• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.2010-2012
• /
• 2005

Activated carbon was activated with chemical treatment to attain high surface area with porous structure. We have been considered activated carbon is the ideal material for high voltage electric double layer capacitor due to their high specific surface area, good conductivity and chemical stability. In this study we found that increase in electrochemical capacitance due to activated carbon. Also chemically activated carbon and water treatment have resulted larger capacitance and also exhibits better electrochemical behavior, and is about 15% more than in untreated state. The structural change in activated carbon through chemical treatment activation was investigated by using SEM and XRD. In this study, the dependence of the activation behavior with KOH in the micro structure of host materials will be discussed. Furthermore, the relation to the electric double layer capacitance, especially the specific capacitance per unit area, is also discussed.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.6
• /
• pp.531-535
• /
• 2007

To invest the luminescent characteristics of red light emitting OLED device, a dual dopant system was incorporated into the emitting layer. The multiple layer OLED device structure was $ITO(1500\;{\AA})/HIL(200\;{\AA})/a-NPD(600\;{\AA})/EML(300\;{\AA})/Alq_3(200\;{\AA})/LiF(7\;{\AA})/Al(1800\;{\AA})$. The concentrations of the rubrene dopant were tested at 0 vol.%, 3 vol.%, 6 vol.% and 9 vol.%. The maximum device efficiency and life time were obtained at the rubrene dopant concentration of 6 vol.%. Emission spectrum and color coordinate of devices showed no relationship with rubrene dopant concentration. Experiment results show that rubrene dopant absorbs energy from $Alq_3$ host and transfer it to RD1 dopant acting as an energy intermediate and influencing the device efficiency, finally the red light is emitted from the RD1 dopant.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2008.11a
• /
• pp.9-10
• /
• 2008

Triple layers structure of $SiO_2$/ZnS:Mn/ZnS was synthesized by using ion substitution and chemical precipitation method. Each layer thickness was controlled by adjusting the concentration of manganese (II) acetate ($Mn(CH_3COO)_2$) and tetraethyl orthosilicate (TEOS). The structure and morphology of prepared phosphors were investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM) and electron probe microscopic analyzer (EPMA). Photoluminescence (PL) properties of ZnS with different layer thickness and amount of Mn activator were analyzed by PL spectrometer. PL emission intensity and PL stability were analyzed for evaluating effects of Mn activator.

• International Journal of Computer Science & Network Security
• /
• v.22 no.6
• /
• pp.83-90
• /
• 2022

Traditional Cloud Computing would be unable to safely host IoT data due to its high latency as the number of IoT sensors and physical devices accommodated on the Internet grows by the day. Because of the difficulty of processing all IoT large data on Cloud facilities, there hasn't been enough research done on automating the security of all components in the IoT-Cloud ecosystem that deal with big data and real-time jobs. It's difficult, for example, to build an automatic, secure data transfer from the IoT layer to the cloud layer, which incorporates a large number of scattered devices. Addressing this issue this article presents an intelligent algorithm that deals with enhancing security aspects in IoT cloud ecosystem using butterfly optimization algorithm.

• Economic and Environmental Geology
• /
• v.57 no.4
• /
• pp.387-396
• /
• 2024

The geological disposal of high-level radioactive waste (HLW) involves permanently isolating the wastes in stable geological formations deep underground. Mudstone (siltstone and claystone) containing abundant clay minerals is proposed as a host rock for geological disposal of HLW because clay minerals have low permeability and high ion sorption/exchange capacity. Despite the widespread occurrence of sedimentary basins in Korea, there is a lack of evaluation of mudstone as host rocks for geological disposal. In this study, we utilized the JBH-1 borehole (7-754 m) obtained from the Jinju Formation to investigate the distribution trend and mineral compositions of mudstone. Additionally, we conducted comparative analyses with the Opalinus Clay in Switzerland considered as host rock of geological disposal of HLW. Claystone containing more than 40% clay minerals exhibit thick layers primarily in the upper section (7-350 m) of the JBH-1 borehole. While the clay minerals content of claystone does not show significant variation with depth, there are differences in the characteristics of feldspar and carbonate minerals. These mineralogical variations can led change in pore water chemistry and rock mechanical properties. The clay minerals content of claystone in the Jinju Formation is similar to that of the Opalinus Clay. However, there are notable differences in clay minerals composition. While the Opalinus Clay contains smectite-illite mixed-layer minerals, the Jinju Formation are dominated by illite indicating higher burial temperatures. This information will be useful for studying the host rock of HLW geological disposal site in Korea.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.4 s.334
• /
• pp.7-14
• /
• 2005

Earlier researches have typically concentrated on discovering IP network topology, which implies that the connectivity of all Ethernet devices is ignored. But automatic discovery of Physical topology Plays a crucial role in enhancing the manageability of modem Metro Ethernet mesh networks due to the benefits of Ethernet services, including: Ease of use, Cost Effectiveness and flexibility. Because of proprietary solutions targeting specific product families and related algorithm which depends on Layer 2 forwarding table information it is impossible to discover physical topology in the Ethernet mesh networks. To cope with these shortcomings, in this paper we propose a novel and practical algorithmic solution that can discover accurate physical topology in the Ethernet mesh networks. Our algorithm divides the Ethernet mesh networks into bridged networks and host networks and those bridges located in boundary are named edge bridges. Our algorithm uses the standard spanning tree protocol MIB information for the bridged networks and uses the standard Layer 2 forwarding table MIB information for the host networks. As using the standard MIB information to discover physical topology we can offer interoperability guarantee in the Ethernet mesh networks composed of the various vendors' products.

