• Journal of the Korean Institute of Landscape Architecture
• /
• v.48 no.5
• /
• pp.67-79
• /
• 2020

Plans to mitigate overheating in urban areas requires the identification of the characteristics of the thermal environment of the city. The key information is the distribution of higher and lower temperatures (referred to as "hotspot" or "coldspot", respectively) in the city. This study aims to identify the areas within Jeonju City that are suffering from increasing land surface temperatures (LST) and the factors linked to such this phenomenon. To identify the hot and cold spots, Local Moran's I and Getis-Ord Gi^* were calculated for the LST based on 2017 images taken using the thermal band of the Landsat 8 satellite. Hotspot analysis revealed that hotspot regions, (the areas with a high concentration of Land Surface Temperature) are located in the old town area and in industrial districts. To figure out the factors linked to the hotspots, a correlation analysis, and a regression analysis taking into account environmental covariates including Normalized Difference Vegetation Index (NDVI) and land cover. The values of NDVI showed that it had the strongest effect on the lowering LSTs. The results of this study are expected to provide directions for urban thermal environment designing and policy development to mitigate the urban heat island effect in the future.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.15 no.3
• /
• pp.83-91
• /
• 2009

It is very difficult to export the fresh agricultural products to long distance countries such as USA and EU without any damage. Fresh products exporting would overcome very severe conditions such as hot and cold weather changes, heavy vibrations with rolling and pitching during the target distribution period, therefore, the packaging needs the immobility of products in the container and the keeping its quality by packaging materials or methods under any surrounding environments, especially. The physical strength of outer box should be designated according to its own characteristics for agricultural product packaging. Packaging dimension which would be fit to standard pallet is also very important factor to reduce the distribution cost. There have been many agricultural products researches for export packaging to the USA so far. However they have never got desirable results which enough to apply it in real. The main purpose of this research is to develop optimum compressive strength and optimum dimension of corrugated fiberboard box which would be used to USA export packaging of fresh melon as well as Japan.

• The Journal of Pediatrics of Korean Medicine
• /
• v.12 no.1
• /
• pp.111-131
• /
• 1998

1. In oriental medicine, the case of sinusitis can be explained, not only external invasion such as PUNG HAN(wind-cold), PUNG YUL(wind-hot), SHUP YUL(damp-heat), but also functional disorder of internal organ such as spleen(脾), lung(肺), kidney(腎) The western medicine classified the cause of sinusitis as two factors. That is bacterial infection factor-Haemophilus influenza, streptococcus pyogeues, streptococcus pneumonia- and viral infection factor-Rhinovirus, parainfluenza, Echo28, Coxsacki21, Sinusitis is complicated to allergic rhinitis, chronic otitis media purulent, chronic tonsilitis, sinubronchitis. On the condition of nasal septum deformity, turbinates deformity, nasal septum deviation, sinusitis can be developed. the predisposing factors of sinusitis is swimming, air pollution, malnutrition, shortage of immunity.2. According to survey, sinusitis occurred that children from 4 to 12 years old and from 5 to 7 years old occupied 70% 3. From the past history data, they experienced chronic tonsillar hypertropy(20%), otitis media, atopic dermatitis, allergic rhinitis, bronchial asthma, pneumonia, bronchiolitis, chronic sore throat, urticaria, milk allergy in sequence. 4. the symptoms of sinusitis is nasal obstruction, postnasal dripping, purulunt(yellow)or white discharge, cough, nose bleeding in sequence. nasal obstruction take the portion of 95%, postnasal dripping 65%, night time or early morning cough 60%. 5. The suffering period of sinusitis is 6 month minimum, 4 years maximum, most cases are included in a year. The suffering period of children was shorter than adult. 6. Diagnosis depend on inspection of nasal cavity, postnasal dripping, X-ray finding. 75% of patient(15case) showed both maxillary sinusitis, 25%(5cases) showed left or right maxillary sinusitis. 7. Treatment of oriental medicine, consist of Herb-medicine, acupuncture and exposing of Lazer beam. Kamihyunggyeyungyotang(加味荊芥蓮翹湯) is administered mainly as the medical therapy, Kamigwaghyangjeungkisan(加味藿香正氣散) Kimizwakwieum(加味左歸飮), Kamihyangsosan(加味香蘇散) is administered for a additional symptoms which occurred by influenza recurrence. Kamijeonxibackchulsan(加味錢氏白朮散) is administered to treat gastro-intestine trouble patients who have sinusitis. 8. The period of treatment is varied with patient conditions and X-ray finding. The minimal period is 35days, maximal period is 202days. So it took about 86days in average and about 50% of patient(10cases) is recovered in one or two month.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.6 no.1
• /
• pp.17-27
• /
• 1996

