• Journal of Biosystems Engineering
• /
• v.25 no.3
• /
• pp.227-232
• /
• 2000

A natural air in-bin grain dryer with a grain circulator was developed for on farm use. Natural air drying test for rough rice was carried out to evaluate drying rate, uniformity of moisture content distribution in grain bed and energy consumption. It took 10 days to dry 8 ton of paddy rice from 21.9%(w.b) of moisture contents to 16.7%(w.b), by prototype dryer and the average drying rate was 0.52%/day. The uniformity of moisture content after drying was superior to a conventional natural air dryer in which grains were not mixed during drying periods. The dryer performance evaluation index was 738.3kJ/(kg.water), which was more effective than that of grain circulation type hot air dryer(3,500∼5,000 kJ/kg.water)

• Food Science and Preservation
• /
• v.22 no.6
• /
• pp.915-919
• /
• 2015

This study was performed in order to provide basic data for predicting the usefulness of Jicama (Pachyrhizus erosus) as a food raw material. The changes in the physicochemical properties of freeze-dried and hot air-dried Jicama were investigated and analyzed. The moisture content of raw Jicama was 81.84%. The crude protein, crude fat, crude ash and carbohydrate content of hot air-dried Jicama powder were 2.85, 0.79, 7.93 and 88.44%, while those of freeze-dried Jicama powder were 3.93, 0.83, 7.92 and 87.32%, respectively on dry basis. Regarding the color values, the lightness of freeze-dried Jicama (92.86) was higher than that of the hot air-dried Jicama (88.01), whereas the redness (-0.67) and yellowness (3.21) of freeze-dried Jicama were lower than those of the hot air-dried Jicama (0.43) and (11.96), respectively. The brown index was lower in the freeze-dried Jicama (0.029) than in hot air-dried Jicama (0.107). The total sugar content showed no significant differences between freeze (46.49 mg/g) and hot air-dried Jicama (45.11 mg/g). Finally, the amylose content was higher in freeze-dried Jicama (5.66%) than in hot air-dried Jicama (6.63%).

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.2
• /
• pp.305-314
• /
• 2017

The purpose of this study was to develop the high efficiency of ginseng by using microwave low temperature vacuum drying technology. In red ginseng manufacturing processes, the study results compared the hot-air drying red ginseng dried during 24hours in $60-70^{\circ}C$ and redried during 72hours in $40^{\circ}C$ after the steaming ginseng with the red ginseng dried in microwave low temperature vacuum dryer on condition that 900 watt, 2.45 MHz, 50 mmHg during 5 hours and redried during 2 hours on 750 mmHg after the steaming ginseng about observation of tissue, sensory evaluation and a change of ginsenoside and crude saponin content. As a result, the red ginseng in microwave low temperature vacuum was had high brightness, the surface turned into porosity tissue and added more flavor, decreased bitterness highly on the contrary increased sweetness at the same time that elevated the comprehensive preference. Moreover, In a short time, the content of ginsenosides $Rg_1$ and $Rb_1$ increased about sixfold, eightfold in one time zone but there were no wide difference in content of $Rg_3$ as compared to the hot-air drying red ginseng. Finally, content of crude saponin was increased widely at 10-20 minutes and stayed high crude saponin content consistently. Therefore, this result indicated that the red ginseng in microwave low temperature vacuum increased extraction yields of the ginsenosides and crude saponin through a change of porosity tissue and improved flavor and texture compare with the general hot air dried red ginseng in a short time. According to these results, that provided that could increase the preference about red ginseng.

• Korean Journal of Food Science and Technology
• /
• v.9 no.4
• /
• pp.245-250
• /
• 1977

Experiment were conducted to find out the effective drying method of citrus peel produced in Korea by varying the temperature of hot air, surface area of peels, peels from several citrus varieties and physicochemical treatment of the peel. 1. About $3{\sim}6\;days$ were required to reduce the moisture level of the peel from 70%(wet basis) to 20% at room temperature without forced convection. 2. Drying was speeded up until the temperature of hot air reached $60^{\circ}C$. Beyond that no significant increase in drying rate was observed. About 50 minutes were needed to reduce the moisture level (dry basis) to below 10% at $60^{\circ}C$ by forced convection 3. When the peel surface area was increased twice by cutting the peel into 256 fractions, the overall drying time (the time required to reduce the moisture level to 10%, dry basis) was shortened to 15 minutes from 50 mintes of the original peel. 4. No significant difference in drying rate was observed among the peels from several citrus varieties except Shaddock jabon and Citrus ponki tanaka, which dried more slowly than others. 5. Treatment of $Ca(OH)_2$ and the pressing of the peel before drying were effective in drying only when the initial moisture content was substantially higher.

• 한국전산유체공학회:학술대회논문집
• /
• 2010.05a
• /
• pp.99-102
• /
• 2010

In the present study, a three-dimensional numerical simulation was performed in a paint drying system of vehicle assembly line. In the drying system hot air and cool air are blown in turn from the nozzles to dry the trim of vehicle. Inlet boundary condition using user subroutine code is adopted to consider the moving motion of the vehicle. The present paper aims to improve the performance of the drying system. The transient distribution of temperature and velocity at the surface of the vehicle were predicted numerically. From these results, optimal operating condition of the drying system are to be suggested.

