• 한국세라믹학회지
• /
• 제55권4호
• /
• pp.352-357
• /
• 2018

The slip casting process is widely used to make green bodies from ceramic slips into dense compacts with homogeneous microstructure. However, stress may be generated inside the green body during drying, and can lead to cracking and bending during sintering. When starting from the spherical powders with mono-size distribution to make the close packed body, interstitial voids on octahedral and tetrahedral sites are formed. In this research, experiments were carried out with powders of three size types (host powder (H), octahedral void filling powder (O) and tetrahedral void filling powder (T)) controlled for average particle size by milling from two commercial alumina powders. Slips were prepared using three different powder batches from H only, H+O or H+O+T mixed powders. After manufacturing green compacts by solid-casting, compacts were dried at constant temperature and humidity and sintered at $1650^{\circ}C$. Alumina samples fabricated from the multi-sized powder mixture had improved compacted and sintered densities.

• 한국재료학회지
• /
• 제33권10호
• /
• pp.385-392
• /
• 2023

A solution combustion process for the synthesis of hollandite (BaAl₂Ti₆O₁₆) powders is described. SYNROC (synthetic rock) consists of four main titanate phases: perovskite, zirconolite, hollandite and rutile. Hollandite is one of the crystalline host matrices used for the disposal of high-level radioactive wastes because it immobilizes Sr and Lns elements by forming solid solutions. The solution combustion synthesis, which is a self-sustaining oxi-reduction reaction between a nitrate and organic fuel, generates an exothermic reaction and that heat converts the precursors into their corresponding oxide products in air. The process has high energy efficiency, fast heating rates, short reaction times, and high compositional homogeneity. To confirm the combustion synthesis reaction, FT-IR analysis was conducted using glycine with a carboxyl group and an amine as fuel to observe its bonding with metal element in the nitrate. TG-DTA, X-ray diffraction analysis, SEM and EDS were performed to confirm the formed phases and morphology. Powders with an uncontrolled shape were obtained through a general oxide-route process, confirming hollandite powders with micro-sized soft agglomerates consisting of nano-sized primary particles can be prepared using these methods.

• Transactions on Electrical and Electronic Materials
• /
• 제14권3호
• /
• pp.121-124
• /
• 2013

The incorporation of 90 nm alumina particles into an epoxy matrix to form a composite microstructure is described in present study. It is shown that the use of ultrafine particles results in a substantial change in the behavior of the composite, which can be traced to the mitigation of internal charges when a comparison is made with conventional $Al_2O_3$ fillers. A variety of diagnostic techniques have been used to augment pulsed electro-acoustic space charge measurement to provide a basis for understanding the underlying physics of the phenomenon. It would appear that, when the size of the inclusions becomes small enough, they act cooperatively with the host structure and cease to exhibit interfacial properties. It is postulated that the $Al_2O_3$ particles are surrounded by high charge concentrations. Since $Al_2O_3$ particles have very high specific areas, these regions allow limited charge percolation through $Al_2O_3$ filled dielectrics. The practical consequences of this have also been explored in terms of the electric strength exhibited. It would appear that there was a window in which real advantages accumulated from the nano-formulated material. An optimum filler loading of about 0.5 wt.% was indicated.

• 한국전기전자재료학회논문지
• /
• 제17권11호
• /
• pp.1212-1217
• /
• 2004

Red organic electroluminescent (EL) devices based on tris(8-hydroxyquinorine aluminum) (Alq$_3$) doped with red emissive materials, 4-(dicyanomethylene)-2-t-butyl -6-(l,1,7,7-tetramethyljulolidyl-9-enyl)4H-pyran (DCJTB). poly(3-hexylthiophene) (P3HT). rubrene and 4-dicyanomethylene-2-methyl-6[2-(2,3.6.7-tetrahydro-lH,5H-benzo-[i,j]quinolizin-8yl)vinyl]-4H-pyran (DCM2) were fabricated for applying to the red light source, The photoluminescence (pL) intensities of red emissive materials doped in Alq$_3$ are limited by the concentration quenching with increasing the doping ratio and the doping concentration of DCJTB, DCM2, P3HT and rubrene measured at the maximum intensity showed 5, 1, 0.5 and 2 wt%, respectively. Time-resolved PL dynamic results showed that the PL lifetime of red emissive materials doped in Alq$_3$ were increased more than the value of material itself. It means that the efficient energy transfer occurred in the mixed state and Alq$_3$ is a suitable host materials for red emissive materials, The device which was used DCJTB as a dopant achieved the best result of the maximum luminance of 594 cd/$m^2$ at 15 V and showed the chromaticity coordinates of x=0,624, y=0,371.

