• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.381-388
• /
• 2003

The paper presents our study of development for multi-cavity preform mold system which consists of hot runner system and valve gate. For this purpose, stretching blow molding process and preform injection process were simulated by Polyflow and Moldflow. Based on various results of the preform injection process analysis, process planning was established. The sectional thickness distribution of preform was optimized. Preform injection mold system was designed by these technical analysis data. Finally, 24-cavity preform mold system was successfully developed.

• Design & Manufacturing
• /
• 제13권1호
• /
• pp.36-41
• /
• 2019

A large plastic molding requires an injection molding with a large clamping force. However, it could not be prepared in the manufacturing at any time. In order to solve the problem, the injection molding analysis study was conducted on the back cover of 55 inch LED TV. The study compared the case of applying the existing flow system such as hot runner, the improvement of the hot runner lay-out and the precise control of the gate operation time, From the results of using the improved flow system, it was found that the welding and the clamping force were considerably improved as compared with before the improvement. In particular, the clamping force was reduced by 50% compared with before the improvement.

• 한국산학기술학회논문지
• /
• 제9권6호
• /
• pp.1726-1732
• /
• 2008

사출성형은 다양한 형태의 제품을 대량 생산할 수 있는 플라스틱 성형 공법중의 하나이다. 플라스틱 제품을 만들기 위해서는 고상의 재료를 액상으로 녹인 후 다시 고상으로 굳히는 과정을 거치는 데, 이 과정 중에 많은 문제점들이 발생을 하게 된다. 과거에는 이러한 문제를 해결하기 위해서 성형 후 금형 설계 변경 등의 시행착오적 방법을 사용하였으나, 성형과정에 대한 사출성형 CAE(Computer Aided Engineering)를 적용함으로써, 사전에 문제점을 파악하는 기술이 도입되었다. 플라스틱 제품의 큰 문제점 중 하나가 치수안정성이다. 특히 박막사출성형품은 게이트의 위치, 냉각채널과 온도에 따라서 변형량이 크게 달라진다. 본 연구에서는 현재 Stackmold방식으로 4개의 Cavity에 4개의 Hot-Runner가 설치된 금형을 통해 생산중인 DVD Tray 박막사출제품의 생산 원가 절감을 위해서 Cavity하나에 한 개의 Hot-Runner를 설계하기 위해서 CAE 해석을 통해 게이트의 위치, 냉각채널과 온도에 따라 비교하여 해석해 최적의 제품 설계를 하였다. CAE 해석에는 상업화된 CAE 프로그램인 Moldflow를 사용하였고, 수지는 PC+ABS를 사용하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.1265-1266
• /
• 2010

• 동력기계공학회지
• /
• 제12권6호
• /
• pp.78-82
• /
• 2008

Plastic gears are more and more widely used in many industrial machine elements. Plastic gear has higher properties such as light weight, wear resistance, and vibration absorbing ability than metallic gears. But, in case of using an inaccurate plastic gear, its tooth breakage happen and fatigue life is shortened due to increase of applying load and temperature rising on the tooth flank. Inaccuracy of plastic gears such as pitch circle roundness and tooth profile generates vibration and noise. In this study, an internal plastic gears which is molded by a new injection mold structure are developed. The new mold structure is called the HR3P(hot runner type 3plate mold) that has an improved runner system in order to have good filling balance. As a result from this study, an internal gear with very accurate roundness was developed by using design of experiment.

• 대한기계학회논문집A
• /
• 제39권1호
• /
• pp.111-115
• /
• 2015

핫 러너를 이용한 사출 공정에서는, 색교체가 중요한 문제이다. 이 연구는 열가소성 수지의 색교체 특성을 평가할 수 있는 방법을 제시하고자 한다. 캐필러리 다이를 이용하여 색교체도를 평가할 수 있는 방법을 고안하고 구현한다. 캐필러리 다이로부터의 토출물을 영상화하여, 회색음영으로 정량화하였다. 그 음영도를 기반으로 하여, 색교체도를 결정하였다. 주어진 온도와 토출 속도에서, 색교체도가 토출회수에 따라 변화하는 추이를 얻어 내고 분석하였다.

