• Journal of the Korean Society of Food Culture
• /
• v.18 no.2
• /
• pp.139-150
• /
• 2003

The objective of this study consists in promoting seafood consumption by increasing its intake opportunities for children through analysis of seafood using frequency in the elementary school lunch program. For that purpose, randomly sampled out from elementary schools through the county were 155 dietitians and 5th grade 3581 children, on whom a mail survey was conducted to analyse their seafood using frequency, and preference, and lunch menu by seasons. Results of this study are as follows : The seafood using frequency of the respondents represented the highest value in one or two times a week, while obstacles in seafood use presented high values in the safety of food by 71.6% and children preference by 68.4%. The seafood intake frequency of the respondents showed the highest value in three or four times a week by 34.5% and the places of seafood intake indicated the highest response in the home by 43.5% and then school lunch and dining out. The dietitians responded that children for the most part had not a preference for seafood, whereas the children pointed out average by 46.2%. As for reasons for avoidance of seafood, the dietitians expressed the highest response in it depends cooking methods by 45.8%, while the children because of its peculiar taste and smell by 42.1%. Their required improvement showed the highest response in the taste improvement by 51.8%. The children most preference for seafood that dietitians thought included fried Alaska pollack and shrimp cutlet, while dislikes braised mackerels and seasoned cold jelly fish. Cooking methods frequently used were represented in order of soup, hot soup, and stew, and the children's preferred cooking method was from fried food. Above results suggested that the intention to increase seafood using frequency is needed to at the time of planning the menus so that more seafood-providing opportunities can be given. The development of cooking methods is urgently needed that can change the taste or the smell of seafood, and concurrently with this conveniences be taken into account in eating such as elimination of bones, etc. as early as the states of purchase or checking of seafood. The reflection of the preferred cooking methods is thought to contribute to the enhancement of satisfaction with the seafood as well as to the reduction of food remnants. The recommendation of intake of low preference but nutritionally good seafood is required to be expanded in nutrition education.

• Journal of Animal Science and Technology
• /
• v.57 no.10
• /
• pp.36.1-36.9
• /
• 2015

Background: This study examined the effects of dietary supplementation with rice bran, sire breed and gender on live animal performance and carcass characteristics in Australian crossbred and purebred Merino lambs. Methods: Forty-eight lambs balanced by sire breed (Dorset, White Suffolk, Merino) and gender (ewe, wether) were randomly allocated into three dietary supplementation groups (Control- 24 lambs fed wheat/barley-based pellets, Low- 12 animals fed a 50/50 ratio of wheat-based/rice bran pellets, and High- 12 lambs fed rice bran pellets). The Rice bran pellets replaced 19 % of the barley component of the feed. Animals were group-fed at the rate of 1000 g of the supplement per head per day with ad libitum access to lucerne hay as the basal diet and water. The duration of the feeding trial was 49 days with an initial 21-day adjustment period. Results: Sire breed differences were evident for initial (p < 0.0002) and final (p < 0.0016) liveweights, hot carcass (p < 0.0030) and cold carcass (p < 0.0031) weights, as well as dressing percentage (p < 0.0078), fat thickness (p < 0.0467), yield grade (p < 0.0470) and rib eye area (p < 0.0022) with purebred Merino under-performing compared to the crossbreds. Concentrate feed conversion efficiency, costs per unit of liveweight gain and over the hooks income were comparable between treatments regardless of the observed trend where the high supplementation group tended to show lower feed intake (745.8 g/day) compared to both the control (939.9 g/day) and low supplementation groups (909.6 g/day). No significant differences (p > 0.05) were observed between treatments for live animal performance, carcass characteristics, gender and their second-order interactions. Conclusions: Results indicate that Rice bran can be utilised as a cost-effective supplementary feed source in genetically divergent sheep over a 49-day feeding period without detrimental effects on overall live animal performance or carcass characteristics.

• Korean Journal of Food Science and Technology
• /
• v.22 no.3
• /
• pp.241-247
• /
• 1990

In order to develop a type of instant tea cassia tora seed, changes of constiuent amounts before and after roasting $(3{\pm}0.5min\;at\;170{\pm}5^{\circ}C)$ effective extracting solvent and it's optimum concentration, dehydration method and sensory scores were investigated. Moisture, lipid, reducing sugar, emodin and rhein were decreased by roasting, whereas protein, and total sugar of cassia tora increased. Color intensity and extracting efficacy were also increased. Of three kinds of solvent (water, methanol and ethanol), ethanol was highest in redness and yellowness of exeracts, and filtrate yield. Effective extracting concentration of ethanol for cassia tora was 50%(V/V). Freeze dry product(FDP) and spary dry product(SDP) showed coffee and aloe-like smell, coffee like brown color, rapid soluble in cold and hot water, and fast caking in air during storage. Free sugar contents were high in order of raffinose>fructose >glucose>maltose>sucrose Metallic contents were high in order of sodium>calcium>potassium>magnesium>iron. In sensory score for color, taste and aroma, FDP and SDP were both above 8.0 point, however, of them FDP more or less higher than SDP In addion, score in developing value as an instant tea was above 8.0 point (valuable).

