• Journal of Energy Engineering
• /
• v.20 no.1
• /
• pp.13-20
• /
• 2011

The high fuel flexibility of Micro Gas Turbine(MGT) has boosted their use in a wide variety of applications. Recently, the demand for biogas generated from the digestion of organic wastes and landfill as a fuel for gas turbines has increased. We researched the influence of firing landfill gas(LFG) on the performance and operating characteristics of a micro gas turbine combined heat and power system. $CH_4$ and $CO_2$ simultaneous recovery process has been developed for field plant scale to provide an isothermal, low operating cost method for carrying out the contaminants removal in Land Fill Gas(LFG) by liquid phase catalyst for introduce into the green house for the purpose of $CO_2$ rich cultivation of the plants. Methane purification and carbon dioxide stripping by muti panel autocirculation bubble lift column reactor utilizing Fe-EDTA was conducted for evaluate optimum conditions for land fill gas. Based on inflow rate of LFG as 0.207 $m^3$/min, 5.5 kg/$cm^2$, we designed reactor system for 70% $CH_4$ and 27% $CO_2$ gas introduce into MGT system with $H_2S$ 99% removal efficiency. A green house designed for four different carbon dioxide concentration from ambient air to 1500 ppm by utilizing the exhaust gas and hot water from MGT system.

• Clean Technology
• /
• v.22 no.3
• /
• pp.190-195
• /
• 2016

The thermal decomposition of waste energetic materials such as TNT, RDX and composition B in a commercial rotary kiln has previously been carried out. As part of the demilitarization process, the thermal decomposition of homogeneous double base propellant (DB) used in M8 and consisting predominantly of nitrocellulose and nitroglycerine is examined with respect to a number of operating conditions. A single condensed phase reaction with 4 species and 365 gas phase reactions and 59 species are considered. Simulation results show the sensitivity of the thermal decomposition of DB with temperature and velocity. At relatively low velocity with constant inlet hot air temperature, temperature in the rotary kiln was found to be highest, 953 K and 1300 K for cases 3 and 6 respectively. Illustrating that optimum operating temperature can be achieved by controlling the inlet velocity without additional cooling systems.

• Journal of the East Asian Society of Dietary Life
• /
• v.25 no.5
• /
• pp.887-892
• /
• 2015

Jerusalem artichoke is often stored poorly after harvesting due to its delicate skin. For this reason, Jerusalem artichoke is mainly distributed in the market as a dried material. In order to improve utilization of dried Jerusalem artichoke, we made Jangachi and analyzed physiochemical characteristics with raw Jerusalem artichoke Jangachi during storage. Raw Jerusalem artichoke was sliced into 7 and 10 mm slices and dried in hot air. After aging, we analyzed rehydration capacity, pH, hardness, salinity, sugar content, and fructan content of both. Dried Jerusalem artichoke sliced into 10 mm slices took over twice as long (420 min) to be rehydrated over 90% than 7 mm sliced (200 min) Jerusalem artichoke. In the case of raw Jerusalem artichoke, hardness showed a tendency to decline. Relatively, hardness of dried Jerusalem artichoke was measured consistently. After 4 weeks, salinity and sugar content were 3.63% and $41.23^{\circ}Brix$ in raw Jerusalem artichoke Jangachi, 3.47% and $37.05^{\circ}Brix$ in 7 mm dried Jerusalem artichoke, and 3.77% and $39.15^{\circ}Brix$ in 10 mm dried sample, respectively. As a result of this study, the possibility of dried Jerusalem artichoke as a pickle was confirmed.

• Journal of Applied Biological Chemistry
• /
• v.57 no.4
• /
• pp.325-329
• /
• 2014

To maintain the quality of sweet persimmon during storage, the samples were treated with a combination of 50 ppm $ClO_2$ and 0.1% fumaric acid after harvest, packaged with low density polyethylene film, and stored at $1{\pm}1^{\circ}C$ for 35 days. The combined treatment reduced the populations of total aerobic bacteria, yeast and molds by 1.82 and 2.07 log CFU/g, respectively, compared to the control. During storage, hardness of all samples decreased, but total soluble solids and weight loss were not significantly different among treatments. In addition, high-quality dehydrated sweet persimmon was prepared using red algae extract as a dehydrating agent. The rehydration ratio and vitamin C content of red algae extract-treated sample were greater than those of hot-air dried sample. These results suggest that the combined treatment of $ClO_2$ and fumaric acid can be useful for maintaining microbiological safety of sweet persimmon during storage and dehydration of sweet persimmon slices using red algae extract is an efficient drying method for the preparation of high-quality dehydrated sweet persimmon.