• 지구물리와물리탐사
• /
• 제24권4호
• /
• pp.194-201
• /
• 2021

유도분극 효과는 지층 내 광물입자와 공극수 사이 계면에서의 전기화학적인 반응에 의해 발생하는 것으로 알려졌다. 광대역 유도분극 탐사는 다중 진동수의 교류전류를 지하로 송신할 때 측정되는 위상과 전기비저항 스펙트럼으로부터 지층 내 이상 구간을 파악하는 전기탐사 기술이다. 이 기술은 다양한 광물탐사에서 효과적으로 적용되고 있다. 경기도 포천시 관인면 고남산 일대에는 티탄철광석을 개발하는 광산이 운영되고 있다. 이 광석에는 0.4% 이상의 바나듐을 함유하고 있어서 함바나듐 티탄철광상으로 분류된다. 바나듐은 바나듐 레독스 흐름전지의 핵심원료이고, 이 전지는 대용량 에너지 저장시설에 적합한 것으로 알려졌다. 신규 잠두광체의 부존 여부를 파악하고, 잠재 자원량을 산정하기 위하여 체계적인 광물탐사가 이뤄졌다. 물리탐사에서 노두와 시추코어 시료를 이용한 실내 암석 물성 측정결과는 현장자료부터 신뢰할 수 있는 물성 모델을 생성하는데 도움이 된다. 따라서 이 연구는 함바나듐 티탄철광상의 광석과 주변암석사이의 유도분극 특성 차이를 이해하고, 이를 바탕으로 광대역 유도분극의 VTM 광상 탐사 적용성을 파악하고자 실내 광대역 유도분극 연구를 수행했다. 연구결과 갱도와 시추코어에서 확인한 광석의 위상과 전기비저항 스펙트럼 형상은 몬조섬록암과 석영 몬조섬록암으로 이루어진 주변모암의 스펙트럼 형상과 확연하게 달랐다. 암석의 유도분극 특성은 주로 100 Hz 이하의 진동수에서 반응 차이를 가지게 만든다. 이 진동수 영역에서 광석과 주변 암석의 평균 위상과 평균 전기비저항을 계산했다. 가장 낮은 진동수인 0.1 Hz 진동수에서 광석의 평균 위상은 -369 mrad, 주변 암석은 -39 mrad 이었다. 같은 진동수에서 광석의 평균 교류 전기비저항은 16 Ωm, 주변 암석은 2,623 Ωm이었다. 광석의 실내 광대역 유도분극 특성은 주변 암석과 상당한 차이가 나므로 광대역 유도분극 탐사가 함바나듐 티탄철광상 광물탐사에 효과적으로 적용할 수 있고, 이러한 특성은 현장 탐사 자료를 해석하는 데 도움이 될 것으로 판단된다.

• Conservation and Restoration of Cultural Heritage
• /
• 제1권1호
• /
• pp.29-37
• /
• 2012

The West Stone Pagoda at Gameunsaji Temple Site constructed in the 7th century is mainly composed of dark grey dacitic tuff bearing small numerous dioritic xenoliths. These xenoliths resulted in small holes due to differential weathering process from the host rocks. Physical strength of the pagoda was decreased due to weathering and damage caused by petrological, biological and coastal environmental factors. The southeastern part of the pagoda was extremely deteriorated that the rock surface showed exfoliation, fracture, open cavity, granular decomposition of minerals and salt crystallization by seawater spray from the eastern coast. The stone blocks were intersected by numerous cracks and contaminated by subsequent material such as cement mortar and iron plates. Also, the pagoda was colonized by algae, fungi, lichen and bryophytes on the roof rock surface and the gaps between the blocks. As a result of ultrasonic test, the rock materials fell under Highly Weathered Grade (HW) or Completely Weathered Grade (CW). Thus, conservational intervention is essentially required to prevent further weakening of the rock materials.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제12권3호
• /
• pp.57-62
• /
• 1990

Many alloplastic materials have been used as the bony substitute in large bony defects caused by fracture, periodontitis, & cyst, etc. Nowadays Hydroxyapatite(HAP) is the most usable material as the bony substitute. The reasonable properties of HAP are nontoxic, biocompatible to host tissues & have osteoconductivity. Other bioceramic materials are recommended as the bony substitute with high success rate. We have studied the clinical use of HAP as the bony substitute in the defected area caused by cyst. The reasonalbe & successful results are obtained. The results were as followed. 1. Better prognosis was obtained in the case of HAP & bone mixed graft than HAP graft only. And the best prognosis was obtained in the case of iliac bone graft. 2. Better prognosis was obtained in Mx. than in Mn. 3. It seems that the soft tissue ingrowth into the HAP granule play an important role in the success of the HAP graft. 4. Though the flap covering the HAP granules was perforated, the relative good prognosis was obtained by re-suturing the perforeated site.