• Korean Journal of Food Science and Technology
• /
• v.20 no.4
• /
• pp.504-510
• /
• 1988

The physicochemical properties of rice flours which were obtained by dry milling(blade, hammer, test and micro mill) and wet & dry milling (roller & micro mill) were investigated. The resulting flour particle sizes were reduced in the order that of blade, hammer, test, micro and roller & micro mill. Scanning electron microscopic examination showed that the starch granules were freed from the imbedding matrix as the particles became finer. The test-milled flour had the hightest levels of starch damage, maltose value and hot-water soluble amylose content, and the blade-milled flour showed the lowest levels. Amylograph viscosity and gelatinization temperature of the flours decreased as the particles became finer, and the addition of $Hg^{+2}$ increased the peak viscosity of the dry-milled flour pastes, whereas the wet & dry-milled flour did not show any changes. The blue values and ${\lambda}$max values of the iodine complex of the cold-water extractable ${\alpha}-D-glucan$ from flours were in the range of 0.023-0.029 and 518-522nm, respectively, indicating these materials were shown to be mainly composed of amylopectin-like polymer.

• Journal of the Korean Magnetics Society
• /
• v.23 no.2
• /
• pp.77-81
• /
• 2013

The objective of this study is experimentally to investigate natural convective heat transfer characteristics of the ferrofluid for a concentric annuli under rotating magnetic field with variations of the revolution and the magnetic field strength. The rotating magnetic field was provided by induction motor with 6 poles and 3 phases and the revolution and the magnetic field strength were controlled by an inverter driver and a voltage meter, respectively. Temperatures of the inner pipe and the outer pipe in the tested concentric annuli were maintained at $30^{\circ}C$ and $25^{\circ}C$, respectively, during the test and the direction of the rotating magnetic field was a counterclockwise. As a result, the natural convective heat transfer characteristics of the ferrofluid for a concentric annuli were increased with the rise of the revolution and magnetic field strength due to the increased heat dissipation between hot side and cold side of the concentric annuli.

• Corrosion Science and Technology
• /
• v.10 no.4
• /
• pp.109-117
• /
• 2011

The Korean Peninsula is located in the middle latitude of the northern hemisphere and has a clear 4-seasons and shows the typical temperate climate. Because of seasonal winds, it is cold and dry by a northwestern wind in the winter and it is hot and humid by a southeast wind in the summer. Also, temperature difference between the winter and the summer is large and it shows a rainy season from June to July but recently this regular trend may be greatly changed by an unusual weather phenomena. Since the Peninsula is east high west low type, the climate is complicated too. Because these geographical and climate characteristics can affect the properties of corrosion of metals and alloys, a systematic research on atmospheric corrosion in the Peninsula is required to understand and control the corrosion behavior of the industrial facilities. This paper analyzed the atmospheric corrosion factors for several environments in the Korean Peninsula and categorized the corrosivity of atmospheric corrosion of metals and alloys on the base of the related ISO standards. Annual pH values of rain showed the range of 4.5~5.5 in Korean Peninsula from 1999 to 2009 and coastal area showed relatively the low pH's rain. Annual $SO_2$ concentrations is reduced with time and its concentrations of every major cities were below the air quality standard, but $NO_2$concentration revealed a steady state and its concentration of Seoul has been over air quality standard. In 2007, $SO_2$classes of each sites were in $P_0{\sim}P_1$, and chloride classes were in $S_0{\sim}S_1$, and TOW classes were in ${\tau}_3{\sim}{\tau}_4$.That is, $SO_2$ and chloride classes were low but TOW class was high in Korean Peninsula. On the base of these environmental classes, corrosivity of carbon steel, zinc, copper, aluminium can be calculated that carbon steel was in C2-C3 classes and it was classified as low-medium, and zinc, copper, and aluminium showed C3 class and it was classified as medium.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.10 no.1
• /
• pp.209-246
• /
• 1997

