• Journal of the Korean Wood Science and Technology
• /
• v.30 no.3
• /
• pp.109-115
• /
• 2002

Mycelial growth of L. edodes by pretreatments of softwood was studied on a sawdust medium. The sawdust used was from the following softwood species : Larix leptolepis, Pinus densiflora and Pinus koraiensis. The pretreatment consisted of cold-water (48 h), hot-water (3 h) and steam extractions (3 h) at a ratio of 500 g : 3,000 mL (sawdust : distilled water). The sawdust medium was a mixture of 76% sawdust, 20% rice bran, 3% glucose, 0.4% potassium nitrate and 0.6% calcium carbonate. Following sawdust pretreatments proved most suitable : L. leptolepis (steam extraction), P. densiflora (hot-water extraction) and P. koraiensis (hot-water extraction). Mycelial growth on P. koraiensis sawdust increased in proportion to an increase in hot-water extraction time. Mycelial growth was optimum on the sawdust extracted for 12 hours, hot-water extraction beyond this period proved unsuitable. With the exception of P. densiflora at 100 ㎍/mL, antifungal activity occurred in every sample. Maximum inhibition of mycelial growth was obtained from following concentration of hot-water extractives : P. densiflora (10⁴ ㎍/mL) and P. koraiensis (10⁴ ㎍/mL). This study has provided useful preliminary information for the cultivation of L. edodes.

• Solar Energy
• /
• v.18 no.3
• /
• pp.71-80
• /
• 1998

In thermal energy storage system, energy collected from many types of heat source is stored in a storage tank and then supply to load for demand. Lately, practical use of thermal energy storage system and attention to essential use of energy have been increased. From this point of view, especially, a study about the energy extraction process from a storage tank is necessary. So in this study, useful rate of hot water and hot water extraction efficiency was analysed respect to dynamic and geometric parameters dominating the hot water extraction process.

• Korean journal of food and cookery science
• /
• v.28 no.1
• /
• pp.51-55
• /
• 2012

This study was conducted to investigate the physicochemical properties of citrus peel extracts with different hot water extraction and enzymatic hydrolysis conditions. Enzymatic hydrolysis was also employed using Viscozyme L and results were compared with that of optimized hot water extract. Hot water extraction was performed under different parameters; the sample to solvent ratio(1:20, 1:15, 1:10), extraction time(2, 4 hrs), extraction temperature(85, $95^{\circ}C$) and enzymatic hydrolysis(0, 1%) and the subsequent extracts were used for determining their physicochemical properties, such as total yield, total phenolics, total flavonoids, and electron donating ability (EDA). With the increase in the sample to solvent ratio and extraction time, total yield, total phenolics, total flavonoids and EDA increased. But extraction temperature did not significantly affect the hot water extract. As hot water extract was hydrolyzed by the enzyme, total yield and active ingredients increased rapidly. In the result of total yield, total phenolics, total flavonoids and EDA, the activity of enzyme-treated extract was higher than those of enzyme-untreated extract. Based upon the overall hot water extraction efficiency, it was found that 20 times volume or 120 min at a time at $95^{\circ}C$ after enzyme treatment was optimal.

• Journal of Acupuncture Research
• /
• v.29 no.1
• /
• pp.15-24
• /
• 2012

Objectives : In recent years, many studies have been widely researching anti-inflammation effect of various medicinal plants. $Cinnamomi$ $Cortex$ was not enough in researching of the anti-inflammation. Moreover, there is no comparative study about extraction methods. Therefore, we investigated the inhibitory effects of $Cinnamomi$ $Cortex$ pharmacopuncture by EtOH and Hot water extraction on Nitric oxide(NO), Prostaglandin E2(PGE2) production, Cyclooxygenase(COX)-2, inducible NOS(iNOS) expression and extracellular signal regulate kinase(ERK)1/2 phosphorylation in lipopolysaccharide(LPS) induced RAW 264.7 macrophage cell. Methods : $Cinnamomi$ $Cortex$ was extracted by EtOH and Hot water. RAW 264.7 macrophage cell viability was measured by MTT assay. Effect of $Cinnamomi$ $Cortex$ pharmacopuncture on NO and PGE2 production in LPS induced macrophages was accessed by Griess assay and enzyme-linked immunospecific assay(ELISA), respectively. Inhibition effect on COX-2, iNOS expression and ERK1/2 phosphorylation was examined by Immunoblotting assay. Results : 1. Cytotoxic effect of $Cinnamomi$ $Cortex$ pharmacopuncture by Hot water extraction in RAW 264.7 macrophages was not appeared, except $3125{\mu}g/m{\ell}$. And cytotoxic effect was not appeared in EtOH extraction method. 2. $Cinnamomi$ $Cortex$ pharmacopuncture by EtOH and Hot water extraction inhibited NO production in LPS induced macrophages significantly. 3. $Cinnamomi$ $Cortex$ pharmacopuncture by EtOH and Hot water extraction inhibited PGE2 production in LPS induced macrophages significantly. 4. $Cinnamomi$ $Cortex$ pharmacopuncture by EtOH and Hot water extraction inhibited COX-2, iNOS expression in LPS induced macrophages. Especially, it has been confirmed that COX-2, iNOS expression were effectively inhibited in Hot water extraction. 5. $Cinnamomi$ $Cortex$ pharmacopuncture by EtOH and Hot water extraction inhibited ERK1/2 phosphorylation in LPS induced macrophages. Especially, it has been confirmed that ERK1/2 phosphorylation was effectively inhibited in Hot water extraction. Conclusions : According to the results, $Cinnamomi$ $Cortex$ pharmacopuncture suppresses NO, PGE2 production, COX-2, iNOS expression and ERK1/2 phosphorylation in LPS induced macrophages. It has a potential for treating various inflammatory diseases, and Hot water extraction method could be used more extensively than EtOH extraction method.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.13 no.7
• /
• pp.549-556
• /
• 2001

