• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.03a
• /
• pp.514-519
• /
• 2006

The purpose of this study is to evaluate the performance of existing bridge foundation reinforced by battered micropiles. In order to do numerical method using a Finite element program was used to predict the micropile behavior and quantify their reinforcing effect to existing bridge foundations. In addition, effect of battered micropiles on existing foundations was compared with vertically reinforced bridge foundations. Based on the study performed, it was found that the use of battered micropile is more efficiently reducing displacement of existing foundation than vertically installed micropiles under vertical and horizontal loadings respectively. The batter angle of micropile was also found effective about $15^{\circ}\sim20^{\circ}$ to reduce the vortical displacement. The horizontal reinforcement effect is continuously larger with an increase in batter angle. So, it is believed that the results presented could give an idea to enhance in-service performance of existing bridge foundations reinforced by micropiles.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.3 no.3
• /
• pp.253-260
• /
• 1999

Main objective of this study is to examine the hysteretic behaviors and to evaluate the capacity of precast concrete (PC) large panel structures simulated from the prototype of 15-story building, Two 1/2 scaled precast concrete wall specimens and one monolithic reinforced concrete specimen were designed and tested under the cyclic loading conditions. The main parameter of test specimens in PC large panel structure is the type of details for vertical continuity of vertical steel in horizontal joint. Also the behaviors of PC large panel structures are compared with that of monolithic reinforcement concrete wall structure. From the results, the stiffness and energy dissipation ratio of the precast concrete specimens are shown little bit lower than those of monolithic reinforced concrete specimen. In the PC large panel structures, the specimen connected vertically by welding (strong connection) showed higher strength than that of the specimen connected vertically by joint box. However the failure pattern of the former showed more brittle than that of the latter due to the diagonal compressive failure of wall panels.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.13 no.3
• /
• pp.278-290
• /
• 1991

Prediction of the sop tissue changes following hard tissue movements is very important in the preoperative analysis of surgical changes of the patient who have orthognathic surgery. This study examined post operative changes of the mid-facial sop tissues in Koreans depending upon two major positional changes of the maxilla following Le Fort - I type osteotomy for orthognathic purposes. Sixty patients(41 males and 19 females) of Koreans were selected and divided into two groups according to directional change of movement of anterior bony structures of the Maxilla as follows : Group I (44 patients) was mooed anteriorly and/or inferiorly, and Group II (16 patients) was mooed posteriorly and/or superioly. Postoperative changes of the sop tissue measurements following hard tissue changes were examined on pre - and post - operative cephalometrics by means of computerized digitation methods and the ratios of changes were analysed. The results were obtained as follows : 1. In Group I, all of the sop tissue measures except the Pn was closely followed by the changes of the hard tissue measures in the horizontal plane, but the Sn and the Cm were only correlated to the vertical changes(p<0.001). In group II, all of the sop tissue measures excluding of the N' and the Pn were significantly correlated to the hard tissue measures in horizontal plane(p<0.001), but the Ls and Stm were only correlated relatively to the vertical changes of the ANS(p<0.01). 2. Predictable ratio of the Sn was 66% of the ANS or 56% of the A in the horizontal plane and 89% of the A in the vertical plane in Group I. In Group II, the Sn was predictable as 85% of the ANS or 70% of the A in the horizontal plane but was not predictable in vertical plane. 3. Predictable ratio of the Cm was 28% of the ANS or 50% of the A in the horizontal plane and 56% of the ANS or 36% of the A in the vertical plane in Group I. In Group II, the Cm was predictable horizontally as 74% of the A. Predictable ratio of the Pn was 30% of the ANS or 38% of the A in horizontal plane in Group I, but it was not predictable both horizontally and vertically in Group II. 4. Predictable ratio of the Ls was 52% of the Pr in Group I and 77% in Group II in the horizontal plane. The Stm was predictable as 34% of the pr or 22% of the I in the horizontal plane in Group I, and was also predictable as 55% of the pr or 68% of the I horizontally and 21% of the pr or 65% of the I vertically in Group II. 5. All ratios of change in the thickness. length and area of the upper lip following maxillary movement were statiscally correlated, however, mangitudes of them were meaningful clinically.

• Journal of Ocean Engineering and Technology
• /
• v.32 no.4
• /
• pp.222-227
• /
• 2018

Most underwater acoustic arrays for low frequency operation are deployed vertically, but a mid-range frequency horizontal array system is being developed by the Korea Research Institute of Ships and Ocean Engineering (KRISO). The horizontal array platform is deployed underwater and kept in place by weather vaning mooring. This is essential because it is nearly impossible to keep a submerged body at a given position in the water without any external force. Hence, the horizontal array platform can maintain the desired position in the presence of a weak tidal current. The objective of this study is to design an underwater platform that can maintain its horizontal position in a weak current. First, the authors investigated various virtual models, selected one of the models, and performed a small model test of the selected model at a basin. We calculated the external forces associated with the 2D motion, and then we conducted a large basin test followed by a circulation water channel test for the manufactured array platform. The results of the simplified 2D motion calculation essentially matched the results of the underwater test.