This study was designed to survey exposure levels of formaldehyde among workplaces in some plywood industries and to compare three sampling methods including the impinger method(IM, NIOSH method No. 3500), the solid sorbent tube method(SS, NIOSH method No. 2541), and the passive bubbler monitor method(PB, SKC). The survey was conducted in seven particle board manufacturing factories, two resin manufacturing factories and two plywood manufacturing factories in Incheon area during the period from March 6 to April 20, 1995. The workplaces included were the hot/cold press, the roller/spreader, the soaking/drying, and the reaction/mixing areas. The results were as follows; 1. The average(GM, GSD) concentrations of formaldehyde by sampling methods were 0.11(4.43) ppm by IM, 0.27(2.03) ppm by SS, and 0.29(2.04) ppm by PB, respectively. The concentrations by 1M method were statistically very significantly lower than those of SS and PB methods, particularly at low air borne concentrations of formaldehyde (p<0.001). 2. The area average concentrations of formaldehyde by workplaces measured with PB bubblers were 0.23(2.08) ppm from the press, 0.23(1.77) ppm from the spreader, 0.24(1.51) ppm from the soaking, and 0.46(1.96) ppm from the reaction areas, respectively. The personal average concentrations of formaldehyde by workplaces measured with PB bubblers were 0.30(1.77) ppm from the press, 0.33(1.54) ppm from the spreader, 0.36(1.46) ppm from the soaking, and 0.84(1.19) ppm from the reaction areas, respectively. 3. No statistically significant differences of formaldehyde concentrations among workplaces except the reaction area(p<0.001) were found. 4. Formaldehyde concentrations from personal samples were higher than those of from area sam pies in all workplaces studied. But no statistically significant differences of formaldehyde concentrations both area and personal samples were found. In conclusion, this study found that although formaldehyde concentrations in some plywood industries in Incheon area were below the regulatory limit of 1 ppm, they were over the limits recommended by NIOSH and ACGIH. This study also suggests that the impinger method may underestimate true formaldehyde concentrations. It implies that there will be more workplaces not meeting current regulatory limit if either the solid sorbent or passive bubbler methods were used instead of the impinger method. It is suggested that passive monitors will be a reasonable alternative for area and personal sampling of formaldehyde if the accuracy and validity of passive monitors be verified before use.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.7
• /
• pp.607-615
• /
• 2020

The purpose of this study was to analyze the research status and trends related to the industrial mathematics based on text mining techniques with a sample of 4910 papers collected in the SIAM Journal on Applied Mathematics from 1970 to 2019. The R program was used to collect titles, abstracts, and key words from the papers and to analyze topic modeling techniques based on LDA algorithm. As a result of the coherence score on the collected papers, 20 topics were determined optimally using the Gibbs sampling methods. The main results were as follows. First, studies on industrial mathematics were conducted in a variety of mathematics fields, including computational mathematics, geometry, mathematical modeling, topology, discrete mathematics, probability and statistics, with a focus on analysis and algebra. Second, 5 hot topics (mathematical biology, nonlinear partial differential equation, discrete mathematics, statistics, topology) and 1 cold topic (probability theory) were found based on time series regression analysis. Third, among the fields that were not reflected in the 2015 revised mathematics curriculum, numeral system, matrix, vector in space, and complex numbers were extracted as the contents to be covered in the high school mathematical curriculum. Finally, this study suggested strategies to activate industrial mathematics in Korea, described the study limitations, and proposed directions for future research.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.12
• /
• pp.1745-1752
• /
• 2008

