• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.11a
• /
• pp.106-109
• /
• 2006

The purpose of this study is to analyze the installed performance of the PW206C turbo shaft engine used in the development of the smart UAV(Unmanned Ariel Vehicle) by KARI(Korean Aerospace Research Institute). It mainly aims to investigate performance behavior at installed conditions using both inlet and exhaust losses generated by CFD analysis of the ducts. The ways employed to be able to analyze the performance extensively were mainly rallied out by performing design point analysis of the engine where the performance simulation results from the commercial program 'GASTURB 9' used for simulation were used as inlet boundary condition for the ducts in CFD program The use of CFD tool involve modeling of the ducts to conform with the stipulated shape and sizes as defined by KARI with a grid density that allows reasonable flow characteristics applicable to aircraft components. Respective values of Shaft horse power obtained by varying flight Mach number, Gas generator RPM and Altitude considering several losses inclusive of those estimated by use of CFD tool were then plotted at three conditions with the ECS-OFF, ECS-MAX and at un-installed condition. Reasonable results were obtained as a result of using computational fluid dynamics that can hence be justified as an alternative tool for use in future flow analysis of engine and components.

• The KSFM Journal of Fluid Machinery
• /
• v.14 no.5
• /
• pp.12-17
• /
• 2011

The seawater lift pump system is responsible for maintaining the open canal level to provide the suction flow of circulating water pump at the set point. The objective of this paper is to design a 2-stage mixed flow pump (for seawater lifting) by inverse design method and to evaluate the overall performance and the local flow fields of the pump by using a commercial CFD code. Rotating speed of the impeller is 1,750 rpm with the flow rate of 2,700 $m^3$/h. Finite volume method with structured mesh and realized k-${\varepsilon}$ turbulent model is used to guaranty more accurate prediction of turbulent flow in the pump impeller. The numerical results such as static head, brake horse power and efficiency of the mixed flow pump are compared with the design data. The simulated results are good agreement with the design data less 3% error.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.11a
• /
• pp.174-175
• /
• 2005

The purpose of this study is focused on the analysis of 3D complex flow and performance characteristics of a centrifugal pump with volute casing. The numerical analysis was performed by commercial code CFX-10 according to the variation of flow rate, which is changing from 5.847$m^3$/min to 6.865$m^3$/min. The rated rotational speed of close type impeller is 1750rpm. Turbulence model, k-${\omega}$ SST was selected to guaranty more accurate prediction of flow separation. The ICEM-CFD 10, reliable grid generation software was also adapted to secure high quality grid generation necessary for the reliable numerical simulation. The experimental results such as static head, brake horse power and efficiency of the centrifugal pump were compared with the numerical analysis results. The simulated results are good agreement with the experimental results less 5$%$ error.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.41 no.5
• /
• pp.346-352
• /
• 2008

Yellow croaker (Larimichthys polyactis) is a major target species of large pair trawl fishery in the East China Sea. To standardize catch per unit effort (CPUE) of yellow croaker for the large pair trawl fishery, generalized linear model (GLM) was applied to evaluate and eliminate the influence of the explanatory factors (year, month, horse power and gross tonnage of vessel) on daily catches per boat collected and compiled by National Fisheries Research and Development Institute (NFRDI) from 1990 to 2007 at the fishery auction places of Busan, Masan and Incheon in Korea. Results of GLM showed that all of the factors significantly influenced on CPUE, explaining 36% of the total deviance. The standardized CPUE indicated that the abundance of yellow croaker in 2000's was 1.7 times higher than the CPUE in 1990's.

• Journal of Energy Engineering
• /
• v.5 no.1
• /
• pp.42-49
• /
• 1996

Natural gas is one of the promising alternative fuels for automotive vehicles, because it has lower exhaust emissions and better fuel economy characteristics than those of gasoline, and can be used in conventional gasoline engines without major modifications. In the present study, a conventional gasoline engine was modified to a CNG engine, which can be operated with CNG only, and an engine bench test was performed to calibrate the operating parameters of the engine such as air fuel ratio, spark advance, etc. at various operating conditions. The modified CNG engine, then, was installed on a commercial gasoline vehicle and a vehicle driving test on chassis dynamometer was performed to examine the fuel economy and exhaust emission characteristics. As a result, the prototype CNG vehicle showed lower exhaust emissions and better fuel economy characteristics, but slightly reduced brake horse power, compared to the gasoline vehicle.

