• The Plant Pathology Journal
• /
• 제26권4호
• /
• pp.372-379
• /
• 2010

Macrophomina phaseolina causing charcoal rot was isolated from sesame seeds (cvs. Giza 32 and Shandawel-3) collected from different localities of Assiut, Sohage and El-Minia Governorates. The fungus was found in the highest frequently in samples collected from Assiut Governorate followed by Sohag and finally EL Minia Governorate. The obtained isolates were different in their virulence on the tested sesame cvs. Also, they differed in their growth nature including colony color and sclerotial production. The color of colonies of the pathogen seem to be correlated with density of sclerotial formation. Aqueous extracts of Majorna, Wild chamomile, Geranium oil and Nees plants were highly toxic to tested isolates of M. phaseolina, in vitro. On the other hand the rest of the tested aqueous extracts had no effect. Under greenhouse conditions in 2005 and 2006 seasons, soaking seeds of sesame before sowing in aqueous extracts of Eucalyptus, Nerium, Ocimum and Roesmary plants decreased the disease incidence. Aqueous extracts of Eucalyptus and Ocimum were the most effective treatment. Dipping sesame seeds in hot water at $60^{\circ}C$ for 5 minutes increased seed germination of Giza 32 and Shandawel-3 cvs. followed by $55^{\circ}C$, $50^{\circ}C$ and $45^{\circ}C$, while $40^{\circ}C$ treatment resulted the lowest seed germination rate. Dipping sesame seeds in hot water at different temperature before planting decreased seed, seedling and charcoal rots. Soaking seeds in hot water at $60^{\circ}C$ increased greatly plant height and decreased seed, seedling rot and charcoal rot followed by $55^{\circ}C$ and $50^{\circ}C$, under greenhouse condition.

• 한국표면공학회지
• /
• 제36권5호
• /
• pp.364-372
• /
• 2003

In continuous galvanizing process, dissolution of iron into molten zinc results in a fairly great amount of dross. In order to decrease dross, the amount of dissolved iron of strip in molten zinc was investigated in the range of 0∼0.22%Al content, 440∼$470^{\circ}C$ strip temperature and 3∼60 sec dipping time. Uniform Fe-Al-Zn inhibition layer was formed in the coating layer/strip interface not only in the grain boundary but also in the grain of substrate with the increase of Al content in the zinc pot, while the amount of iron dissolution was decreased. Inhibition layer was unstable as the dipping time and strip temperature increased and the amount of iron dissolution increased.

• 한국표면공학회지
• /
• 제53권3호
• /
• pp.95-103
• /
• 2020

In this study, the material used in the hot dip galvanizing equipment was poorly corrosion-resistant, so it was performed to solve the cost and time problems caused by equipment replacement. The theoretical calculation was performed using the DV-Xα method(Discrete Variational Local-density approximation method). The alloy (STS4XX series) of the equipment currently used has a martensite phase. Therefore, the theoretical calculation was performed by applying P4 / mmm, which is a tetragonal structure. The new alloy was chosen by designing theoretical values close to existing materials. Considering elements that contribute to corrosion, most have high prices. Therefore, the design was completed by adjusting the content using only the components of the reference material in the theoretical design. The final design alloys were chosen as D6 and D9. Designed D6 and D9 were dissolved and prepared using an induction furnace. After the heat treatment process was completed, the corrosion rate of the alloys was confirmed by using the potentiodynamic polarization test. The surface of the prepared alloys were processed horizontally and then polished to # 1200 using sand paper to perform potentiodynamic polarization test. Domestic products: 4.735 mpy (mils / year), D6: 0.9166 mpy, D9: 0.3372 mpy, alloys designed than domestic products had a lower corrosion rate. Therefore, the designed alloy was expected to have better erosion resistance.

• Advances in Traditional Medicine
• /
• 제2권2호
• /
• pp.101-105
• /
• 2002

A battery of neuropharmacological experiments showed the hot water extract of Ocimum sanctum Linn. (Labiateae) had a depressant effect on the central nervous system (CNS), but the aqueous extract showed no effect on it. The hot water extract reduced the spontaneous locomotor activity, exploratory head dipping, propulsive locomotion and exploratory ambulation as well as prolonged the pentobarbital induced sleeping time. The depressant effect starts from 60 minutes after the drug administration and continued to 180 minutes. The drug may exert central depressant effect by interfering with the function of the cortex.

• Advances in Traditional Medicine
• /
• 제6권1호
• /
• pp.34-38
• /
• 2006

The hot water extract of the seeds of Vernonia anthelmintica Kuntze (Compositae) in a dose of 10 ml/kg body weight of mice, showed significant analgesic activity on the hot plate analgesic method throughout the 4 h experimental period. The hole cross scores and the climbing out scores are of lower than the control animals. The hot water extract reduced the defecation in hole board study and significantly reduces the exploratory ambulation and head dipping behaviour. The seed also showed significant depressant activity on the exploratory ambulation of the open field scores. The drug decreased the spontaneous locomotion activity on brick-chip displacement method up to 45 min and also showed the ability to lessen the amphetamine induced hyperactivity up to 20 min. But it didn't show any effect on pentobarbital induced sleeping time test. The extract reduced gastrointestinal motility.

• 한국표면공학회지
• /
• 제48권3호
• /
• pp.110-114
• /
• 2015

The effect of hot-dip aluminizing on the corrosion of the low carbon steel was studied at $650-850^{\circ}C$ for 20-50 h in $N_2/0.5%\;H_2S$ gas. The aluminized steel consisted primarily of the Al topcoat and the underlying Al-Fe alloy layer. Aluminizing drastically improved the corrosion resistance by forming the ${\alpha}-Al_2O_3$ surface scale. Without aluminizing, the steel formed nonadherent, fragile, thick scales, which consisted of FeS as the major phase and iron oxides such as FeO, $Fe_3O_4$ and $Fe_2O_3$ as minor ones.