• Journal of Korea Multimedia Society
• /
• v.25 no.7
• /
• pp.912-921
• /
• 2022

Autonomous vehicles equipped with cameras, such as robots, fork lifts, or cars, can be found frequently in industry sites or usual life. Those cameras show planar motion because the vehicles usually move on a plane. Sometimes the cameras in fork lifts moves vertically. The cameras under planar and vertical motion provides useful properties for horizontal or vertical lines that can be found easily and frequently in our daily life. In this paper, some useful back-projection properties are suggested, which can be applied to horizontal or vertical line images captured by a camera under planar and vertical motion. The line images are back-projected onto a virtual plane that is parallel to the planar motion plane and has the same orientation at the camera coordinate system regardless of camera motion. The back-projected lines on the virtual plane provide useful information for the world lines corresponding to the back-projected lines, such as line direction, angle between two horizontal lines, length ratio of two horizontal lines, and vertical line direction. Through experiments with simple plane polygons, we found that the back-projection properties were useful for estimating correctly the direction and the angle for horizontal and vertical lines.

• 한국연소학회:학술대회논문집
• /
• 2004.11a
• /
• pp.117-123
• /
• 2004

The burning characteristics of interacting coal particles in a convective flow are numerically investigated at various Reynolds numbers. The transient combustion of 2-dimensionally arranged particles, both the fixed particle distances of 5 radii to 20 radii horizontally and 3 radii to 24 radii vertically, is studied. The results obtained from the present numerical analysis reveal that the transient flame configuration and retardation of particle temperature augmentation with the horizontal or vertical particle spacing substantially influence devolatilization process and carbon conversion ratio of interacting particles. Volatile release and carbon conversion ratio of the second particle with decreasing horizontal and vertical particle spacing decrease gradually, whereas those of the first particle with decreasing vertical particle spacing increases due to flow acceleration. When the vertical particle spacing is smaller than $6R_{o}$, volatile release and carbon conversion ratio of the second particle decrease greatly due to reduction of flame penetration depth.

• Journal of Ocean Engineering and Technology
• /
• v.19 no.4 s.65
• /
• pp.9-14
• /
• 2005

In the present paper, the wave absorbing performance of the fully submerged horizontal porous plates has been investigated, numerically and experimentally. The submerged porous system is composed of multi-layered horizontal porous plates that are clamped at the vertical setwall, which are slightly inclined and placed vertically, in parallel, with spacing. The hydrodynamic interaction of incident waves with the rigid porous multi-layered plates was formulated within the context of linear wave-body interaction theory and Darcy's law. In order to validate the effectiveness of the present computing code, the numerical results were compared with the analytical and experimental results. It is found that triple horizontal porous plates with slight inclination, if properly tuned for wave energy dissipation against the standing waves in front of the vertical wall, can have high performances in reducing the reflected wave amplitudes against the incident waves over a wide range of wave frequency.

• Fire Science and Engineering
• /
• v.15 no.1
• /
• pp.41-46
• /
• 2001

The flow induced by a vertically impinging circular jet under a horizontal plate is investigated by visualization technique, using kerosene smoke in nitrogen gas to visualize the vortex flow and impinging flow. The light source was the sheet beam of Ar-Ion laser. The vertical and horizontal images scattering of kerosene smoke were recorded by the high speed CCD camera and the video camera. The instantaneous velocity of the vortex and the mean velocity of the smoke front were measured from the acquisited images.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.4
• /
• pp.712-717
• /
• 2006

In this paper, a new integral imaging method with horizontal parallax only is proposed by modified use of elemental images pickuped from conventional integral imaging. The modified elemental images are obtained by magnifying single horizontal elemental image vertically and from which 3D images could be reconstructed. The proposed method can provide us large reduction of transmission information data for elemental images by eliminating the vertical parallax. The feasibility of our approach is experimentally demonstrated and its results are presented.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.548-549
• /
• 2014

Omni-directional shear-horizontal magnetostrictive patch transducers have a disadvantage that magnetic flux leakage into the plate when it is installed on a ferromagnetic plate. The leakage produces poor transduction efficiency and unwanted wave mode excitation which should be avoided in guided wave inspections of large plate-like structures. In order to resolve these problems, we newly developed a method to reduce the leakage into the plate. In the method, the patch and the magnet are vertically lifted off and their optimal positions are determined by numerical simulations. Also, the verification of the developed method is successfully verified by experiments.