This study was conducted to compare the growth performance and carcass evaluation of Jeju native cattle (JNC) and its crossbreds (CBK = 25 JNC: 50 Charolais: 25 Brahman and BCBK = 62.5 JNC: 25 Charolais: 12.5 Brahman) fed for a short fattening period. Eight male calves each of JNC (80.$40{\pm}10$), CBK ($113.50{\pm}12.3$), and BCBK ($100.3{\pm}9.5$) were weaned at 4 month of age and were fed similar diets for 18 months of their age. All animals were fed a growing ration until 12 months of age and thereafter switched to a fattening ration for a period of 6 months. Final body weight (BW) and BW gain were significantly higher in CBK and BCBK compared with JNC. The CBK and BCBK gained 27.42% and 25.99% more BW, respectively, compared with JNC. The CBK and BCBK animals consumed significantly less DM than JNC to gain a unit of BW. Body weight gain, DM intake and feed conversion efficiency were similar between CBK and BCBK. Weight of hot and cold carcass, ribs, boneless meat and Longissimus dorsi muscle area were significantly different among JNC and its crossbreds. The heaviest carcass was observed in CBK followed by BCBK and JNC. Carcass, chest and femur lengths were greater in CBK and BCBK compared with JNC. Chest width, chest depth and hip width were similar in JNC and its crossbreds. Femur width was significantly greater in CBK compared with BCBK and JNC. Femur depth and chest girth were significantly greater in CBK and BCBK compared with JNC. Weight and fat yield in different carcass cuts were greater in crossbreds compared to JNC. Percent moisture, crude ash, and crude protein of meat were similar in JNC and its crossbreds. Percent crude fat in beef was significantly greater in JNC compared with its crossbreds. Beef shear force value, percent water holding capacity, juiciness and tenderness were significantly greater for JNC compared to its crossbreds. In conclusion, CBK and BCBK have shown greater growth rates and produced heavier carcasses with good degree of fatness when compared with JNC.

• The Korean Journal of Quaternary Research
• /
• v.17 no.2
• /
• pp.161-161
• /
• 2003

During the last century, most scientific questions related to climate change were focused on the evidence of anthropogenic global warming (IPCC, 2001). There are robust evidences of warming and also human-induced climate change. We now understand the global, mean change a little bit better; however, the uncertainties for regional climate change still remains large. The purpose of this study is to understand the past climate change over Korea based on the observational data and to project future regional climate change over East Asia using ECHAM4/HOPE model and MM5 for downscaling. There are significant evidences on regional climate change in Korea, from several variables. The mean annual temperature over Korea has increased about 1.5∼$1.7^{\circ}C$ during the 20th century, including urbanization effect in large cities which can account for 20-30% of warming in the second half of the 20th century. Cold extreme temperature events occurred less frequently especially in the late 20th century, while hot extreme temperature events were more common than earlier in the century. The seasonal and annual precipitation was analyzed to examine long-term trend on precipitation intensity and extreme events. The number of rainy days shows a significant negative trend, which is more evident in summer and fall. Annual precipitation amount tends to increase slightly during the same period. This suggests an increase of precipitation intensity in this area. These changes may influence on growing seasons, floods and droughts, diseases and insects, marketing of seasonal products, energy consumption, and socio-economic sectors. The Korean Peninsular is located at the eastern coast of the largest continent on the earth withmeso-scale mountainous complex topography and itspopulation density is very high. And most people want to hear what will happen in their back yards. It is necessary to produce climate change scenario to fit forhigh-resolution (in meteorological sense, but low-resolution in socio-economic sense) impact assessment. We produced one hundred-year, high-resolution (∼27 km), regional climate change scenario with MM5 and recognized some obstacles to be used in application. The boundary conditions were provided from the 240-year simulation using the ECHAM4/HOPE-G model with SRES A2 scenario. Both observation and simulation data will compose past and future regional climate change scenario over Korea.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.7
• /
• pp.342-347
• /
• 2016

This study examined the effects of the coarse aggregate maximum size and grading of fine aggregates to acquire the characteristics of very low shrinkage on normal strength concrete mixed in the field. In addition, the shrinkage characteristics of concrete under construction were evaluated in accordance with the curing temperature. The compressive strength and drying shrinkage tests were performed for nine mixing factors composed of the coarse aggregate size (13, 20, and 25 mm), types of fine aggregate (see sand, crushed sand, and blended sand), and curing temperatures (5, 20, and $35^{\circ}C$). To acquire low shrinkage properties under $350{\mu}{\varepsilon}$ strain on normal strength concrete, a 25 mm maximum of coarse aggregate was available, and the grading of fine aggregate affected the shrinkage of concrete. In addition, very low shrinkage properties were acquired in the curing temperature range except cold and hot weather concrete.