• Journal of Welding and Joining
• /
• 제32권6호
• /
• pp.75-81
• /
• 2014

Usage of heavy metal element (Pb, Hg and Cd etc.) in electronic devices have been restricted due to the environmental banning of the European Union, such as WEEE and RoHS. Therefore, it is needed to develop the Pb-free solder plated ribbon in photovoltaic (PV) module. This study described that degradation characteristics of PV module under damp heat (DH, $85^{\circ}C$ and 85% R.H.) condition test for 1,000 h. Solar cell ribbons were utilized to hot dipping plate with Pb-free solder alloys. Two types of Pb-free solder plated ribbons, Sn-3.0Ag-0.5Cu (SAC305) and Sn-48Bi-2Ag, and an electroless Sn-40Pb solder hot dipping plated ribbon as a reference sample were prepared to evaluate degradation characteristics. To detect the degradation of PV module with the eutectic and Pb-free solder plated ribbons, I-V curve, electro-luminescence (EL) and cross-sectional SEM analysis were carried out. DH test results show that the reason of maximum power (Pm) drop was mainly due to the decrease fill factor (FF). It was attributed to the crack or oxidation of interface between the cell and the ribbon. Among PV modules with the eutectic and Pb-free solder plated ribbon, the PV module with SAC305 ribbon relatively showed higher stability after DH test than the case of PV module with Sn-40Pb and Sn-48Bi-2Ag solder plated ribbons.

• 열처리공학회지
• /
• 제25권6호
• /
• pp.283-291
• /
• 2012

In order to increase the anti-oxidation property during the tailor welding blanked hot press forming process for a high strength boron steel sheet, we performed a different coating method on the boron-steel sheet such as 87% Al - 13% Si and Fe - 8.87 Zn dipping plating procedure. However, during laser welding process, the Al-Si coated steel sheet has showed a low tensile strength and about half value of elongation than the original boron-steel sheet. Aluminum and silicon, elements of coating layer were diffused into the boron-steel matrix and have shown a low strength result than non-coated specimen. On the other hand, Zinc-coated boron-steel has expectedly showed a excellent tensile strength and micro-harness value in the welded area like original boron-steel.

• 화훼연구
• /
• 제18권2호
• /
• pp.93-97
• /
• 2010

본 연구는 기내에서 재생된 오리엔탈나리 'Casa Blanca'와 'Siberia' 소인경의 새로운 휴면 타파방법을 모색하고자 생장조절물질을 첨가한 온탕처리 조건을 검토하였다. 오리엔탈나리 'Casa Blanca'와 'Siberia' 두 품종 모두 $30^{\circ}C$ 증류수, 120분 온탕처리에서 맹아소요일수는 단축되었으나 맹아율이 낮았다. $GA_{4+7}$ $100mg{\cdot}L^{-1}$용액을$35^{\circ}C$ 에서 1시간 온탕 처리에 의해서 'Casa Blanca'와 'Siberia'의 맹아율은 각각 76.7%으로 크게 촉진되었고 정식 2년차의 생장과 구근 비대가 촉진되었으며, 휴면에 따른 호흡정도를 반영하는 미토콘드리아 단백질 함량과 fumarase 활성도 높아 휴면타파의 생리적 원인도 구명하였다. 생장조절물질($GA_{4+7}$)을 첨가한 온탕처리에 의해 기내에서 재생된 오리엔탈나리 소인경의 휴면을 효과적으로 타파할 수 있었다.

• 농업생명과학연구
• /
• 제45권6호
• /
• pp.151-162
• /
• 2011

점박이응애(Tetranychus urticae)에 대한 살비활성을 가지는 물질을 알아보기 위하여 약용식물 25과 35종의 메탄올 또는 헥산 추출물을 이용하여 잎 침지법과 살포법으로 실내와 pot, 야외에서 실험을 수행하였다. 살비활성은 약용식물 종류별로 차이를 보였다. 강남콩(Phaseolus vulgaris var. humilis) 잎을 1,000 ppm 농도의 추출물에 1분간 침지한 후 점박이응애에 대한 치사율을 조사한 결과, 비자나무(Torreya nucifera) 열매 추출물과 팥꽃나무(Daphne genkwa)와 도꼬마리(Xanthium strumarium), 나팔꽃(Pharbitis nil) 씨앗 추출물이 각각 56.8%와 47.8, 47.7, 47.7%의 살비활성을 나타내었다. 잎 침지시간을 30초로 단축시켜 점박이응애에 대한 살비효과검정 시는 1분 침지에 비하여 효과가 감소하였고, 나팔꽃과 도꼬마리의 살비 활성이 가장 높았다. 도꼬마리와 나팔꽃 씨앗 헥산 추출물의 반수치사농도는 각각 1,824 ppm과 1,899 ppm이었다. 두 식물의 1,000 ppm 온수 및 냉수 추출물은 점박이응애에 대한 살비효과가 20% 이하로 낮았다. Pot의 강낭콩에 점박이응애를 접종한 후 분무법으로 추출물을 1,000 ppm 농도로 살포한 결과 도꼬마리와 나팔꽃 씨앗 헥산추출물은 각각 76.3과 71.3%의 높은 살비활성을 나타내었다. 그리고 온실에서 국화의 점박이응애를 대상으로 나팔꽃 씨앗 헥산 추출물을 2,000 ppm과 1,000 ppm으로 처리 시에는 50.8%와 35.1%의 방제가를 보였다.