• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.28 no.6
• /
• pp.256-268
• /
• 2016

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2015. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering were carried out in the areas of flow, heat and mass transfer, cooling and heating, and air-conditioning, the renewable energy system and the flow inside building rooms. Research issues dealing with air-conditioning machines and fire and exhausting smoke were reduced. CFD seems to be spreading to more research areas. (2) Research works on heat transfer area were carried out in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the economic analysis of GHG emission, micro channel heat exchanger, effect of rib angle on thermal performance, the airside performance of fin-and-tube heat exchangers, theoretical analysis of a rotary heat exchanger, heat exchanger in a cryogenic environment, the performance of a cross-flow-type, indirect evaporative cooler made of paper/plastic film. In the area of pool boiling and condensing, the bubble jet loop heat pipe was studied. In the area of industrial heat exchangers, researches were performed on fin-tube heat exchanger, KSTAR PFC and vacuum vessel at baking phase, the performance of small-sized dehumidification rotor, design of gas-injection port of an asymmetric scroll compressor, effect of slot discharge-angle change on exhaust efficiency of range hood system with air curtain. (3) In the field of refrigeration, various studies were carried in the categories of refrigeration cycle, alternative refrigeration/energy system, system control. In the refrigeration cycle category, a cold-climate heat pump system, $CO_2$ cascade systems, ejector cycles and a PCM-based continuous heating system were investigated. In the alternative refrigeration/energy system category, a polymer adsorption heat pump, an alcohol absorption heat pump and a desiccant-based hybrid refrigeration system were investigated. In the system control category, turbo-refrigerator capacity controls and an absorption chiller fault diagnostics were investigated. (4) In building mechanical system research fields, eighteen studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, and renewable energies, piping in the buildings. Proposed designs, performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the user and location awareness technology applied dimming lighting control system, the lighting performance evaluation for light-shelves, the improvement evaluation of air quality through analysis of ventilation efficiency and the evaluation of airtightness of sliding and LS window systems. The subjects of building energy were worked on the energy saving estimation of existing buildings, the developing model to predict heating energy usage in domestic city area and the performance evaluation of cooling applied with economizer control. The studies were also performed related to the experimental measurement of weight variation and thermal conductivity in polyurethane foam, the development of flame spread prevention system for sandwich panels, the utilization of heat from waste-incineration facility in large-scale horticultural facilities.

• Food Science and Preservation
• /
• v.19 no.6
• /
• pp.799-806
• /
• 2012

This experiment was conducted to establish the optimum conditions for high $CO_2$ gas treatment in combination with a proper gas-permeable packaging film to maintain the quality of fig fruit (Ficus carica L). Among the fig fruits with different high $CO_2$ treatments, the quality change was most effectively controlled during storage in the 70%-$CO_2$-treated fig fruit. Harvested fig fruit was packaged using microperforated oriented polypropylene (MP) film to maintain the optimum gas concentrations in the headspace of packaging for the modified-atmosphere system. MP film had an oxygen transmission rate of about $10,295cm^3/m^2$/day/atm at $25^{\circ}C$. The weight loss, firmness, soluble-solid content (SSC), acidity (pH), skin color (Hunter L, a, b), and decay ratio of the fig fruits were monitored during storage at 5 and $25^{\circ}C$. The results of this study showed that the OPP film, OPP film + 70% $CO_2$, and MP film+70% $CO_2$ were highly effective in reducing the loss rate, firmness and decay occurrence rate of fig fruits that were packaged with them during storage. In the case of using treatments with packages of OPP film and OPP film+70% $CO_2$, however, adverse effects like package bursting or physiological injury of the fig may occur due to the gas pressure or long exposure to $CO_2$. Therefore, the results indicated that MP film containing 70% $CO_2$ can be used as an effective treatment to extend the freshness of fig fruits for storage at a proper low temperature.