• 한국전산유체공학회:학술대회논문집
• /
• 2011.05a
• /
• pp.556-560
• /
• 2011

The seawater lift pump system is responsible for maintaining the open canal level to provide the suction flow of circulating water pump at the set point. The objective of this paper is to design a 2-stage mixed flow pump(for seawater lifting) by inverse design and to evaluate the overall performance and the local flow fields of the pump by using a commercial CFD code. Rotating speed of the impeller is 1,750 rpm with the flow rate of 2,700 $m^3/h$. Finite volume method with structured mesh and Realizable ${\kappa}-{\varepsilon}$ turbulent model is used to guaranty more accurate prediction of turbulent flow in the pump impeller. The numerical results such as static head brake horse power and efficiency of the mixed flow pump are compared with the reference data. Also, the periodic condition calculation method for the mixed flow pump was carried out in order to investigate the pump performance characteristics with the modification of impeller geometry.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.4
• /
• pp.147-153
• /
• 2012

The demands of the large scale machine tools, for instance, such as planomiller, turning machine, boring machine, NC machine, have been gradually increased in recent years. As the performances of machine tools and/or cutting tools are advanced, it is possible to perform high-speed and high-precision cutting works. The effective treatment of wet chip, which is discharged from cutting works, becomes very important problems. Therefore, this study is forced on the design of large scale machine tools using CATIA V5R18 and analysis of cutter, which is considered as essential equipment in large scale machine tools, using MSC.Nastran & MSC.Patran. Especially, the relations between tolerated load of cutter, driving horse power and rpm of driving shaft in chip processing system are investigated through analysis. As the results, the reliability of design could be improved by evaluating simulated numerical values, it showed that tolerated loads of supported part and edged part of cutter are 87,000N and 14,450N, respectively.

• Korean Journal of Rural Living Science
• /
• v.8 no.2
• /
• pp.93-110
• /
• 1997

The customs of women s riding horse was prevalent in thriving period. The face toilet was mainly used by Gau Chang pattern. Wha Jun (chinen; Hwa-Qun(화전), make-up on forehead), was influenced nearly by Gua Chang and distantly by India. Penciling eyebrows with blue was transmitted from persia. Chinese cosmetics was most influenced during Tang Dynasty for it's colorful make-up and facial decorations such as Aek-Whang(액황), Wha-Jung(화전), Jang-Yob(장엽), Swa-Hong(사홍) and those made many Dynasty, since those kinds of styles were the result of mixture between traditional chinese and western styles, it became so unique and diverse. The Declining period of the Tang Dynasty has begun from the turning point, resulting from Rebellion of An Ru Sha'. Rebellion of An Ru Sha' made the chinese people have a sense of precaution, and an antipathy against babarian. Furthermore, the power of Tang Dynasty onto the countries bordering on western china unfortunately was declining due to the defeat at 99 the Talas war in 751. As the fashion of ‘Ho’ disappeared the costume pattern was restored to the traditional Chinese style of large sleeve and broad width. However, the Tibetan mode was appeared in women's hair style and face toilet since Yuan Ha (801-812). In Song Dynasty, women's make-up and adorment were originated from Dang Dynasty, but those were more simple than in Dang Dynasty.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.43 no.4
• /
• pp.339-346
• /
• 2007

Estimating fishing capacity is one of current hot issues in the international fisheries. It is because that increased fishing capacity has caused not only fish stocks to be reduced, but also additional fishing costs to be incurred without additional incomes, which resulted in decrease of economically viability of fisheries. In order to solve this problem, FAO adopted 'the International Plan of Action for the Management of Fishing Capacity' in 1999 and recommended that member countries to measure fishing capacity and to implement the domestic action plan to reduce excess fishing capacity. This study is aimed at assessing fishing capacity of the octopus coastal trap fishery(OCTF) using data envelopment analysis(DEA) which is a method recommended by FAO. The DEA results on 10 individual OCTF vessels showed that the capacity utilization(CU) was a 0.93 on average, indicating some differences in CU among vessels(0.79-1.0). In addition, results of the sensitivity analysis revealed that under the current level of catch, the gross tonnage, horse power, days fished, and traps per trip could be reduced by 35%, 33%, 16%, and 18% on average, respectively.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.14 no.4
• /
• pp.59-64
• /
• 2010

Measurement uncertainty assessment was performed for altitude performance test for a turboshaft engine. Mathematical models of measurement were suggested for major performance parameters such as shaft horse power, fuel flow, specific fuel consumption, and airflow. The procedure was compared with the test of turbojet or turbofan engines. Uncertainty involved with the test condition measurement was assessed. Influence of the test condition measurement uncertainty on the corrected performance data was discussed. Uncertainty assessment result was provided for a example test case using a real altitude test facility. For major performance parameters, measurement uncertainties were assessed as 0.65~1.09% including the test condition measurement uncertainty, 0.36~0.94% not including it.