• Food Science and Preservation
• /
• v.13 no.1
• /
• pp.37-42
• /
• 2006

In recent, Kimchi is produced in the scale of industry, Consumers show increased demand of safety and high quality and hygienic process control. So, sun drying, hot air drying and cold air drying methods were investigated to compare the demand Sun drying took 96 hrs, hot air drying took 4 hrs at $70^{\circ}$ and cold air drying took 102 hrs at $10^{\circ}C$ in removing water to $90\%$ from radish. Brownness of radish was expressed as absorbance. Absorbance were 0.20, 2.04 and 1.87 and also Vit-C contents were 0.14 mg/g, 0.12 mg/g and 0.096 mg/g in dried radish according to cold air drying, hot air drying and sun drying, respectively. From overall experimental results, cold air drying method was found as superior drying method to other drying methods.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.20 no.1
• /
• pp.69-75
• /
• 2016

This paper covers the result of construction and start-up tests of the KSLV(Korea Space Launch Vehicle)-II combustion chamber hot-firing test facility. This facility was constructed from 2012 to 2014. Start-up test of this facility began in the second half of 2014. Oxidizer cold flow test, fuel cold flow test and cooling water cold flow test were carried out as start-up test. Afterward, ignition test of combustion chamber was accomplished. The result of ignition test is applied to set up start-up sequence of KSLV-II combustion chamber and utilized as base line data for hot-firing test of low and normal design point.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.33 no.3
• /
• pp.192-197
• /
• 2000

To develop plain dried products of large anchovy, Engraulis japonica, lipid oxidation during drying of large anchovy and optimal drying condition were investigated. The moisture contents of large anchovy on 7 hrs dryness were $ 9.0{\%},\;34.0{\%},\;38.0{\%} and\;38.8{\%}\;in\;60^{\circ}C$ hot-air drying (wind velocity, 1.4m/sec), $40^{\circ}C$ hot-air drying (wind velocity, 1.4 m/sec), sun drying($30{\pm}5^{\circ}C$) and $20^{\circ}C$ cold-air drying (wind velocity, 3.1 m/sec), respectively. The cold-air drying depressed remarkably the lipid oxidation of large anchovy during drying, resulting from AV, POV, COV and the formation of browning pigment. The fatty acid composition of large anchovy was $35.8{\%} in saturates, 20.0{\%} in monoenes and 44.2{\%}$ in polyenes. Saturates and monoenes were increased in proportion to the increase of drying time, while polyenes were decreased. The contents of 20 : 5 and 22 : 6 of polyenes were decreased remarkably in proportion to the progress of lipid oxidation, while 14 : 0, 16 : 0, 16 : 1 and 18 : 1 of saturates and monoenes were increased. The changes in fatty acid compositions by drying conditions were remarkably clarified in sun drying, followed by $60^{\circ}C$ hot-air drying $40^{\circ}C$ hot-air drying and $20^{\circ}C$ cold-air drying in order.

• Korean Journal of Plant Resources
• /
• v.19 no.5
• /
• pp.580-585
• /
• 2006

This experiment was conducted to study the effects of sulphuric acid, cutting, cold stratification and hot water on the germination of Sophora japonica seeds, which have difficulty to germinate because they have hard and thick seed coats. The seeds were immersed in 30, 60 and 90% sulphuric acid for 30 minutes as seed scarifications, and cut 1/8, 2/8 and 3/8 of the opposite parts of radicles. As cold stratification the seeds were wrapped in wet towel, and then stored in plastic bags in a refrigerator $(4^{\circ}C)$ for 3, 5 and 10 days. The seeds were immersed in hot water $(90{\sim}95^{\circ}C)$ for 2,5 and 10 minutes. Pretreated seeds represented different germination properties, respectively. After sulphuric acid treatment, the seeds showed an increase in germination (G) and germination index (GI). Compared to the other treatments, 90% sulphuric acid showed the highest G (31.7%) and GI (6.2). The G and GI of cut seeds decreased with the increase of seed cutting lengths. And G and GI of cold stratificated seeds were not significantly different among the days treated (p=0.258). Two minutes treatment of hot water showed lower G and Gl than control, and the seeds were not germinated in 5 and 10 minutes treatments of hot water. At the result of relative growth rate and T/R ratio of seedlings from pretreated seeds, the seedlings from seeds in 90% sulphuric acid treatment represented the highest relative growth rate and T/R ratio.

• Journal of the Korean Society for Heat Treatment
• /
• v.27 no.1
• /
• pp.1-9
• /
• 2014

For connector material applications, the influence alloying elements of Mn, Cr, Fe, and Ti and cold rolling reduction on the mechanical property, electrical conductivity and bendiability of Cu-Ni-Si-P alloy was investigated. The hot rolled plates were solution treated at $980^{\circ}C$ for 1.5 h, quenched into water, cold rolled by 10% and 30% reduction in thickness, and then aged at $440{\sim}500^{\circ}C$ for 3, 4, 5 times. respectively. Cu-Ni-Si-P-x alloys cold rolled by 10 reduction before heat treatment have a good bendability compare to cold rolled by 30 reduction. Cu-3.4Ni-0.8Si-0.03P-0.1Ti shows the peak strength value of 759 MPa, an electrical conductivity of 39%IACS, an elongation of 10% and a hardness of 256 Hv aged at $440^{\circ}C$ for 6 hrs. Thus it is suitable for lead frame and connector.