• Food Science and Preservation
• /
• v.24 no.3
• /
• pp.351-360
• /
• 2017

We have studied the technology to extend the storage period of 'Seolhyang' strawberries using modified atmosphere package (MAP) and ethyl pyruvate (EP) treatment for domestic distribution and export. The selected ripe strawberries harvested on December 28, 2016 at the Sancheong farmhouse were transported to the laboratory for 2 h and tested. After a day's precooling at $4^{\circ}C$, the strawberries were divided into seven experimental groups. These groups were control, active MAP using low density polyethylene (LDPE), active MAP using polyamide (PA), active MAP using PA with EP treatment, passive MAP using LDPE, passive MAP using PA and passive MAP using PA with EP treatment. Quality analysis was carried out every 4 days during the storage period of 16 days. During the storage period of 16 days, MAP decreased from 3.5% to less than 1.1% in weight loss ratio compared with control, and decreased from 36% to less than 7% in fungal incidence. In the case of fungi in the EP treatment group, hyphae did not grow on the outside of the strawberry but grew to the inside. This tendency was similar to that in the low oxygen and high carbon dioxide environment of the MAP, the mycelium of the fungus did not grow outside of the strawberry. Fungi are the biggest problem in the distribution and export of strawberries, and these results suggest that MAP alone could inhibit mold and increase shelf life.

• Korean Journal of Soil Science and Fertilizer
• /
• v.22 no.4
• /
• pp.329-336
• /
• 1989

A series of green house experiment was conducted to find but the effect of fertilizer application and inoculation of rhizobium on the changes of amide-N, ureide-N and $NH_4-N$ concentration in stem and root exudates of soybean plant growth. The results obtained were summarized as follows ; 1. Five strains of indigenous Rhizobium japonicum-nitrogen fixing activity($C_2H_2$-reducing activity) was more than 6.4 to 20.1 nmole/hr/tube-were identified from 37 soil samples in 22 areas of farmers field throughout country. 2. These identified 5 strains of rhizobium were obtained high nitrate reductase but low ammonium and nitrite oxidase activities. Among 5 strains of rhizobium the Rhizobium japonicum RjK-134 was applied for this green house experiment. 3. Dry matter yield was increased by the combination of inoculation of Rhizobium japonicum RjK-134 with no fertilizer and without nitrogen fertilizer application. However, dry matter yield was decreased with application of N and NPK with inoculation of rhizobium. 4. The concentrations of amide-N and ureide-N were increased in xylem sap than that of root exudate and higher concentration was obtained ar 30 days after planting than flowering stage (45 days after planting). 5. The combination of NPK application with inoculation of Rhrizobium japonicum RjK-134 enhanced the increase of amide-N and ureide-N concentration in xylem sap and root exudate. 6. High ammonium-N concentration in xylem sap and root exudate were obtained in combination with without-fertilizer under no inoculation of rhizobium and N and NPK application with inoculation of rhizobium.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.6
• /
• pp.1107-1111
• /
• 2011

Organic fertilizers application has become a popular alternatives to reduce the dependence on chemical fertilizer in Korean farming systems. In this study, we evaluated the nitrogen (N) use efficiency and growth performance of Chinese cabbage grown by black vinyl mulching after application of organic and chemical fertilizers compared with no-mulching. The treatments included chemical fertilizer alone as control (NPK, N-$P_2O_5-K_2O$ : $320-78-198kg\;ha^{-1}$), organic fertilizer alone (OF100), 70% organic fertilizer and 30% chemical fertilizer (OF70+N30), and 30% organic fertilizer and 70% chemical fertilizer (OF30+N70), which were all applied in the no-mulching plots and in plots with black vinyl mulching. Daily means soil temperature was $2^{\circ}C$ higher in the black vinyl mulched treatments throughout the 54 days compared with no-mulched treatments. OF100 with black vinyl mulching gave highest soil inorganic N content. Also, Chines cabbage yield increased 46% by black vinyl mulched compared with no-mulching in OF100 treatment. Without mulching, N use efficiency was, 44, 26, 29, and 27% in NPK, OF100, OF70+N30, and OF30+N70, respectively. However, black vinyl mulching much more effectively increased N use efficiencies by 56, 55, 51, and 39% in the same treatments in the order as mentioned above. Conclusively, combined organic and chemical fertilizers application with black vinyl mulching could be good practical technique to reduce a amount of used nitrogen because of its greater ability to enhance N use efficiency.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.6
• /
• pp.852-857
• /
• 2010

