• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.2024-2030
• /
• 2003

Design for a quite operation of fluid power system requires the understanding of noise and vibration characteristics of the system. This paper presents a dynamic response for design of hydraulic circuit. Experimental investigations on the attenuation characteristics of pressure ripple in automotive power steering hydraulic pipe with dynamic response of hydraulic pipe line is examined. Also, a mathematical model of hydraulic pipe is proposed to support design of the hydraulic circuit and analyze the attenuation characteristics of pressure ripples in a hydraulic pipe line. And analyze the impedance characteristics to determine the postion to construct accumulator for attenuation the pressure pulsation. The experimental results show that the pulsation attenuation characteristics of hydraulic hoses is remarkably affected by the flexible metal tube inserted coaxially inside a hydraulic hose with a finite length as well as viscoelastic properties of hose wall. It is also shown that the predicted results by the model proposed here agree well with the measured results over a wied range of frequency;

• 대한기계학회논문집A
• /
• 제34권11호
• /
• pp.1697-1703
• /
• 2010

유압호스는 건설기계, 자동차, 항공기 등 각종 기계의 유압장치에서 동력을 전달하기 위한 배관으로 사용된다. 산업의 전분야에서 에너지를 전달하기 위한 배관의 한 종류로서 진동이나 충격 등으로부터 시스템을 보호하는 역할을 한다. 여러 가지 외부 환경 조건으로부터 시스템을 유지하기 위해서는 호스 조립체에서 온도와 압력 등의 외부 환경 조건에 대한 내성을 가지고 있어야만 한다. 본 연구에서는 기존에 호스 조립체에 대해 온도 또는 압력 중 한 가지 인자를 고려한 가속모형을 제시한 연구는 있었지만 두 가지 인자를 동시에 고려한 가속모형은 제시하지는 못하였으므로, 호스 조립체의 압력과 온도를 모두 고려한 복합가속 모형식을 제안하는 것을 목적으로 한다.

• 한국정보전자통신기술학회논문지
• /
• 제14권5호
• /
• pp.369-374
• /
• 2021

최근에 건설되는 아파트는 주방이 빌트인 방식으로 만들어지므로 가스 호스가 싱크대 내부에 보이지 않게 만들어지므로 가스가 누출될 경우 싱크대 내부에 축적되어 가스 폭발로 이어질 수 있는 위험한 방식이다. 본 연구에서는 가스레인지와 중간밸브 사이에 연결된 호스가 싱크대 내부에 있어 가스 누출 검사를 할 수 없는 구조로 되어 있어 압력센서를 이용하여 가스누출을 검사를 쉽게 할 수 있는 밸브 시스템 연구하였다. 압력 측정 방법은 중간밸브와 가스레인지를 연결하는 호스의 압력을 측정하여 I2C통신 방식으로 데이터를 수집·분석 할 수 있도록 진행하였다. 또한 가정에 공급되는 가스압력계산은 대기압력에 가스계량기의 입구에서 가스게이지 압력 평균값 22.46mbar를 더 한 값으로 계산된 것에 대한 대기 압력 오차에 대한 규명 및 미세한 가스 누출 감지를 할 수 있도록 밸브 시스템을 개발하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.196-202
• /
• 1997

A reinforced hydraulic hoses,caiied a resonator hoses,with fixible metal tube are commonly used in automotive power steering hydraulic systems to attenuate and eliminate the objectionable fluid borne noise(pressure ripple) or vibration produced by a pump or steering gear. To achieve better nose attenuation in automotile vehicles, the investigations on propagation and attenuation characteristics of fluid borne pressure ripple in power steering hydraulic ciruit are required. So, this paper descibes a mathematical model of hydraulic hoses to support design the power steering hydraulic circuit and analyze the attenuation characteristics of flow and pressure ripples. The model is based on the transfer matrix approach. The experimental results show that the pulsation attenuation characteristics of hydraulic house is remarkably affected by the flexible metal tube inserted coaxially inside a hydraulic hose with a finite length as well as viscoelastic properties of house wall. It is also shown that the predicted results bymodel proposed here agree well with the measured results over a wide frequency range. These results will assist in the modeling and design of hydraulic hoses, and hear, should provide a means for designing a quieter automotive power steering hydraulic systems.

• 한국환경교육학회지:환경교육
• /
• 제7권1호
• /
• pp.18-29
• /
• 1994

This paper is to examine relative explaining power of socio-demographic variables, life style variables, environmental education, and environmental consciousness on the environmental behavior of housewives. Major results were as follows : As for life style, there different types such as socio-oriented, spare-life, fashion-oriented were examined. Spare-life style was most pervasive on Seoulite housewives. And spare-life style was emerged when housewives ages were old, education level was low, household income was low, hose type was Life-style were most influencing variables on environmental behavior. And environmental education was more powerful variables than environmental consciousness.