• Journal of the East Asian Society of Dietary Life
• /
• v.25 no.6
• /
• pp.1049-1057
• /
• 2015

This study investigated the physicochemical properties of Dioscorea batatas for improvement of biological activities during a three-step steaming process, steaming $120^{\circ}C$ for 30 min and hot air drying at $60^{\circ}C$ for 8 hrs. Samples were extracted with 70% ethanol and analyzed for free sugars, and organic acids were analyzed by HPLC. The DPPH & ABTS radical scavenging activities, crude saponin, water binding capacity, oil absorption, and ${\alpha}$-glucosidase activity were measured. The major free sugars in all samples were fructose, maltose, and sucrose, and the free sugar contents increased to 157~235% after the three-step steaming process compared to the control. Organic acid contents of samples treated by steaming increased to greater than 55.8 mg/100g. The ABTS radical scavenging activity significantly increased with repeated steaming process, especially after the three-step process. As the time of steaming process increased, DPPH radical scavenging activity increased from 26.99% fresh Dioscorea batatas to 80.46~97.79% after the three-step process. Crude saponin content increased rapidly as steaming time increased, but decreased after the three-step process steaming process. The water-binding capacities of the samples treated by steaming process were higher than that of the control, whereas oil absorption decreased as steaming time increased. From the results, steaming process could be suggested as beneficial for controlling fat intake. Compared to acarbose, a known antidiabetic drug, used as a positive control, ${\alpha}$-glucosidase inhibitory activity of samples treated by two-step steaming was among the samples. The results suggest that Dioscorea batatas treated by steaming process has antioxidative and anti-diabetis activities and can be used as a natural health product.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.5
• /
• pp.776-784
• /
• 2016

In this study, green Larix kaempferi lumber was heat-treated by using superheated steam (SHS) at a pilot scale and then various physico-mechanical properties of the heat-treated wood were evaluated and compared with the properties of conventional hot air (HA) heat-treated wood. Decay resistance of brown rot fungi and compressive strength parallel to the grain of the SHS heat-treated wood without occurrence of drying check from green lumber were increased. On the other hand, density, equilibrium moisture content, shrinkage, and bending strength of the SHS heat-treated wood were lower than those of the conventional HA heat-treated wood. Because heat transfer and thermal hydrolysis of SHS heat treatment was accelerated by a large amount of water, the effect of SHS heat treatment on the physico-mechanical properties was higher than that of HA heat treatment at the similar conditions of temperature and time. From the results of this study, because green lumber can be heat-treated without occurrence of cracks or checks by using SHS and similar heat treatment effect on the physico-mechanical properties of wood can be produced despite a low temperature or short time of heat treatment, it is expected that heat time and energy consumption could be reduced by using SHS.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.12
• /
• pp.8165-8175
• /
• 2015

In Korea, summer is hot and humid, and air-conditioners consume lots of electricity. In such case, simultaneous usage of indirect evaporative cooler may reduce the sensible heat and save the electricity. In this study, heat transfer and pressure drop characteristics of indirect evaporative cooler made of aluminum, plastic, plastic/paper are investigated both under dry or wet condition. Results show that indirect evaporation efficiencies of the plastic/paper sample (38.5% ~ 51.4%) are approximately the same as those of the aluminum sample (41.9% ~ 47.5%), and are larger than those of the plastic sample (29.0% ~ 37.4%). This suggests that the plastic/paper sample could be a good substitute to the aluminum sample. However, the pressure drops across the paper channel are 92% ~ 106% larger than those across the aluminum channel. The heat transfer coefficients of the paper channel under dry condition are 15% ~ 44% larger than those of the plastic channel. The increases are 185% ~ 203% for the aluminum channel. The pressure drops of the paper channel are 34% ~ 48% larger than those of the plastic channel and 93% ~ 106% larger than those of the aluminum channel. Rigorous heat transfer analysis reveals that, for the plastic sample, 30% ~ 37% of the wet channels remain dry, whereas all the channels are wet for plastic/paper sample. For aluminum sample, the ratio is 17% ~ 23%.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.12
• /
• pp.8386-8393
• /
• 2015