This study was performed to explore the effect of the clay mineral illite on the improvement of bed soil and plant growth. Red pepper (Capsicum annuum L.) was used as a model vegetable crop. The experiment was performed during the whole six weeks in the glass house of the Chungbuk National University. Its seedlings were cultivated in the bed soil normally used for horticultural purpose. Of the seedlings cultured, the healthy and regular size of seed were selected and cultivated in the pots. They were treated with two forms of illite, particulate (PA) and powder (PW), at the following application rates: standard application[P1 (PA1, PW1), 1:20 (w/w)], two times[P2 (PA2, PW2), 1:10 (w/w)], and four times[P4 (PA4, PW4), 1:5 (w/w)] of standard application. Untreatment (P0) was used as a control pot. At six weeks of cultivation, their growth lengths were correspondingly increased as the application rate was increased ranging from P0, P1, P2, and to P4. Their growth length was a little greater on the application of powder illite (PW) than on the particulate illite (PA). Based on the plant analysis for the root, leaf, stem of red pepper, the uptake amounts of K, Ca, and Mg, were correspondingly increased, as the application rate was increased ranging from P0, P1, P2, and to P4, respectively. At the same application rate, their amounts taken up in the respective parts were higher on the application of PW illite than on the PA one. Especially the amounts of Ca and Mg were higher in the stem, leaf than root. Consequently, it appears that the illite treatment, especially, PW form of illite, enhance the growth of red pepper in the glass house during the whole six weeks of experiment.

• Journal of Mushroom
• /
• v.19 no.3
• /
• pp.210-215
• /
• 2021

For sterilization of microorganisms of the Listeria genus contaminating enoki mushroom, pilot mushroom grower equipped with air sterilization devices were developed. Sterilization experiments were performed using physical and chemical treatments. Internal temperature and humidity were controlled, maintaining 6.62℃±0.30 in the upper shelves, 6.46℃±0.24 in the middle shelves, and 6.48℃±0.25 in the lower shelves. Humidities were 79.97%±4.42, 79.43%±4.06, and 79.94±4.30%, respectively, with a temperature setting of 6.5℃, and a relative humidity of 75%. A suitable enoki mushroom cultivation stage for air sterilizer application was during the growth stage, with temperature in the 6.5~8.5℃ range, and humidity of 70~80%. At these same internal conditions, the ozone concentration in the mushroom cultivator was found to be 160 ppb during ion-cluster generator operation. After physical sterilization, the Listeria innocua survival rate was 0.1 to 0.9% using ion cluster sterilization, and 9.3 to 10.6% using UV air sterilization. The Listeria innocua survival rates on different materials were 9.3~10.6% on the metal specimen, and 9.9~16.2% on the plastic wrapper. The survival rate was particularly high on the rough side of the plastic wrapper. Ion cluster air sterilization is a labor-saving and effective method for suppressing the occurrence of Listeria bacteria on mushroom growers walls and shelves. For the plastic wrapper, chemical sterilization is more effective than physical sterilization.

