Eurocode 3.

• 한국강구조학회 논문집
• /
• 제17권5호통권78호
• /
• pp.637-648
• /
• 2005

선행하중을 도입한 H형강의 상하부에 고강도 강판을 부착시키고 하중을 제거함으로써 프리스트레스의 도입효과를 극대화 시킨 플레이트거더(High Prestressed Plate Girder, 이하 HiPP 거더)를 개발하고자 한다. 먼저 복합거더(hybrid girder)의 일종인 HiPP 거더의 역학적 원리를 간략히 설명하고, 실험을 통하여 플레이트거더에 의도한 프리스트레스를 도입하기 위한 제작공정을 개발한다. 또한 실험체의 변형률 계측결과와 이론해석 결과를 비교하여 HiPP 거더의 프리스트레스 도입 메카니즘을 확인하며, 단계별 거더에 발생하는 응력을 파악한다. 가교에 적용하기 위하여 HiPP 거더의 설계를 위한 허용휨응력(안)과 용접부의 응력검토 결과를 제시한다. 결론적으로 단순 합성거더와 비교하여 HiPP 거더는 프리스트레스의 도입효과 때문에 장지간화된 가교의 설계/시공을 가능케 하는 구조적 거동 특성을 보인다.

• 한국자기학회지
• /
• 제11권1호
• /
• pp.1-7
• /
• 2001

열연판을 모재로 하여 압연 및 열처리 공정을 조합한 공정을 3회 냉간압연법을 사용하여 최종두께 100$\mu\textrm{m}$로 제작한 방향성 규소강대에 대하여, 직류자기 특성 및 결정입자의 열처리 의존성, 결정방위 등을 조사하였다. 그 결과, (110)면이 거의 시료 전체표면에 성장하는 것이 관측되었으며, B$_{8}$은 1.9 T정도, 평균$\alpha$각은 약 4.6$^{\circ}$이었다. 향후 약간의 (001)조직의 집적도 개선이 추가된다면, 염가의 열연판을 모재로 사용하여 기존의 방향성 규소강판의 경우보다 훨씬 제조공정수를 단순화함으로써, 경제성이 우수한 방향성 극박 규소강대를 제작할 수 있는 가능성을 확인하였다.