• 지구물리와물리탐사
• /
• 제14권4호
• /
• pp.274-281
• /
• 2011

최근 백령도 해역에서 발생한 규모 4.3에 해당하는 중규모 지진(2011년 6월 17일)으로부터 관측된 지반진동 파형을 이용하여 지진원 기구 및 수평 응답스펙트럼을 분석하였다. 분석결과를 한반도의 응력방향과 비교하였고 또한 국내 원자력 관련 구조물의 내진설계 기준과 국내 일반 구조물 및 건축물 내진설계기준과 각각 비교하였다. 지진원 연구에 이용된 지반진동은 3개 관측소(각 관측소에서 3성분)에서 관측된 전파형에 대해 모멘트텐서 기본식을 이용한 격자탐색법을 적용하여 분석하였다. 지진원기구에서 제시하는 주압축응력 방향은 ENE-WSW 방향으로 기존 한반도 전체의 주 응력방향과 대체로 유사하였다. 원자력 관련 구조물의 내진설계 기준과 국내 일반 구조물 및 건축물 내진설계기준과 각각 비교하였다. 국내 원자력시설물의 내진기준으로 이용되고 있는 Reg. Guide 1.60과 비교한 결과 특히 약 3 Hz 이상의 높은 고유진동수 영역에서 Reg. Guide 1.60 기준보다 높은 값을 보여 주었다. 또한 국내 일반 구조물 및 건축물 내진설계기준인 표준 설계응답스펙트럼을 비교한 결과 약 0.8초 이하의 단주기 영역의 전체 대역(SD 지반조건)에서 자료처리 결과가 기준을 크게 초과하였다. 향후 국내 지진활동 실정에 적합한 내진설계 기준 마련을 위해 관측자료의 질적 향상 및 양적인 축적 등을 통하여 특히 높은 고유진동수 대역에서 수평응답스펙트럼 기준의 보수성을 재고할 필요가 있다.

• 한국항만학회지
• /
• 제9권1호
• /
• pp.45-56
• /
• 1995

Investigation of the physical behavior of dredged material disposal in coastal water includes estimations of water column concentration in the receiving water, exposure time, the initial deposition pattern as well as thickness of material at the dumping fields near the estuary area. Calculation based on vertical setting and horizontal advection of single particles ignore the effects of bulk properties of the disposed material, vertical and horizontal diffusion, and material dilution due to the entrainment of ambient water during descent. This paper focuses on the spatial and temporal changes in the dumping fields for the water column and bottom at a hypothetically confined coastal water, where the ambient time-invariant velocity and density profiles are applied, within the initial time period following the instantaneous release of the dredged material. This model accounts the behavior of material after release divided into three phases: convective descent, dynamic collapse and long-term passive dispersion

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1082-1087
• /
• 2003

In this paper, we address the development of magnetic levitation positioning system. This planar magnetic levitator employs four permanent magnet liner motors. Each motor generates vertical force for suspension against gravity, as well as horizontal force for drive levitation object called a platen This stage can generate six degrees of freedom motion by the vertical and horizontal force. We derived the mechanical dynamics equation using lagrangian method and used coenergy to express an electromagnetic force. We proposed control algorithm for the position and posture control from its initial value to its desired value using sliding mode control. Some simulation result is provided to verify the effectiveness of the proposed control scheme.

• 충청수학회지
• /
• 제25권4호
• /
• pp.731-738
• /
• 2012

Let L(M) be the bundle of all linear frames over $M,\;u$ an arbitrarily given point of L(M), and ${\nabla}\;:\;\mathfrak{X}(M)\;{\times}\;\mathfrak{X}(M)\;\rightarrow\;\mathfrak{X}(M)$ a linear connection on L(M). Then the following results are well known: the horizontal subspace and the connection form at the point $u$ may be written in terms of local coordinates of $u\;{\epsilon}\;L(M)$ and Christoffel's symbols defined by $\nabla$. These results are very fundamental on the study of the theory of connections. In this paper we show that the local expressions of those at the point $u$ do not depend on the choice of a local coordinate system around the point $u\;{\epsilon}\;L(M)$, which is rarely seen. Moreover we give full explanations for the following fact: the covariant derivative on M which is defined by the parallelism on L(M), determined from the connection form above, coincides with $\nabla$.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2007년도 추계학술대회 논문집
• /
• pp.173-177
• /
• 2007

This paper describes the simulations on the actual measurement analysis and lighting design for recreational sports facility. Based on illumination requirements, sports may be divided into multidirectional sports and unidirectional sports. Typical multidirectional aerial sports include Jokcu. These sports require well distributed horizontal illumination and uniformity according to aiming. Therefore, this paper estimates horizontal illuminance and uniformity ratio by actual measurement of sports lighting at recreational Jokcu court in Cheju National University and evaluation of sports lighting conditions for optimal design by computer simulation.