Heat flow characteristics during hot water extraction process was studied experimentally. Data were taken at various outlet port type for the fixed inlet port type, inlet-outlet temperature differences and mass flow rates. In this study, the temperature distribution in a storage tank and an outlet temperature were measured to predict a flow pattern in the storage tank, and a hot water extraction efficiency was analysed with respect to the variables dominating a extraction process. Experimental results show that the extraction efficiency is high in a low flow rate in case of using modified distributor I(MDI) as a outlet port type.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.14 no.6
• /
• pp.503-511
• /
• 2002

Heat flow characteristics during hot water extraction process was studied experimentally. Data were taken at various outlet port type for the fixed inlet port type, inlet-outlet temperature differences and mass flow rates. In this study, the temperature distribution in a storage tank and an outlet temperature were measured to predict a degree of stratification in the storage tank, and a useful rate of hot water was analysed with respect to the variables dominating a extraction process. Experimental results show that the degree of stratification and useful rate of hot water are all high in a low flow rate in case of using modified distributor I (MDI) as the outlet port type.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.43 no.1
• /
• pp.83-91
• /
• 2011

Hemicelluloses are useful materials for papermaking and other biotechnological applications. To recover and further utilize the hemicelluloses, this study carried out the pre-extraction of the hemicelluloses from Korean mixed hardwoods chips using hot water and sodium hydroxide solution at various temperature and time conditions. Through the hot water pre-extraction, the wood components of 22% was extracted and the 35% of the hemicelluloses which were contained in the original wood chips were dissolved into the pre-extractives. The yield of the pre-extractives was more significantly influenced by the pre-extraction temperature than the time. The pre-extractives with the yield of 30% could be obtained by alkali pre-extraction and alkali concentration was the most important factor. It had lower hemicellulose content but high molecular weight, compared with the hot water pre-extractives.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1995.05a
• /
• pp.53-59
• /
• 1995

In a hot water extraction process, the flow pattern of upper region in a storage tank is a major reason of mixing between hot water and cold water. In this study, the temperature distribution in a storage tank was measured to predict the flow pattern of upper region, and the degree of stratification was analysed to the variables dominating a extraction process. And also, it was found that the degree of stratification improved expecially in a low flow rate in case of using modified distributor I(DMI) as a outlet port type.

• Korean Chemical Engineering Research
• /
• v.55 no.3
• /
• pp.358-362
• /
• 2017

In this study, the optimization of extraction parameters (solvent, temperature, time, solvent concentration) for the maximization of polyphenol extraction was performed to produce value-added food and cosmetic additives using a byproduct of coffee extraction process (coffee residue). All of the extraction parameters evaluated in this experiment had significant effects on polyphenol extraction and the results showed the effect of NaOH concentration on the polyphenol production was most significant among tested parameters. Especially, hot water extraction using acid or base was effective rather than hot-water extraction and the addition of 0.1 mol of NaOH increased 1.5 times extraction concentration compared with hot-water extraction using distilled water. It was found that hot-water extraction with NaOH was more effective than hot-water extraction, and 36.5 mg GAE/g DM was obtained under optimum condition of $100^{\circ}C$, 2 mol of NaOH and 30 min. This result was 2.9 times higher than that of 12.5 mg GAE/g DM obtained from the hot-water extraction before optimization. Thus, coffee residue could be used for food and cosmetic industry as a high-value additive such as antioxidant.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.26 no.2
• /
• pp.113-118
• /
• 2013

In this study, silk sericin films were prepared using different extraction methods, and the molecular conformation of sericin was examined using Fourier-transform infrared spectroscopy with attenuated total reflection geometry. Additionally, the effect of the film side (air-facing side or plate-facing side) on the molecular conformation of the sericin films was investigated. Interestingly, the molecular conformation of the sericin film depended on the film side. The molecular conformation of air-facing side of the sericin film was significantly influenced by extraction solution and time. The ${\beta}$-sheet crystallization and the crystallinity index of the sericin film markedly increased with an increase in the extraction time in hot water. The order of the crystallinity indices for the sericin films obtained with different extraction solutions was as follows: citric acid solution > urea solution >> hot water. In contrast, no remarkable differences were observed in the molecular conformation of the plate-facing side of the sericin film after extraction in hot water for different time periods. Urea and citric acid solution extractions showed remarkably higher crystallinity indices for sericin than those obtained after hot water extraction. However, no significant differences were observed in the crystallinity index of sericin between urea and citric acid solution extraction in plate-facing side of the film.