• Steel and Composite Structures
• /
• v.27 no.5
• /
• pp.545-554
• /
• 2018

This study presents a novel method of improving the strength and stiffness of cold-formed steel (CFS) beams. Flexural members are primary members in most of the structures. Hence, there is an urgent need in the CFS industry to look beyond the conventional CFS beam sections and develop novel techniques to address the severe local buckling problems that exist in CFS flexural members. The primary objective of this study was to develop new CFS composite beam sections with improved structural performance and economy. This paper presents an experimental study conducted on different CFS composite beams with simply supported end conditions under four point loading. Material properties and geometric imperfections of the models were measured. The test strengths of the models are compared with the design strengths predicted by using Australian/New Zealand Standard for cold-formed steel structures. Furthermore, to ensure high precision testing, a special testing rig was also developed for testing of long span beams. The description of test models, testing rig features and test results are presented here. For better interpretation of results, a comparison of the test results with a hot rolled section is also presented. The test results have shown that the proposed CFS composite beams are promising both in terms of better structural performance as well as economy.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.11a
• /
• pp.97-100
• /
• 2009

Cold flow and ignition tests were performed for a technology demonstration model of a 75-tonf thrust chamber which is a candidate liquid rocket engine for a next Korea Space Launch Vehicle. The test facility was modified to support the new concepts of the thrust chamber such as ignition system, film cooling and LOx leading supply. The hydrodynamic characteristics of the supply pipelines, thrust chamber and igniter as well as the filling time of the propellants were obtained through the cold flow tests on the LOx and kerosene and the ignition cyclogram was determined using the results. The ignition test was successfully accomplished according to the cyclogram and therefore, a basic information was obtained for further hot firing tests.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.3
• /
• pp.48-54
• /
• 2000

In this study the characteristics of chip formation of the cold drawn Bi-S free machining steels were assessed. And for comparison those of the cold drawn Pb-S free machining steel the hot rolled low carbon steel which has MnS as free machining inclusions and the conventional steels were also investigated. During chip formation the cold drawn free machining steels show relatively little change in thickness and width of chip compare to those of the conventional carbon steels. And a single parameter which indicates the degree of deformation during chip formation chip cross-section area ratio is introduced. The chip cross-section area ratio is defined as chip cross-section area is divided by undeformed chip cross-section area. The variational patters of the chip cross-section area ratio of the materials cut are similar to those of the shear strain values. The shear stress however seems to be dependent on the carbon content of the materials. The cold drawn Bi-S and Pb-S steels show nearly the same chip forming behaviors and the energy consumed during chip formation is almost same. A low carbon steel without free machining aids shows poor chip breakability due to its high ductility. By introducing a small amount of free machining inclusions such as MnS Bi, Pb or merely increasing carbon content the chip breakability improves significantly.

• The Journal of the Acoustical Society of Korea
• /
• v.15 no.5
• /
• pp.53-60
• /
• 1996

In this study, a design methodology for thermoacoustic refrigerator systems is proposed based on the thermal conduction and acoustic theories, and physical characteristics of an actual thermoacoustic refrigerator are investigated. Especially, the resonator is designed for minimizing the energy loss at cold end, and the position and length of the capillary stack are optimized in order to get a large temperature difference between hot and cold ends. Experimental results show that a maximun temperature difference of 22.7$^{\circ}$ and a temperature of 4.3$^{\circ}$C at cold end are obtained by supplying an electrical input of 33W without any thermal load at cold end.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.11 no.2
• /
• pp.125-134
• /
• 2016

NAND flash memory has unique characteristics like as 'out-place-update' and limited lifetime compared with traditional storage systems. According to out-of-place update scheme, a number of invalid (or called dead) pages can be generated. In this case, garbage collection is needed to reclaim invalid pages. Because garbage collection results in not only erase operations but also copy operations of valid (or called live) pages to other blocks, many garbage collection techniques have proposed to reduce the overhead and to increase the lifetime of NAND Flash systems. This techniques sometimes select victim blocks including cold data for the wear leveling. However, most of them overlook the cost of selecting victim blocks including cold data. In this paper, we propose a garbage collection technique named CAPi (Cost Age with Proportion of invalid pages). Considering the additional overhead of what to select victim blocks including cold data, CAPi improves the response time in garbage collection and increase the lifetime in memory systems. Additionally, the proposed scheme also improves the efficiency of garbage collection by separating cold data from hot data in valid pages. In experimental evaluation, we showed that CAPi yields up to, at maximum, 73% improvement in lifetime compared with existing garbage collections.