• Journal of Applied Biological Chemistry
• /
• v.64 no.3
• /
• pp.253-261
• /
• 2021

In this study, the ginseng sprout has produced through smart farm was classified according to its size and divided into above-ground (AG) and below-ground (BG) parts to compare ginsenoside contents and antioxidant activity. In the case of the AG part, the total phenolic contents were the highest at 5.16 mg/g in medium (M) size and the lowest at 2.23 mg/g in largest (L) size. The BG part also showed the highest content in the M size, but there was no significant difference. Also, the total flavonoid contents were also high in the M size in both the AG (5.16 mg/g) and BG (1.28 mg/g) parts. The major ginsenosides in the AG part were Re (20.33-24.15 mg/g) > Rd (11.36-27.42 mg/g) > Rg1 (4.48-5.54 mg/g) and the main ginsenosides in the BG part were Rb1 (5.09-8.61 mg/g) > Re (4.48-5.54 mg/g) > Rc (3.11-4.11 mg/g) in orders. In the case of M size, Re and Rd were approximately 4- and 19-folds higher at 24.15 mg/g and at 27.42 mg/g in the AG part and 5.20 mg/g and 1.43 mg in the BG part, respectively. In addition, F3 and Rh1 were detected in the AG part, but not in the BG part. 2,2-diphenyl-1-picrylhydrazyl (74.95%), 2,4,6-azino-bis (3-ethylbenzothiazoline-6-sulphnoic acid) diammonium salt (94.47%), and hydroxyl (70.39%) radical scavenging activities and FRAP (2.169) assay were the highest in M size than other sizes.

• Journal of Bio-Environment Control
• /
• v.30 no.3
• /
• pp.196-205
• /
• 2021

This research was conducted in order to analyze the difference in yield through the changes in growth and measuring the photosynthesis efficiency in cherry tomatoes. Seedlings of cherry tomato 'Nonari' were used as scion and non-grafted control, while 4 different grafted tomatoes 'Powerguard', 'T1', 'L1', and 'B.blocking' were used as rootstocks. Plants grafted onto 'B.blocking' produced the highest fruit yield (417.5 g plant^-1), whereas non-grafted plant 'Nonari' had the lowest fruit yield, (354.2 g plant^-1) at the latter period of cherry tomatoes in May. The flowering position in May, plant grafted onto 'B.blocking', showed 14-17 cm, whereas non-grafted plant 'Nonari' showed 10-14 cm. The growth strength on May 15, non-grafted plant 'Nonari', showed 8.43 mm which was the lowest value among the treatments. Grafted plants kept the growth balance until the end of the harvest that led to an increase in fruit yield, while non-grafted plant weakened the vigor earlier that led to a decrease in fruit yield. Grafted plants showed higher values of chlorophyll fluorescence variables than the values of non-grafted plant. These results indicate that grafting influenced fruit yield which was observed as maintaining growth balance for longer and an increase in photosynthesis efficiency compared to non-grafting.

• Korean Journal of Breeding Science
• /
• v.41 no.4
• /
• pp.412-419
• /
• 2009

In order to study the inheritance of watermelon seed size, we used six watermelon lines of different seed sizes as parental lines. Six lines include three accessions, 'PI525088' with giant seed (GS), 'Charleston Gray' with big seed (BS), and 'NT' with normal medium size seed (NS), and three near isogenic lines, 'NTss' with small seed (SS), 'NTms' with micro seed (MS) and 'NTts' with tomato seed size (TS) bred by crosses between accession 'NT' of normal seed size and accession 'TDR' of the smallest seed size,. We inspected $F_1$, $F_2$, $BC_1F_1$ (P1), $BC_1F_1$ (P2) populations from the crosses between the adjacent seed size materials like $GS{\times}BS$, $BS{\times}NS$, $NS{\times}SS$, and $MS{\times}TS$, and two crosses between parental lines showing relatively big difference in seed size such as $GS{\times}TS$ and $NS{\times}TS$. Partial single dominant inheritance patterns were observed between $GS{\times}BS$, $NS{\times}SS$, and $MS{\times}TS$ and inheritance patterns based on two genes or more than two genes were speculated between $BS{\times}NS$. A very wide segregation range was observed from the population of $GS{\times}TS$ indicating many quantitative genes involved in the seed sizes. Overall, we speculated that more than six genes are involved in between the biggest and smallest seed size watermelon and three major genes between the normal seed size and the smallest seed size watermelon.