• Journal of Advanced Research in Ocean Engineering
• /
• 제3권3호
• /
• pp.102-111
• /
• 2017

This study considered the effects on the seabed of a harbor and quay wall from ship maneuvers in relation to the thruster jet flow and initial velocity. This study also included the engine capacity, RPM, and diameter and pitch of a ship's thruster for a required speed. The impact of a scour hole on the environment of a quay wall was investigated. Based on these results, a risk based analysis was conducted to evaluate different strategies and their consequences. There has been an increase in the loads on the bottom of a harbor during ship maneuvering. This increase is caused by the propeller loads of mooring and unmooring vessels. This indicates a greater number of arrivals and departures of vessels with larger drafts, larger thruster diameters, and larger available thruster power capacities. Another important cause could be an increase in the maneuverability of vessels from the use of bow thrusters. The increasing loads, which cause a higher jet flow above the bottom, can lead to undesirable scour holes.

• Journal of Biosystems Engineering
• /
• 제35권6호
• /
• pp.426-433
• /
• 2010

This study was conducted to develop a pull-type sprayer which performs the safe spraying with improved ergonomic postures while pesticide spraying of roses in floricultural facilities. The performance of the ergonomically designed sprayer was analyzed with a comparison of a conventional spray method. The pull-type sprayer, consisting of power pump, hose and nozzle parts was designed to manually pull and spray to upward and horizontal directions. From the analysis of postures with the RULA method, the labor load to arm and wrist using the pull-type sprayer was less than that with conventional power sprayer, so that the intensity of labor reduces. Working capacity with pull-type sprayer was two-fold greater than the conventional power sprayer. After performing pesticide spraying with the pull-type sprayer, the operating cost was reduced to \585,000/yr, which is 79% less than that of cost (\2,197,500/yr) for using conventional power sprayer.

• 드라이브 ㆍ 컨트롤
• /
• 제20권4호
• /
• pp.123-132
• /
• 2023

In disaster situations, to facilitate rapid drainage, electric underwater pumps are installed manually. This poses a high risk of electric shock accidents due to a short circuit, and a lot of time is required for hose connection and installation of electrical devices. To solve these problems, a Venturi pump using the venturi effect without external power is used. However, Venturi pumps that operate without external power make it difficult to install flow sensors such as electric devices; consequently, it is difficult to check the real-time flow rate. This paper proposes a flow estimation logic to replace the function of the flow sensor for the venturi pump . To develop the flow estimation logic, the flow characteristics of the venturi pump, according to the operating conditions, were checked. After that, the relationship with the flow rate of the venturi pump was defined using a pressure sensor corresponding to a low-cost sensor. Finally, an analysis of the estimation error was performed using the developed flow estimation logic.

• 한국안전학회지
• /
• 제25권5호
• /
• pp.7-14
• /
• 2010

Ultra high pressure system, which can be generally increased over 1,000bar, needs to have sealing mechanism to protect leakage and selection of the materials used in the intensifier. Components such as pressure vessel, hydraulic hose assembly, accumulator, hydraulic cylinder, hydraulic valve, pipe, etc., are tested under the impulse-pressure conditions. Components need to be tested under 1.5 to 3 times of rated pressure to check the tolerance even though rated pressure range of these components are not ultra high pressure. So, the ultra high pressure system needs to be equiped to test components. In this study, safety assessments of ultra high pressure system which are using failure analysis of components, changing the types of the control system, and finite element analysis with static condition, are investigated.

• 한국신뢰성학회:학술대회논문집
• /
• 한국신뢰성학회 2011년도 춘계학술발표대회 논문집
• /
• pp.281-288
• /
• 2011

Hydraulic hose assemblies deliver a fluid power in various oil pressure equipments such as construction machinery, automobile, aircraft, industrial machinery, machine tools, and machinery for ships, or they are used as pipes in oil pressure circuit. However, as the traditional measure for estimating life under the influence of various external factors incurs hardship in terms of time and expenses, it is essential to take accelerated life test by choosing the factor that suits the usage condition of the test object. The objective of the this study is to propose a acceleration model that takes both temperature and pressure without flexing condition into consideration. The life that is calculated by the equation for evaluating life and the test data show similar slopes as a result of comparing and analyzing the equation for evaluating life that is obtained in this research and the test data, which illustrates that they estimate life similarly, and the proposed equation is proved to be an accelerated life equation that presents the test results.