• Bulletin of the Korean Chemical Society
• /
• 제23권1호
• /
• pp.35-40
• /
• 2002

Photoreaction of guest organic anions in layered organic-inorganic hybrid materials was investigated. The layered hybrids were synthesized by an anion-exchange reaction of $[LiAl_2(OH)_6]Cl{\cdot}yH_2O$ layered double hydroxide with aqueous (Z,Z)- and (E,E)-muconates under inert atmospheric condition, to give new organicinorganic hybrids of $[LiAl_2(OH)_6]_2[(Z,Z)-C_6H_4O_4]{\cdot}zH_2O$ and $[LiAl_2(OH)_6]_2[(E,E)-C_6H_4O_4]{\cdot}H_2O$, respectively. The basal spacings calculated by XRPD of intercalates indicate that muconate anions have almost vertical arrangements against the host $[LiAl_2(OH)_6]^+$ lattices in the interlayer of organic-inorganic hybrid materials. When UV light was irradiated on the suspension of $[LiAl_2(OH)_6]_2[(Z,Z)-C_6H_4O_4]{\cdot}zH_2O$, the (Z,Z)-muconate anions of the gallery space of hybrids were polymerized in the aqueous media while it was isomerized into more stable (E,E)-muconate in the methanollic suspension in the presence of catalytic amount of molecular iodine. All the products were characterized using elemental analysis, TGA, XRPD, FT-IR, $^1H$ NMR and $^{13}C$ CP-MAS NMR.

• The Plant Pathology Journal
• /
• 제16권4호
• /
• pp.227-230
• /
• 2000

A total of 90 isolates of Fusarium oxysporum f.sp. melonis, the causal agent of oriental melon (Cucumis melo var. makuwa) wilt, was isolated from symptomatic tissues of oriental melon from 4 provinces in Korea. These isolates were grouped into vegetative compatibility groups (VCGs) by demonstrating heterokaryosis through complementation using nitrate nonutilizing (nit) mutants. No self-incompatibility was observed in any of isolates. All isolates were grouped into 3 VCGs ; A, B, and C. iSOLATES BELONGING TO VCG A and VCG B accounted for 87% and 91% of the fungal population collected in 1991 and 1993, respectively. As the increment of cultivation period in the same field, the proportion of isolates belonging to VCG B increased whereas that of isolates belonging to VCG A decreased. Mean virulence of a total population increased as the increment of cultivation period in the same field. Isolates belonging to VCG B showed the highest increment of virulence. These data suggest that replanting of a host plant in the same field may cause increase of virulence in the pathogens. Furthermore, virulence of F. oxysporum f.sp. melonis isolates is related to the VCGs.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 춘계학술발표강연 및 논문개요집
• /
• pp.218-218
• /
• 2003

21세기 정보기반사회에서는 정보처리량의 증가로 인한 대용량 정보 교환을 위하여 신호처리의 고속화/광대역화가 요구되어진다. 완전 광통신망의 구축에 의한 대용량의 광통신을 위해서는 고속이며, 집적화가 가능한 저가의 광전자 소자 개발이 필요하다. 광전자 소자 중 전기-광학 변조 효과를 이용한 광소자의 구현을 위한 소재로서 극성 배향된 비선형 광학 유기고분자 소재는 가공성이 뛰어나 원하는 형태의 광도파로로 제조할 수 있다는 장점에 많은 연구가 진행되고 있다. 그러나 아직 전기광학계수의 향상과 더불어 유기고분자가 가지고 있는 열 및 광화학적 안정성이 낮은 기본적인 문제점과 폴링(poling)에 의해 배향된 극성이 시간에 따라 완화되는 문제의 해결이 요구되고 있다. 이러한 문제점 해결을 위한 기초 연구로 유기물을 졸-겔 매트릭스에 나노 사이즈로 분산하는 방법으로 유기물의 내화학적 안정성을 향상하고자 시도하였다. 잘 알려져 있는 바와 같이 유/무기 하이브리드 졸-겔 재료는 광 투광성이 우수하고 저온에서의 재료 합성과 저가 공정이 가능하여 광기능성 유기물의 호스트(host) 재료로 많이 연구되고 있다. 본 연구에서는 MTMS(methyltrimethoxysilane)과 TEOS (tetra-ethoxyorthosilicate)를 0-100 mol%로 혼합하고 가수분해하는 방법으로 친수성/친유성 특성을 제어하여, 분산되는 유기물의 사이즈를 조정하였다. 각 실험 조건에 따른 유기물 분산체의 크기를 SEM 및 TEM으로 관찰하였으며, 나노 사이즈로 분산된 유/무기 졸-겔 코팅막의 광학적 특성을 프리즘 커플러를 이용하여 조사하였다.