• 설비공학논문집
• /
• 제12권5호
• /
• pp.502-510
• /
• 2000

Evaporation heat transfer characteristics were studied in a horizontal tube using R22/R114 non-azotropic refrigerant mixture. the heat transfer coefficient was high in the upper part for pure refrigerants, and heat transfer coefficient was low in the lower part for refrigerant mixtures. In the low quality region where nucleate boiling was dominant, the average heat transfer coefficient was low. In the region where forced convection was dominant, heat transfer coefficient was high. Results show that the heat transfer coefficient for pure refrigerants obtained by experiments were lower than those of Yoshida et al. but agreed well with Jung et al., and Chen et al. data. But the heat transfer coefficients for refrigerant mixtures were lower about 20% than those predicted by the equation for pure refrigerant.

• 천문학회보
• /
• 제38권2호
• /
• pp.62.2-62.2
• /
• 2013

Recent spectroscopic observations have provided evidence for complex chemical evolution by supernovae and/or asymptotic giant branch (AGB) stars in the two metal-poor globular clusters (GCs) NGC2419 and M15. In particular, the horizontal branches (HBs) of these metal-poor GCs are very extended in the Hertzsprung-Russell diagram. The origin of these peculiar features, as well as that for the Sandage period-shift effect observed in these clusters, are yet to be understood. Here we show, by constructing population models including the Nitrogen enhanced subpopulation, that the second generation populations in these clusters would be enhanced not only in Helium, but also in Nitrogen. This working hypothesis can simultaneously explain the observed extended feature on the HB and the period-shift of RR Lyrae variables.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권6호
• /
• pp.906-915
• /
• 2004

In this paper, we address the development of magnetic levitation positioning system. This planar magnetic levitator employs four permanent magnet liner motors. Each motor generates vertical force for suspension against gravity, as well as horizontal force for driving levitation object called a platen. This stage can generate six degrees of freedom motion by the vertical and horizontal force. We derived the mechanical dynamics equation using Lagrangian method and used coenergy to express an electromagnetic force. We proposed a control algorithm for the position and posture control from its initial value to its desired value using sliding mode control. Some simulation results are provided to verify the effectiveness of the proposed control scheme.

• Journal of Advanced Marine Engineering and Technology
• /
• 제10권4호
• /
• pp.67-77
• /
• 1986

The information on the heat transfer characteristics, flow pattern and pressure drop, are very important for the desing of general heat exchanger, refrigerating system, air conditioning system and energy recovery system. In these systems, water or lubricating oil contained in working fluid affects greatly the flow and heat transfer condition and this phenomena must be considered in the practical design. An experiment has been performed for studying the flow and heat transfer characteristics of the forced convective horizontal flow of R-113 under the range of the liquid single phase state to the boiling flow state. Basic experimental results are obtained in the case that water or lubricating oil does not contaminate in the test fluid. Experimental results are as follows; (1) The local heat transfer coefficients in the nucleate boiling region and transition boiling region are almostly ten times as large as that of liquid single phase flow. (2) The measured heat transfer coefficient in the present experimental range is relatively agreed well with the predicted value from the various experimental results for the boiling flow.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1995년도 추계학술발표회논문집(1)
• /
• pp.364-370
• /
• 1995

The One-dimensional fin model is used to analyze the angular wall temperature variation of long horizontal lines, where stratification could result in top-to-bottom differences in wall temperatures. The top and bottom sections are treated separately and coupled by boundary conditions. The thermal stratification analysis is focused on the effects of the heat transfer rates at the pipe surface. The results show that the heat transfer rate at the pipe surface is the controlling parameter which reduce significantly the temperature difference in pipe circumferential direction. The one-dimensional fin modelling analysis results are verified by comparison with the operating PWR test data. The circumferential temperatures of pipe calculated by one-dimensional fin modelling agree well with the PWR plant test data.