• 한국응용곤충학회지
• /
• 제47권1호
• /
• pp.101-105
• /
• 2008

딸기잎선충의 피해를 방지하기 위하여, 딸기잎선충에 감염된 딸기 모주를 정식 직전에 살선충제에 침지 처리하여 토양에 정식하고 이들로부터 발생되는 자묘의 딸기잎선충 감염 정도를 조사하였다. 처리는 살선충제 ethoprophos 5% 입제와 fosthiazate 5% 입제를 토양(3 Kg a.i./ha), 살선충제-냉탕침법(2.5 g a.i./liter, $20^{\circ}C$), 살선충제-온탕침 법(2.5 g a.i./liter, $46^{\circ}C$)으로 각각 처리하였으며, 그 효과를 무처 리, (무농약)온탕침법 및 diazinon 34% 유제(3.4 g a.i./liter) 엽면처리와 상호 비교하였다. 정식 100일후 조사시, fosthiazate-냉탕액 침지 처리구의 자묘는 무처리에 비하여 감염률은 90% 낮고, 선충밀도는 98% 감소되어 가장 방제효율이 높았다. Fosthlazate-냉탕액 침지 처리구의 자묘의 수와 무게도 무처리에 비하여 거의 2배 많았다. 살선충제 2종중에서는 fosthiazate가 ethoprophos보다 방제 효과가 좋았다. Diazinon 엽면 살포 처리와 기존의 온탕침법은 정식 초기에만 딸기잎선충 밀도 억제 효과를 보였다. 딸기 모주 살선충제 침지법은 방제 효율이 높고, 딸기 생산은 모주에서 발생된 자묘를 이용하여 다음해에 이루어짐으로 농약 잔류의 위험도 없다.

• Design & Manufacturing
• /
• 제2권5호
• /
• pp.30-33
• /
• 2008

Injection Molding is the most effective process for mass production of plastic parts. The injection molding process is composed with several steps such as Filling, Packing, Holding, Cooling, Ejecting. Among them, filling and packing process should be considered carefully to improve accuracy of dimension, surface quality of plastic parts. Usually the quality above-mentioned is managed with weight of part after molding on the field. In this paper, a series of experiment for molding automotive front bumper was conducted with cavitity temperature sensor to optimize switch-over time(V-P switching), hot runner vale gate sequence time during filling and packing step for the purpose of uniform quality, weight at every molding. As a result, it was found that it is effective method to use temperature sensor in injection molding for quality control of plastic molding.

• Design & Manufacturing
• /
• 제8권1호
• /
• pp.40-44
• /
• 2014

As a rotating machine element, plastic gears are more and more widely used in such as industrial machine element, since plastic gear is lighter, higher wear-resistance, and higher vibration absorbing ability than metal gears. When operating plastic parts, tooth breakage and fatigue life shortened due to increasing number of applying load and tooth flank temperature rising, such that accuracy of plastic gears is divided from allowable range to cause vibration and noise. On this study, a internal plastic gears are developed which improved the filling balance molding process by a new injection mold structure. The new mold structure called HR3P(hot runner type 3plate mold). As the result from this studies, we obtained a very accurate roundness internal gears by using design of experiment.

• Tribology and Lubricants
• /
• 제22권4호
• /
• pp.173-181
• /
• 2006

In the present study, we developed a numerical analysis software to predict performance of tilting-pad thrust bearings. The finite element method was adopted to compute lubricant film pressure and temperature. Three-dimensional heat transfer equations were solved simultaneously for the lubricant film, pad, and runner. Groove temperature was assumed with two different models. From application of the software to a thrust bearing, it has been seen that the three-dimensional analysis predicts higher temperature than the average temperature analysis. It has also been found that the groove model with a hot-oil-carry-over factor predicts higher temperature.