• Journal of Korean Physical Therapy Science
• /
• v.1 no.1
• /
• pp.187-194
• /
• 1994

The Han Zeong Mag was the typical hydro-therapy of Korea. It looks like hot air bath of western physical therapy. It developed out of the CHO-SEON, King SE JONG(1422). It is warmed fire of pine wood in the room. At first, it runs a temperature about a few hundred and drop to $80^{\circ}C$ through 12 hours then the room air is exceeding dry. After 12h. reheated in the room. Women makes use of that place with bare body. Because for use salt rub of skin. They have low back pain, pain of muscle, muscle spasm, swelling of arthritis, stiffness of joint and it takes effect on the cosmetic of skin. The treatment effect was excellent to pain(28%), next arthritis(25%). But they have not order for treatment of a doctor. It's dangers of heat stroke and heart disease. Imtortant, must educated method of it's use and danger when it's bad use.

• Korean Journal of Medicinal Crop Science
• /
• v.22 no.4
• /
• pp.255-261
• /
• 2014

Cosmetic activities of the leaves of Curcuma longa L. were compared according to different drying methods, to expand the use of the by-products of Curcuma longa L. The highest extraction yield of 29.4% was obtained from vacuum drying process (VD), whose value was very close to 29.2% from freeze drying process (FD). Relatively lower extraction yield were observed as 24.5% and 25.3% from the raw leaf (RL) as control and hot air drying process (HD). The cytotoxicity was observed lower FD and VD than RL and HD. It shows that cytotoxicity was closely related to cosmetic activities such as tyrosinase and melanin inhibition activities by showing much better cosmetic activities of the extracts from both FD and VD than those from the RL and HD. It was interesting that was differences of the cosmetic activities and cytotoxicity between FD and VD, which implies that VD method should be a more efficient process than FD method in terms of drying time and operation costs: 6 hours vs 24 hours and 3-5 times higher extraction costs in drying. It was observed that VD is more excellent dry method than others. This result could be utilized to effectively dry other soft plant biomass.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.6
• /
• pp.505-511
• /
• 2014

In this paper, silver pastes were printed on polyethylene terephthalate (PET) film using screen printing and evaluated the drying characteristics by using dry oven and NIR drying system. The printed Ag films were dried at $140^{\circ}C$ and the drying time was changed from 10 to 90 seconds. To evaluate the electrical properties of printed Ag film, sheet resistance was compared. The sheet resistance of the dried thin silver film by using NIR drying system more rapidly decreased. To clarify this phenomena, the morphology and component of the dried surfaces were measured by using the scanning electron microscope (SEM) and the energy dispersive X-ray Spectroscopy (EDX), respectively. In the EDX measurement results, the oxidation of the surface was observed in the dried thin film by using the dry oven. The NIR drying system is more applicable than conventional hot air drying to apply continuous printing system.

• Journal of Environmental Science International
• /
• v.21 no.12
• /
• pp.1511-1521
• /
• 2012

An attempt is made to analyse characteristic features of heavy rainfalls which occur at the metropolitan area of the Korean peninsular the on- and off- Changma season. For this, two representative heavy rainfall episodes are selected; one is the on-Changma season wherein a torrential rain episode happened at Goyang city on 12 July 2006, and the other is the off-Changma season, a heavy rainfall event in Seoul on 21 September 2006. Both recorded considerable amounts of precipitation, over 250mm in a half-day, which greatly exceeded the amount expected by numerical prediction models at those times, and caused great damage to property and life in the affected area. Similarities in the characteristics of both episodes were shown by; the location of upper-level jet streak and divergence fields of the upper wind over heavy rainfall areas, significantly high equivalent potential temperatures in the low atmospheric layer due to the entrainment of hot and humid air by the low-level jet, and the existence of very dry air and cold air pool in the middle layer of the atmosphere at the peak time of the rainfall events. Among them, differences in dynamic features of the low-level jet and the position of rainfall area along the low-level jet are remarkable.

• Journal of Power System Engineering
• /
• v.21 no.4
• /
• pp.62-69
• /
• 2017

Because the moist foods like anchovy were appeared lower quality by hot air that occurred the lipid oxidation, the drying system by using the cold air has been used widely. This study has been carried out on the performance improvement according to arrangement angle of baffle and location of air duct in the cold air dryer. The main parameters in this study are the arrangement angles which are without, $0^{\circ}$, $10^{\circ}$, $20^{\circ}$, $30^{\circ}$ and $40^{\circ}$, and the locations of air duct are without, front, center and back. For this study we have conducted the numerical analysis method using fluent in order to obtain the optimal condition of the drying performance. As the arrangement angle of baffle is increased, the relative humidity is proportionally decreased, the value at $40^{\circ}$ is 42.2% that indicate the reduction of about 4% than without it. After the air duct was installed, the decreased relative humidity is showed within 1%, therefore, the effect of air duct for improving the dry capacity is more large than the arrangement angle of baffle. Finally, we have obtained the optimal conditions that the arrangement angle is $40^{\circ}$ with the air duct for a cold air dryer.