• 전기학회논문지
• /
• 제60권1호
• /
• pp.221-229
• /
• 2011

Recently, intermodal transportation systems are significantly considered as enhanced technique or future railroad logistics. These are aimed for particularly reducing complicated job process in the railroad based transportation and relevant logistic cost in economic viewpoint. In this paper we suggest a horizontal transfer system using hydro-motor and hydro-cylinder for intermodal transportation system. This system can assist to transfer the containers horizontally for train logistics automations.

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권4호
• /
• pp.825-832
• /
• 2001

This study was experimentally performed to investigate freezing behavior of sea water along horizontal cooled a circular tube with bubbly flow. The experiments were carried out for a variety of parameter, such as sea water velocity, air-bubble flow rate, and cooled-tube temperature. The shape of freezing layer, freezing rate and salinity of frozen layer were observed and measured. And the flow patterns around cooled tube were visualized using the PIV to analyze the relationship between the flow structure and the freezing characteristics. It was found that the experimental parameters gave a great influence on the freezing rate and the salinity of the frozen layer.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회(1)
• /
• pp.635-636
• /
• 2005

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 12th Asian Congress of Fluid Mechanics
• /
• pp.45.5-45.5
• /
• 2008

• 대한기계학회논문집
• /
• 제13권6호
• /
• pp.1310-1320
• /
• 1989

본 논문에서는 비교적 많은 계산이 수행되어온 수평원관 주위의 상변화 열전달 문제를 예로 들어, 상변화 물질이 유한한 열전도율을 갖는 일정 두께의 원관 주위에 존재할 때의 상변화 문제에 대하여 초기 액상의 영역을 임의로 가정하는 불합리점을 제거하고 문제를 풀 수 있는 수치해석 방법을 제시하고자 한다.

• 대한기계학회논문집B
• /
• 제21권2호
• /
• pp.252-263
• /
• 1997

Steady-state two-dimensional natural convective heat transfer in horizontal cylindrical annuli was studied by solving the governing equations based on the primitive variables. Emphasis was put on the occurrence of the multiple solutions at a given set of parameter values, and on the determination of the bifurcation points at which those multiple solutions begin to branch out. The multicellular flow pattern from the results of melting process in an isothermally heated horizontal cylinder for high Rayleigh numbers, was used as initial guesses for the field variables. This was succeeded in new bifurcation point to tetracellular solutions for an identical set of parameter variables of previous works. The close examination of flow pattern transition around bifurcation point was also conducted. It was found that the mechanisms of flow transition are different depending on the critical Rayleigh number of bifurcation point.

• 대한치과보철학회지
• /
• 제40권2호
• /
• pp.156-171
• /
• 2002

The purpose of this study was to measure and compare the strains produced by screw-tightening implant frameworks fabricated by aye different fabrication methods; (1) one-piece cast using plastic sleeve, (2) one-piece cast using gold cylinder, (3) laser welding, (4) soldering, and (5) electrical discharge machining, and also to measure and compare the strains produced when the order of screw tightening was changed A research model incorporating eighteen strain gages was made to measure the fit of implant frameworks in three dimensions. Three implants aligned in an arc were fixed on the top ends of the L-shape aluminum bars of the research model, and standard abutments were joined to the implants with abutment screws. Five types of implant framework were placed on the abutments and screwed by a torque wrench using 10 Ncm. Under the conditions of this study, the following conclusions were drawn: 1. The electrical discharge machining group showed the smallest magnitude of strain, followed by the soldering group, the laser welding group, the one-piece cast group using gold cylinder, and the one-piece cast group using plastic sleeve. However, among the magnitude of strain for the remaining groups except the electrical discharge machining group, there were not significant differences. 2. When the order of screw tightening was changed, there were not significant differences in the magnitude of strain. 3. In comparison with the electrical discharge machining group, the laser welding group and the one-piece cast groups showed greater horizontal distortion and the soldering group showed greater horizontal and vertical distortion.

• The Journal of Advanced Prosthodontics
• /
• 제6권1호
• /
• pp.39-45
• /
• 2014

PURPOSE. The aim of the present study was to evaluate the accuracy of three techniques for correction of cast implant bars. MATERIALS AND METHODS. Thirty cast implant bars were fabricated on a metal master model. All cast implant bars were sectioned at 5 mm from the left gold cylinder using a disk of 0.3 mm thickness, and then each group of ten specimens was corrected by gas-air torch soldering, laser welding, and additional casting technique. Three dimensional evaluation including horizontal, vertical, and twisting measurements was based on measurement and comparison of (1) gap distances of the right abutment replica-gold cylinder interface at buccal, distal, lingual side, (2) changes of bar length, and (3) axis angle changes of the right gold cylinders at the step of the post-correction measurements on the three groups with a contact and non-contact coordinate measuring machine. One-way analysis of variance (ANOVA) and paired t-test were performed at the significance level of 5%. RESULTS. Gap distances of the cast implant bars after correction procedure showed no statistically significant difference among groups. Changes in bar length between pre-casting and post-correction measurement were statistically significance among groups. Axis angle changes of the right gold cylinders were not statistically significance among groups. CONCLUSION. There was no statistical significance among three techniques in horizontal, vertical and axial errors. But, gas-air torch soldering technique showed the most consistent and accurate trend in the correction of implant bar error. However, Laser welding technique, showed a large mean and standard deviation in vertical and twisting measurement and might be technique-sensitive method.

• 대한기계학회논문집
• /
• 제14권5호
• /
• pp.1264-1271
• /
• 1990

본 연구에서는 회전 깃(rotor blade)을 폭 방향과 시위방향으로 많은 평면 페 널(panel)들로 나누어 이에 말굽쇠 형 화류(horseshoe vortex)를 분포시키는 양력면 (lifting surface)으로 대치하고 후류는 깃상의 순환(circulation)분포에 의해 그 크 기가 결정되는 와도(vorticity)를 와류격자로 대치하는 와류격자법(Vortex Lattice Method`VLM)을 사용하여 HAWT의 공기역학적 성능 예측을 시도하였다. 그리고 후류의 형상은 근 후류(near wake)와 원후류(far wake)로 나누어 근 후류는 깃의 후연(trail- ing edge)에서의 속도를 갖고 와선(vortex line)이 움직이게 하여 결정하였고 원 후류 는 반무한대 원형화류 실린더(semi-infinite circular vortex cylinder)로 취급하여 결정하였다.

• 설비공학논문집
• /
• 제9권2호
• /
• pp.104-111
• /
• 1997

The freezing phenomenon of saturated water with the supercooled region in a horizontal circular cylinder has been studied experimentally by using the holographic real time interferometry technique. From the experiments, it was found that there were three types of freezing patterns. The first is the annular ice layer growing from the cylinder surface at a high cooling rate; the next is the asymmetric ice layer at a moderate cooling rate; and the last is the instantaneous ice layer growth over the full region at lower cooling rate. As the water was coolde from room temperature to the subfreezing point passing through the density inversion point, the freezing pattern was largely affected by the inversion phenomenon, which had much effected the free convection and was susceptible to influences from the cooling rate. When the cooling rate is high, supercooling energy is released before the water is sufficientry mixed by free convection. On the other hand, when the cooling rate is low, there is much time for the water to be mixed by free convection. This seems to be the reason why the different ice layer growths occur.