In the literatual study on the Ecthyma, the results were as follows. 1. The pathogenic factors of Ecthyma is divided three parts. One is exogenous pathogenic factors which including the wind evil, wind heat and toxic material produced by wetness evil. Another is endogenous pathogenic factors which including the declination of kidney-yang, impairment of the liver and kidney, the lower classes of yin-fire, accumulation of wetness-heat in the spleen asthenia, impairment of the liver and kidney, wetness-heat of three yang, asthenic heat-syndrome of three yin. The other is pathogenic factors neither endogenous nor exogenous which including the food and living, uncontrol sexual excess, anxiety and angry, injury of skin, injury of insects and animals. 2. Five viscera which was concerned with Ecthyma are liver, spleen and kidney. 3. Frequent region of Ecthyma are S-36(足三里) and C-7(陰交). External Ecthyma was rose to wetness-heat of three yang channel that cured easily. Internal Ecthyma was rose to asthenic heat-syndrome of three yin channel that cured hardly. 4. In the frequency of prescription, the most numerous prescription is Bojungikgitang(補中益氣湯) and the next are Kyukgigo(隔紙膏) and Yukmijihwanghwan(六味地滉丸). 5. In the frequency of medicine, the most medicine is Calomelas(輕粉) which included Hydrargyrum(水銀) and the next are Olibanum(乳香) and Resina Commiphorae Myrrhae(沒藥) which regulating vital energy and pain control medicine used that in order to destroy insects and remove polson. 6. In classification of the medical action, medicine of clearing away summer-heat and heat evil and activating blood circulation to dissipate blood stasis used to be very busy which in order to remove the disorder of vital energy for virulent heat-evil. 7. In classification of four characters, the most part is warm medicine, the next are cold and cool medicine and there is a few that is hot medicine. 8. In classification of five tastes, the most numerous tastes are bitter and acrid, the next are sweet, salty and sour tastes. 9. In classification of virulence of medicine, the most part is non-toxic, the next are weakly and deadly poison. 10. In classification of channel distribution, the most is the medicine that belongs to liver channel, the next are the lung, spleen, stomach and kidney channel.

• Korean journal of food and cookery science
• /
• v.6 no.3 s.12
• /
• pp.1-7
• /
• 1990

The physicochemical properties of acorn and chestnut starches were investigated. The shape of two starches granules was the rounded trianglar and some elliptical, but that of chestnut was less rounded. Water binding capacity of acorn was 191% and that of chestnut was 200%. Gel volume of chestnut started to increase from $55^{\circ}C$, and was higher value in all temperature range. Amylose of chestnut starch was leached more than that of acorn to $90^{\circ}C$. and reversely from $90^{\circ}C$ to $100^{\circ}C$. The blue value and amylose content of acorn and chestnut starches were 0.464, 0.440 and 24.8%, 22.5 respectively. According to Brabender Amylogram, gelatinization temperature and peak. hot and cold viscosity were $68.5^{\circ}C$, 1010, 910, 1470 BU for acorn and $63.7^{\circ}C$, 1480, 1000, 1080 BU for chestnut. Peak temperature and gelatinization enthalpy were $67.0^{\circ}C$ 3.64 cal/g for acorn, and $66.0^{\circ}C$, 2.82 ca1/g for chestnut. X-ray diffraction patterns of two starches were A-types but chestnut had some B-type character.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.6
• /
• pp.29-36
• /
• 2015

In this study, to examine the use of sulfur polymer as a coating agent for concrete, durability and hazard evaluations were performed. The result of the evaluation indicated that the chemical resistance of the coating agent for concrete was outstanding against acidic, base, and alkaline solutions. The evaluation of the bond strength after an accelerated weathering test depending on the mixing condition indicated that the most outstanding strength characteristic was obtained when silica powder and fly ash were mixed at the same time. The bond strength exceeded 1 MPa in every mixing condition even after the repeated hot and cold treatment of the coating agent specimen for concrete, and the SFS mix proportion showed the highest bond strength. The examination of the accelerated carbonation and chloride ion penetration resistance of the concrete coated with the coating agent indicated that the specimen coated with the coating agent using silica powder as a filler showed the most outstanding durability. When a fish toxicity test was performed to examine the hazard of the use of the functional polymer as a coating agent for concrete, the functional polymer was found to have no effect on the organisms. When the chemical resistance, freezing and thawing resistance, carbonation, and chloride ion penetration resistance of the coating agent were considered, substituting silica powder and fly ash as the fillers of the functional polymer by 20%, respectively, was the optimal level in the range of this study.

• Korean Journal of Food Science and Technology
• /
• v.34 no.5
• /
• pp.879-884
• /
• 2002

Cold and hot water fractions of Diospyros kaki were screened to determine its anti-complementary activity. Flour of Diospyros kaki leaf (250 g) was boiled at $100^{\circ}C$ for 3 h and passed through a membrane of 10 kDa molecular weight (DK-0). DK-0 was precipitated with ethanol and refluxed with methanol to obtain the crude polysaccharide (DKC). DKC-1 was isolated by ion exchange chromatography on DEAE-Toyopearl 650C, and DKC-1c was purified from DKC-1 by size exclusion chromatography on Bio gel P-60. The anti-complementary activities of DKC-1c at $1000\;{\mu}g/mL$ were 85.4 and 61.1% via whole and alternative pathways, respectively. DKC-1c was determined as a neutral polysaccharide composed of glucose (29.0 mol.%), arabinose (24.3 mol.%), and galactose (16.2 mol.%) with the molecular weight of 66.6 kDa. Results of agarose gel immunoelectrophoresis revealed DKC-1c, as a complement activator, cleaved C3 into C3a and C3b via both pathways.