• Journal of Korean Medical classics
• /
• v.12 no.1
• /
• pp.168-195
• /
• 1999

The hakgil is the important disease in the oriental medicine historically. In the preseant time also this disease continually appear all over the world. So purpose of this study is that consider the symptoms and pathogenesis of hakgil(瘧疾) with the point of view of oriental medicine. And in this study, the results are summarized as the followings. 1. The symptos of hakgil(瘧疾). 1) Rigor and heat spasm : The main symptoms of hakgil is the severe and periodical rigor and heat spasm. Generally the rigor first appear and later the heat spasm appear. According to the first and last, severe and weak, the hakgil is classified to hanhak(寒瘧), onhak(溫瘧), danhak(癉瘧), binhak(牝瘧). 2) The regulation of the time of spasm : The spasm occour in the same time daily or one time in two days, three days or several days. And the spasm time is regulary in day or night. 3) The term between the spasm and next one become later or faster. It can be decided that the becoming worse and better in the disease with the signs. 4) The seasonal property Generally the hakgil appear in summer and early autumn. 5) The other kind of hakgil there are five-organ hakgil(五臟瘧), six-kyung hakgil(六經瘧), janghak(瘴瘧), kuihak(鬼瘧), six-gi hakgil(六氣瘧), damhak(痰瘧), sikhak(食瘧), and so on. 6) The pulse condition of the hakgil is chiefly hyun(弦). 2. The pathogenesis of the hakgil 1) The cause of the hakgil The causes of the hakgil first are the seo(暑) or heat(熱) that make the problem in the cycle of five phases(五行). In the consequence, il open the hole of skin so that the pathogenic factors easily invade the humanbody and at the same time the pathogenic factor in the inside easily come out, that make the spasm. In the second time the pathogenic factor of yin(陰) - wind(風), cold(寒), water(水) invade through the opened skin to combine with the factor in the inside. Such condition make the hakgil and the accessory spasm. 2)The pathogenesis of hakgil(瘧疾) (1) The rigor and heat spasm of hakgil(瘧疾) appear because in summer the human body don't accomplish a task of summer because of hot weather or heat, so in autumn the ki(氣) of human body separate into yin(陰) and yang(陽), and the skin of human body is weaken so the saki(邪氣: pathogenic factors) is easily come into the human body. At this time the circulation of ki(氣) is obstructed, so the jungki(精氣: vital substance) apply to straighten the circulation of ki(氣), if the jungki(精氣: vital substance) help the yin(陰) the rigor spasm appear in the opposit direction the jungki(精氣: vital substance) help the yang(陽) the heat spasm appear. (2) The period of circulation of ki(氣) and jungki(精氣: vital substance) is one day, so the general period of spasm of hakgil(瘧疾) is one day, But if the saki(邪氣: pathogenic factors) come into the human body deeply, the jungki(精氣: vital substance) cannot apply 10 straighten the circulation of ki(氣) every day so the period of spasm become longer.

• Journal of Nutrition and Health
• /
• v.49 no.1
• /
• pp.43-50
• /
• 2016

Purpose: This study was conducted to examine prerequisite-program performance of the hospital foodservice operation and develop measures for improvement of prerequisite-program performance. Methods: Data were collected through surveys administered to 168 hospital dieticians in the Seoul, Incheon, Gyeonggi-do, Daegu, and North Gyeongsang areas. Out of total questionnaires, 65 questionnaires were usable and the response rate was 38.7%. Statistical analyses were performed using the SPSS program (ver 20.0) for ${\chi}^2-test$ and one-way ANOVA. Results: According to the result of the prerequisite-program evaluation, the percentage of 'appropriate', 'needs to be improved', and 'inappropriate' was 44.6%, 47.7%, and 7.7%, respectively. The score for the 'inappropriate' group was significantly lower than that of the 'appropriate' group or 'needs to be improved' group on the food safety management (p < 0.001), preparation facility management (p < 0.001), water management (p < 0.001), and storage transportation management (p < 0.05) parts. Holding rate of foodservice facility and equipments in the 'appropriate' group were significantly higher than in the others on convection oven (p < 0.01), air conditioner (p < 0.01), three-compartment sink (p < 0.01), hot-holding equipment (p < 0.01), cold-holding equipment (p < 0.05), exclusive thawing refrigerator (p < 0.05), and sterilizer for sanitary shoes (p < 0.05) items. Conclusion: To improve the quality of hospital foodservice, foodservice managers and HACCP specialists should develop and implement a prerequisite-program and a HACCP plan considering the characteristics of the hospital foodservice operation.