This study is to investigate the needs for the cool motorcycle helmet and the factors affecting the purchasing intention of cool helmet. The convenient sampling from motorcycle clubs were conducted during 5/20/2014~5/28/2014 on Google DAX. As a result, 197 participants were surveyed. The main reasons of sensing unpleasant feeling wearing helmet were identified as 'hot and uncomfortable feeling' and 'it ruins hair style'. The mean score expressed in terms of five point scale showed that the needs for cool helmet was 3.9 and the purchasing intention of cool helmet was 3.6, respectively. The significant factors influencing the purchasing intention of cool helmet were identified as 'the needs for cool helmet' (odds ratio=6.52) and 'extra paying intention for cool helmet' (odds ratio=1.77). The main reasons of sensing unpleasant feeling wearing helmet were similar to the previous research. However, we can expect that the initial target market for cool helmet would be the low end (less than \40,000 of extra paying intention) or the high end (more than \100,000 of extra paying intention). The main contribution of this study is dealing with the topics related to the purchasing intention of the cool helmet.

• Journal of Bio-Environment Control
• /
• v.18 no.4
• /
• pp.341-347
• /
• 2009

Experiments and computations were conducted to investigate the heat insulation characteristics of multi layer materials for cultivation greenhouse. In case of the experiments, measurements of temperature were carried out with a K-type thermocouples and data logger to research the heat transfer in the experimental module generated by the heat source. A thermal conductivity meter, QTM-500 based on modified transient hot wire method was used to measure the thermal conductivity of multi layer materials. The numerical analyses were performed by commercial code CFX-11 according to the variation of multi layer materials without air layer. The experimental results showed that the heat insulation of multi layer materials was higher than single layer materials by 50~90%. It was found that the effect of heat insulation was raised by the combination of multi layer materials.

• Journal of Preventive Medicine and Public Health
• /
• v.38 no.3
• /
• pp.283-290
• /
• 2005

Objectives : The aim of this paper was to examine the relationship between the summertime (June to August) heat index, which quantifies the bioclimatic apparent temperature in sultry weather, and the daily disease-related mortality in Seoul for the period from 1991 to 2000. Methods : The daily maximum (or minimum) summertime heat indices, which show synergetic apparent temperatures, were calculated from the six hourly temperatures and real time humidity data for Seoul from 1991 to 2000. The disease-related daily mortality was extracted with respect to types of disease, age and sex, etc. and compared with the time series of the daily heat indices. Results : The summertime mortality in 1994 exceeded the normal by 626 persons. Specifically, blood circulation-related and cancer-related mortalities increased in 1994 by 29.7% (224 persons) and 15.4% (107 persons), respectively, compared with those in 1993. Elderly persons, those above 65 years, were shown to be highly susceptible to strong heat waves, whereas the other age and sex-based groups showed no significant difference in mortality. In particular, a heat wave episode on the 22nd of July 2004 ($>45^{\circ}C$ daily heat index) resulted in double the normal number of mortalities after a lag time of 3 days. Specifically, blood circulation-related mortalities, such as cerebral infraction, were predominant causes. Overall, a critical mortality threshold was reached when the heat index exceeded approximately $37^{\circ}C$, which corresponds to human body temperature. A linear regression model based on the heat indices above $37^{\circ}C$, with a 3 day lag time, accounted for 63% of the abnormally increased mortality (${\geq}+2$ standard deviations). Conclusions : This study revealed that elderly persons, those over 65 years old, are more vulnerable to mortality due to abnormal heat waves in Seoul, Korea. When the daily maximum heat index exceeds approximately $37^{\circ}C$, blood circulation-related mortality significantly increases. A linear regression model, with respect to lag-time, showed that the heat index based on a human model is a more dependable indicator for the prediction of hot weather-related mortality than the ambient air temperature.