• 터널과지하공간
• /
• 제15권1호
• /
• pp.39-46
• /
• 2005

터널 단층대에서 수평시추로 조사한 막장전방의 암반 상태를 공학적 암반분류법인 RMR값으로 평가하였고 이를 터널 굴착 후 막장을 관찰하여 결정한 RMR값과 비교 분석하였다. 수평시추로 예측한 RMR값은 비교적 정확하여 터널 굴진 후 막장을 관찰하여 구한 RMR값과 큰 차이가 없었다. 그러나 일부 구간에서는 수평시추와 막장관찰로 구한 RMR값의 차이가 약 50까지 발생하였고 이를 RMR 평가항목으로 분석한 결과 불연속면의 상태에 대한 평점에서 24의 차이가 나타났고 암질지수와 단축압축강도 평점에서 각각 15와 13의 차이로 나타났다. 두 방법에서 평가한 RMR값의 차이를 줄이기 위해서는 터널 내 수평시추공의 위치를 터널의 안정성에 가장 큰 영향을 줄 수 있는 곳으로 선정하고 불연속면의 상태에 대한 평가는 불연속면의 연속성, 분리 틈, 풍화도 등 5개의 소항목 각각에 대해 5단계로 구분한 세부평점을 적용하여야 할 것이다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.895-898
• /
• 2004

We propose configurations for a transflective in-plane switching (IPS) cell using muti-domain structures. Usually, the cell configurations for a transflective liquid crystal(LC) cell have a complicated structure, because retardation change of transmissive part and reflective part are not same. The transflective LC cell should have two configurations for each part, such as a multi-cell gap structure. With the ion-beam alignment and the horizontal switching LC cell, a simple structure for a transflective LC cell is proposed. The configuration only adopts one cell gap structure, which may help the enhancement of a yield. Their original optical properties in conventional transmissive and reflective type IPS liquid crystal dispaly(LCD) are kept, it shows the wide-viewing angle and the good wavelength dispersion characteristics.

• 대한기계학회논문집A
• /
• 제30권8호
• /
• pp.1016-1023
• /
• 2006

When one opens the door of a microwave oven during its operation, twisting deformation of the door occurs, which may cause leakage of microwave through the gap between the door and the front plate. A numerical optimization is implemented to minimize the gap by maximizing twisting stiffness of the door of the oven. Design variables are deformed, which describe the shape of the bead in the horizontal and vertical flanges of the door frame. To minimize the twisting deformation, Two optimal design problems to find shapes of the bead in the flange are established. The problems are solved by a numerical optimization technique, their results being evaluated.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 춘계학술대회 논문집(한국공작기계학회)
• /
• pp.453-457
• /
• 2001

One of the major limitations of productivity and quality in metal cutting is the machining accuracy of machine tools. The machining accuracy is affected by geometric and thermal errors of the machine tools. In this study, the compensation device is manufactured in order to compensate thermal error of machine tools under the real-time. This paper models of the thermal errors for error analysis and develops on-the-machine measurement system by which the volumetric error are measured and compensated. The thermal error is modeled by means of angularity errors of a column and thermal drift error of the spindle unit which are measured by the touch probe unit with a star type styluses, a designed spherical ball artifact, and five gap sensors. In order to compensate thermal characteristics under several operating conditions, experiments performed with five gap sensors and manufactured compensation device on the horizontal machining center.

• Journal of Electrical Engineering and Technology
• /
• 제9권1호
• /
• pp.106-113
• /
• 2014

Rotor eccentricity is one of the major factors that directly influence the security of horizontal electrical machines, and the critical speed of the shaft has a close relationship with vibration. This paper deals with the influence of thermal expansion on the rotor eccentricity and critical speed in large dry submersible motors. The dynamic eccentricity (where the rotor is still turning around the stator bore centre but not its own centre) and critical speed of a three-phase squirrel-cage submersible induction motor are calculated via hybrid analytical/finite element method. Then the influence of thermal expansion is investigated by simulation. It is predicted from the study that the thermal expansion of the rotor and stator gives rise to a significant air-gap length decrement and an inconspicuous slower critical speed. The results show that the thermal expansion should be considered as an impact factor when designing the air gap length.