• Journal of the Semiconductor & Display Technology
• /
• v.8 no.4
• /
• pp.15-19
• /
• 2009

A high efficient organic red light emitting device with structure of DNTPD/TAPC/$Bebq_2$ :[$(pq)_2Ir(acac)$, SFC-411]/SFC-137 was fabricated on the plastic substrate, which can be applied in the fields of flexible display and illumination. In the device structure, N,N'-diphenyl-N,N'-bis-[4-(phenyl-m-tolylamino)-phenyl]-biphenyl-4,4'-diamine[DNTPD] as a hole injection layer and 1,1-bis-(di-4-tolylaminophenyl) cyclohexane [TAPC] as a hole transport were used. Bis(10-hydroxybenzo[h]quinolinato) beryllium complex [$Bebq_2$] was used as a light emitting host material. The host material, $Bebq_2$ was doubly doped with volume ratio of 7% iridium(III)bis-(2-phenylquinoline)acetylacetonate[$(pq)_2$Ir(acac)] and 3% SFC-411[red phosphor dye coded by the proprietary company]. And then, SFC-137 was used as an electron transport layer. The luminous intensity and current efficiency of the fabricated device were $22,780\;cd/m^2$ at 9V and 17.3 cd/A under $10,000\;cd/m^2$, respectively. The maximum current efficiency of the device was 22.4cd/A under $580\;cd/m^2$.

• Korean journal of applied entomology
• /
• v.51 no.3
• /
• pp.215-222
• /
• 2012

Pupation site selection behavior of Plodia interpunctella (H$\ddot{u}$bner) in response to its larval parasitoid, Bracon hebetor Say, was evaluated. Under the presence of the parasitoid, more moth larvae pupated in a layer deeper than 5 mm. Because the parasitoid searched for the host mostly in the surface layer (< 5 mm), larvae in deeper layers were able to successfully escape attack by the parasitoid. However, this behavior did not affect the numerical response of the parasitoid. The parasitoid laid more eggs per host larvae when the number of attacked larvae decreased.

• Journal of KIISE:Information Networking
• /
• v.29 no.3
• /
• pp.242-252
• /
• 2002

When a Mobile IP handoff occurs, the packets in flight can be lost because they are tunneled based on out-of-date location information. In this parer, we propose an enhanced handoff protocol that achieves no packet loss during Mobile IP handoff over a wireless LAN. Our handoff protocol predicts the next foreign agent that a mobile host is to visit by using: the information from the data link layer of wireless LAN. After that, when a Mobile IP handoff occult, the current foreign agent forwards the packets destined to a mobile host to the predicted foreign agent which buffers them. This eliminates packet loss and reduces the packet forwarding delay. Our handoff protocol is simulated using the Network Simulator-2 (ns-2) and shows the substantial performance enhancement of TCP with much less overhead up to 6.2 times compared to standard Mobile IP.

• Korean Journal of Veterinary Service
• /
• v.22 no.4
• /
• pp.377-383
• /
• 1999

Polymorphonuclear (PMN) leucocytes are fundamental importance to the body's defense mechanism and play a major role in the local and systemic reactions to infectious disease. Investigation of the physiological and pathological role of the various leucocyte subtypes in host defence mechanisms is dependent upon the isolation of adequate numbers of viable, pure leucocyte fractions. This report describes the separate frequency of PMN leucocytes both from buffy coat layer and from packed RBC layer when bovine peripheral blood was treated with various anti-coagulants such as acid-citrate-dextrose(ACD), ethyldiaminetetraacetic acid(EDTA), sodium citrate and heparin. The separate frequencies of PMN leucocytes from buffy coat layer was 60.4$\pm$9.6%(heparin), 56.8$\pm$11.8%(sodium citrate), 30.6$\pm$14.1%(ACD) and 6.2$\pm$3.7%(EDTA), in order. Those from packed RBC layer monitored with EDTA, ACD, sodium citrate and heparin was 85.0$\pm$4.7%, 84.3$\pm$5.5%, 83.8$\pm$6.5% and 76.3$\pm$7.7%, respectively. The Ficoll-hypaque(FH) density gradient method was used to remove a small part of lymphocytes and/or monocytes from leucocytes in packed RBC layer. With the result that it increased separate frequency of PMN leucocytes from EDTA(89.9$\pm$2.4%), ACD(89.5$\pm$3.6%), and sodium citrate(83.6$\pm$10.3%) than heparin(68.4$\pm$13.9%). These results indicate that the use of EDTA and ACD as anticoagulant Is suitable for the separation of PMN leucocytes from bovine peripheral blood, and that the FH density gradient method is able to increase the separate frequency of PMN leucocytes from packed RBC layer.