• 설비공학논문집
• /
• 제11권5호
• /
• pp.658-668
• /
• 1999

The objective of the present study is to investigate the effect of experimental parameters on the hydrodynamic characteristics in a horizontal tee-type evaporator using R-22. The experimental apparatus consisted of an unheated tee-type test section, a liquid-vapor separator, a preheated, mass flow meters, a plate heat exchanger, pump, and other measurement devices. The experimental parameters were mass flux(500 and 600kg/$m^2$s), inlet quality(0.1~0.3) and separation ratio(0.3~0.7). Absolute pressure at the inlet of the test section was 0.652 MPa. The branch-to-inlet inner diameter ratio was 0.61. Pressure gradient at the branch section was larger than that at the run section at the same separation ratio. Pressure drop per unit length increased at the run section and decreased at the branch section as the separation ratio increased. Pressure drop predicted by the separated flow model agreed with experimental data within -35 to +16%. Generally, predicted values showed similar trend with the data. Mass flow ratio of vapor refrigerant was affected by the inlet quality more than the mass flux.

• 한국조경학회지
• /
• 제21권1호
• /
• pp.13-30
• /
• 1993

The purpose of this study was to present data to the landscape planning and design through analyzing correlation between visual preference of users and nonusers and the landscape of hole in golf couses. Stimulus objects were selected from the 18 holes in Tae-gu Country Club. Preference value was judged through photo simulation by 35 subjects photographed at Tee and Interpoint (IPI, IP2), and classified into three landscape types and nine landscape components from photo analysis by researcher. For test of difference between groups toward each stimulus, t-test was used, and Duncantest, Correlation analysis for finding out correlation between preference degree and the landscape of each hole. The results of this study were as follows: As a result of analysis of preference value between groups for each hole, it has been shown that there was scarcely difference with each other. Form the relation between preference degree and spacial structure of hole, the holes making up a superior preference group have been shown that the greater part of the holes had a downward slope or a gentle slope mostly and then a visible ratio of fairway was high, and had diversified scenery by a lotus pond, a solitary planting tree, the roll of a fairway, facilities for convenience, etc. The holes making up a low-ranking preference group have been shown that the greater part of the holes had upward slope or a similar slope to it and had characteries of the bad condition of lawn, the nearby factories and odors, the monotonous scenery of a fairway, an unreasonable mixing of holes, etc. From the relation between preference degree and landscape components forming hole, it has been shown that the preference degree between users and nonusers had positive correlation to the occupied ratio of space of landscape components at Tee and Approach. At Tee, it has been shown that the preference degree of two groups were related with a lawn surface of fairway negatively, a lotus pond, a sky positively, and the preference degree of nonusers was related with iron-top for electric transmission positively. At Approach, it has been shown that the preference degree of two groups were related with iron-top for electric transmission negatively, and the preference degree of nonusers was related with a building positively. From the relation between preference degree group to each hole and the occupied ratio of space of landscape types, it has been shown that the constituent ratio of a high-ranking group was 1:2.4:2.2 and a low-ranking group was 1:4.1:5.1 among vertical type, horizontal type and background at Tee, but the constituent ratio of space of a high-ranking group was similar to a low-ranking group at Approach.

• 한국강구조학회 논문집
• /
• 제14권1호
• /
• pp.121-130
• /
• 2002

This paper presents the tensile behavior of a Concrete-Filled Square Steel Tubular (CFT) column to H-beam welded connections. These connections were externally reinforced with T-shaped stiffeners at the junction of CFT column and beam. The tensile loading tests of eighteen tee-joint connections and finite element analysis using ANSYS were carried out. The main parameters of tests are as follows: 1) the thickness of Square Steel Tubular Column : 6 mm, 9 mm, 2) the strength ratios of tensile strength of horizontal stiffeners to tensile strength of beam flange : 70 %, 100 %, 150 %, 3) the strength ratios of shear strength of vertical stiffeners to tensile strength of beam flange : 80 %, 115 %, 160 %. The results of the tests demonstrate that overall behavior and failure modes of all the specimens are governed mainly by the horizontal stiffeners rather than the vertical stiffeners, and the vertical stiffener played only a role in transferring load introduced from beam to column.

• 한국강구조학회 논문집
• /
• 제16권5호통권72호
• /
• pp.641-652
• /
• 2004

철골 기둥-보 강축 접합부에 대한 연구는 그 동안 국내외에서 오랜 기간 연구가 진행되어 내진성능 및 접합부의 강도를 개선시킬 수 있는 많은 접합 형식이 개발되어 사용 중에 있으나, 약축 접합 형식에 대한 연구는 거의 없는 실정이다. 또한 현재 국내에서는 시공성을 고려하여 기존의 브라켓형식 용접 접합부를 선호하고 있으나, 용접량이 많아 취성적인 거동이 우려되며 과대 설계된 경향이 있다. 본 연구의 실험 결과에서 기존 브라켓 형식 용접접합은 용접량이 과도한 것으로 나타났으며, 기둥 웨브와 보의 웨브의 용접은 불필요한 것으로 판단된다. 그리고 본 연구에서 제안한 새로운 기둥-보 약축 접합형식들에 대한 실험 결과에서 기존 브라켓형식 용접접합보다 우수한 내력 및 연성을 보유하여 구조적으로 안전함을 확인할 수 있었다.