• 한국전기전자재료학회논문지
• /
• 제14권12호
• /
• pp.1041-1047
• /
• 2001

In this paper, reduction characteristics of the ac flashover voltage in the horizontal air gap of sphere-sphere/needle-needle electrode system were investigated when the combustion flame was present near the high-voltage electrodes. The voltage and current waveforms were measured, when the flashover is occurred, in order to examine the flashover polarity by flame. The reduction characteristics of ac flashover voltage were discussed with the thermal ionization process, the relative air density and the deflection phenomena in the shape of flames that changed by the corona wind and coulomb\`s force. As the results of an experimental investigation, It was found that the reduction of flashover voltages in sphere-sphere system, in comparison with the no-flame case, are 79.9 [%] for k=0, 82.9 [%] for k=0.5, 87.5 [%] for k=1.0, 85.0 [%] for h=0 [cm], 40.8 [%] for h=5 [cm] and 28.2 [%] for h=9 [cm] when ac voltage is applied.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 추계학술대회논문집 - 한국공작기계학회
• /
• pp.449-453
• /
• 2000

In metal cutting, the machining accuracy is more affected by thermal errors than by geometric errors. This paper models of the thermal errors for error analysis and develops on-the-machine measurement system by which the volumetric error are measured and compensated. The thermal error is modeled by means of angularity errors of a column and thermal drift error of the spindle unit which are measured by the touch probe unit with a star type styluses, a designed spherical ball artifact, and five gap sensors. In order to analyze the thermal characteristics under several operating conditions, experiments performed with the touch probe unit and five gap sensors on the vertical and horizontal machining centers.

• Nuclear Engineering and Technology
• /
• 제55권3호
• /
• pp.1118-1124
• /
• 2023

Experimental study on the fluidelastic instability (FEI) of a curved tube bundle in single phase downward cross flow is investigated for the design qualification and analysis input preparation of helical coiled steam generator tubing. A 6×9 normal square curved tube array with equal and different vertical/horizontal pitch-to-diameter ratio was under-tested up to 6 m/s in term of gap flow velocity to measure the critical velocity for FEI. The critical velocity for FEI was measured at the turning point from the vibration amplitude plot along the gap flow velocity. Our test results were compared with straight tube results and published data in the design guideline. The applicability of the current design guidelines to a curved tube bundle is also assessed. We found that introducing frequency difference in a curved tube array increases the critical velocity for fluidelastic instability.

• 터널과지하공간
• /
• 제24권6호
• /
• pp.405-417
• /
• 2014

고준위폐기물처분장에서 갭채움재는 완충재와 뒷채움재의 성능을 좌우하는 중요한 공학적방벽의 구성요소이다. 본 논문에서는 갭채움재에 대한 해외 기술현황을 조사하고, 이를 통하여 갭채움재의 개념, 제조기술, 성형특성, 설치기술에 대한 연구결과들을 정리하였다. 갭채움재 개념은 처분방식과 처분개념에 따라서 나라마다 약간씩 차이가 있었다. 갭채움재 물질로는 대부분 벤토나이트를 사용하였고, 충전제로 점토를 사용하였다. 갭채움재는 펠렛, 과립상, 또는 펠렛-과립상 혼합물의 형태로 사용되었다. 갭채움재 펠렛 제조에는 정압축, 롤러압축, 압출-컷팅 방법 등이 사용되었으며, 이 중, 실험과 실제 현장에서의 펠렛 소요량을 감안하여 많은 나라들이 롤러압축방법과 압출-컷팅방법에 대한 기술 확보에 집중하였다. 펠렛 성형특성 실험결과, 펠렛의 건조밀도와 건전성은 수분함량, 구성물질, 제조방법, 펠렛 크기에 민감하였고, 제작 시 압축하중에는 상대적으로 덜 민감하였다. 갭채움재의 설치방법으로는 수직처분공 완충재 갭에서는 부어넣기(pouring) 방법, 붓고 다지기(pouring and tamping) 방법, 진동을 주며 부어넣기(pouring with vibration) 방법 등이 시도되었으며, 수평처분공 완충재와 처분터널의 뒷채움재 갭에서는 숏크리트 기술을 이용한 불어넣기(blowing by use of shotcrete technology) 방법과 오거를 이용한 정치 및 다지기(auger placement and compaction) 방법 등이 시도되었다. 그러나 이 방법들은 아직 기술적으로 초기단계에 있어 앞으로도 계속적인 연구가 이루어질 것으로 예상되었다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회(1)
• /
• pp.635-636
• /
• 2005